74F3038 Quad 2-input NAND 30Ohm Driver (open Collector)

The 74F3038 is a high current Open-Collector Line Driver composed of four 2-input NAND Gates It has been designed to deal with the transmission line effects of PC boards which appear when fast edge rates are used.The 74F3038 CAN sink 160mA with a VCC as low as 4.5V. This guarantees incident wave switching with VOL not more than 0.8V while driving impedances as low as 30W. This is applicable with any combination of outputs using continuous duty.The AC specifications for the 74F3038 were determined using the standard FAST load for open-collector parts of 50pF capacitance, a 500W pull-up resistor and a 500W pull-down resistor. Reducing the load resistors to 100W will decrease the tPLH propagation delay by approximately 50% while increasing tPHL only slightly. The graph of typical propagation delay versus load resistor (see AC Characteristics section for Graph) shows a spline fit curve from four measured data points, RL = 30W, RL = 100W, RL = 300W, and RL = 500W.
By NXP Semiconductors
74F3038 's Packages74F3038 's pdf datasheet
N74F3038D SO
N74F3038N




74F3038 Pinout, Pinouts
74F3038 pinout,Pin out
This is one package pinout of 74F3038,If you need more pinouts please download 74F3038's pdf datasheet.

74F3038 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

74F3038 Pb-Free 74F3038 Cross Reference 74F3038 Schematic 74F3038 Distributor
74F3038 Application Notes 74F3038 RoHS 74F3038 Circuits 74F3038 footprint
Hot categories