74HC/HCT4352 Dual 4-channel Analog Multiplexer/demultiplexer With Latch

The 74HC/HCT4352 are high-speed Si-gate CMOS devices. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4352 are dual 4-channel Analog Multiplexers/Demultiplexers with common select Logic Each multiplexer has four independent inputs/outputs (nY0 to nY3) and a common input/output (nZ). The common channel select Logics include two select inputs (S0 and S1), an active LOW enable input (E1), an active HIGH enable input (E2) and a latch enable input (LE). With E1 LOW and E2 HIGH, one of the four switches is selected (low impedance ON-state) by 0 and S1. The data at the select inputs may be latched by using the active LOW latch enable input (LE). When LE is HIGH, the latch is transparent. When either of the two enable inputs, E1 (active LOW) and 2 (active HIGH), is inactive, all Analog Switches are turned off. VCC and GND are the supply voltage pins for the digital control inputs (S0, S1, LE, E1 and E2). The VCC to GND ranges are 2.0 to 10.0 V for HC and 4.5 to 5.5 V for HCT. The Analog inputs/outputs (nY0 to nY3, and nZ) CAN swing between VCC as a positive limit and VEE as a negative limit. VCC - VEE may not exceed 10.0 V. For operation as a digital multiplexer/demultiplexer, VEE is connected to GND (typically ground).
By NXP Semiconductors
74HCT4352 's Packages74HCT4352 's pdf datasheet



74HCT4352 Pinout, Pinouts
74HCT4352 pinout,Pin out
This is one package pinout of 74HCT4352,If you need more pinouts please download 74HCT4352's pdf datasheet.

74HCT4352 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

74HCT4352 Pb-Free 74HCT4352 Cross Reference 74HCT4352 Schematic 74HCT4352 Distributor
74HCT4352 Application Notes 74HCT4352 RoHS 74HCT4352 Circuits 74HCT4352 footprint