74HC/HCT4353 Triple 2-channel Analog Multiplexer/demultiplexer With Latch

The 74HC/HCT4353 are high-speed Si-gate CMOS devices. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4353 are triple 2-channel Analog Multiplexers/Demultiplexers with two common enable inputs (E1 and E2) and a latch enable input (LE). Each multiplexer has two independent inputs/outputs (nY0 and nY1), a common input/output (nZ) and select inputs (S1 to S3).Each multiplexer/demultiplexer contains two bidirectional Analog Switches each with one side connected to an independent input/output (nY0 and nY1) and the other side connected to a common input/output (nZ).With E1 LOW and E2 HIGH, one of the two switches is selected (low impedance ON-state) by S1 to S3. The data at the select inputs may be latched by using the active LOW latch enable input (LE). When LE is HIGH, the latch is transparent. When either of the two enable inputs, E1 (active LOW) and E2 (active HIGH), is inactive, all Analog Switches are turned off.VCC and GND are the supply voltage pins for the digital control inputs (S1 to S3, LE, E1 and E2). The VCC to GND ranges are 2.0 to 10.0 V for HC and 4.5 to 5.5 V for HCT. The Analog inputs/outputs (nY0 and nY1, and nZ) CAN swing between VCC as a positive limit and VEE as a negative limit. VCC - VEE may not exceed 10.0 V. For operation as a digital multiplexer/demultiplexer, VEE is connected to GND (typically ground).
By NXP Semiconductors
74HCT4353 's Packages74HCT4353 's pdf datasheet
74HC4353D SO
74HC4353N DIP
74HCT4353D SO
74HCT4353N DIP




74HCT4353 Pinout, Pinouts
74HCT4353 pinout,Pin out
This is one package pinout of 74HCT4353,If you need more pinouts please download 74HCT4353's pdf datasheet.

74HCT4353 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

74HCT4353 Pb-Free 74HCT4353 Cross Reference 74HCT4353 Schematic 74HCT4353 Distributor
74HCT4353 Application Notes 74HCT4353 RoHS 74HCT4353 Circuits 74HCT4353 footprint