16 Mega Bits (2M X 8 Bit) CMOS 5.0 Volt-only, Uniform Sector Flash Memory

The A29016 is a 16Mbit, 5.0 volt-only Flash memory organized as 2,097,152 bytes of 8 bits. The 8 bits of data appear on I/O0 - I/O7. The A29016 is offered in, 44-pin SOP and 40-pin or 48-Pin TSOP packages. This device is designed to be programmed in-system with the standard system 5.0 volt VCC supply. Additional 12.0 volt VPP is not required for in-system write or erase operations. However, the A29016 CAN also be programmed in standard EPROM programmers. The A29016 has the first toggle bit, I/O6, which indicates whether an Embedded Program or Erase is in progress, or it is in the Erase Suspend. Besides the I/O6 toggle bit, the A29016 has a second toggle bit, I/O2, to indicate whether the addressed sector is being selected for erase. The A29016 also offers the ability to program in the Erase Suspend mode. The standard A29016 offers access times of 55, 70, and 90 ns, allowing high-speed Microprocessors to operate without wait states. To eliminate bus contention the device has separate chip enable (CE ), write enable (WE ) and output enable (OE ) controls. The device requires only a single 5.0 volt power supply for both read and write functions. Internally generated and regulated voltages are provided for the program and erase operations. The A29016 is entirely software command set compatible with the JEDEC single-power-supply Flash standard. Commands are written to the command Register using standard Microprocessor write Timings Register contents serve as input to an internal state-machine that controls the erase and programming circuitry. Write cycles also internally latch addresses and data needed for the programming and erase operations. Reading data out of the device is similar to reading from other Flash or EPROM devices. Device programming occurs by writing the proper program command sequence. This initiates the Embedded Program algorithm - an internal algorithm that automatically times the program pulse widths and verifies proper program margin. Device erasure occurs by executing the proper erase command sequence. This initiates the Embedded Erase algorithm - an internal algorithm that automatically preprograms the array (if it is not already programmed) before executing the erase operation. During erase, the device automatically times the erase pulse widths and verifies proper erase margin. The Unlock Bypass mode By AMIC Technology Corporation
A29016 's PackagesA29016 's pdf datasheet
A29016M-55 SOP
A29016M-55F SOP
A29016V-55 TSOP
A29016V-55F TSOP
A29016W-55 TSOP
A29016W-55F TSOP
A29016M-70 SOP
A29016M-70F SOP
A29016V-70 TSOP
A29016V-70F TSOP
A29016W-70 TSOP
A29016W-70F TSOP
A29016M-90 SOP
A29016M-90F SOP
A29016V-90 TSOP
A29016V-90F TSOP
A29016W-90 TSOP
A29016W-90F TSOP

A29016 Pinout, Pinouts
A29016 pinout,Pin out
This is one package pinout of A29016,If you need more pinouts please download A29016's pdf datasheet.

A29016 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

A29016 Pb-Free A29016 Cross Reference A29016 Schematic A29016 Distributor
A29016 Application Notes A29016 RoHS A29016 Circuits A29016 footprint
Hot categories