8-Channel Source Drivers

Recommended for high-side switching applications that benefit from separate Logic and load grounds, these devices encompass load supply voltages to 50 V and output currents to -500 mA. These 8-channel source drivers are useful for interfacing between low-level Logic and high-current loads. Typical loads include relays, solenoids, lamps, stepper and/or servo motors, print hammers, and LEDs
All devices may be used with 5 V Logic systems TTL, Schottky TTL, DTL, and 5 V CMOS. The device packages offered are electrically interchangeable, and will withstand a maximum output off voltage of 50 V, and operate to a minimum of 5 V. All devices in this series integrate input current limiting resistors and output transient suppression Diodes and are activated by an active high input.
The suffix A indicates an 18-lead plastic dual in-line package with copper lead frame for optimum power dissipation. Under normal operating conditions, these devices will sustain 120 mA continuously for each of the eight outputs at an ambient temperature of +50C and a supply of 15 V.
By Allegro MicroSystems, Inc.
A2982 's PackagesA2982 's pdf datasheet



A2982 Pinout, Pinouts
A2982 pinout,Pin out
This is one package pinout of A2982,If you need more pinouts please download A2982's pdf datasheet.

A2982 Application circuits
A2982 circuits
This is one application circuit of A2982,If you need more circuits,please download A2982's pdf datasheet.


Related Electronics Part Number

Related Keywords:

A2982 Pb-Free A2982 Cross Reference A2982 Schematic A2982 Distributor
A2982 Application Notes A2982 RoHS A2982 Circuits A2982 footprint