Ionization Smoke Detector With Interconnect

The A5364 is a low-current, CMOS circuit providing all of the required features for an ionization-type Smoke detector A networking capability allows as many as 125 units to be interconnected so that if any unit senses smoke all units will sound their alarm. In addition, special features are incorporated to facilitate alignment and test of the finished Smoke detector The device is Recognized by Underwriters Laboratories for use in smoke alarms that comply with Standard UL217.
The internal Oscillator and Timing circuitry keep standby power to a minimum by powering down the device for 1.66 seconds and sensing for smoke for only 10 ms. Every 24 on-off cycles, a check is made for a low battery condition. By substituting other types of Sensors or a Switch for the ionization detector, this very-lowpower device CAN be used in numerous other battery-operated safety/security applications.
By Allegro MicroSystems, Inc.
A5364 's PackagesA5364 's pdf datasheet
A5364CA
A5364CA-T




A5364 Pinout, Pinouts
A5364 pinout,Pin out
This is one package pinout of A5364,If you need more pinouts please download A5364's pdf datasheet.

A5364 Application circuits
A5364 circuits
This is one application circuit of A5364,If you need more circuits,please download A5364's pdf datasheet.


Related Electronics Part Number

Related Keywords:

A5364 Pb-Free A5364 Cross Reference A5364 Schematic A5364 Distributor
A5364 Application Notes A5364 RoHS A5364 Circuits A5364 footprint
Hot categories