AAT1236 | High Efficiency White LED Driver For Backlight And Keypad

The AAT1236 is a highly integrated, high efficiency power solution for white LED and keypad backlights in mobile/portable devices. It is based on a switching boost converter which steps up the single cell lithium-ion/polymer battery voltage to drive 5 strings of series-connected white LEDs with precision current regulation. The AAT1236 is capable of driving a total of four LEDs per channel. The boost converter CAN produce an output drive of up to 24V at 100mA. The high switching frequency (up to 2MHz) provides fast response to load transients and allows the use of small external components. A fully integrated control circuit simplifies the design and reduces total solution size. A two-wire I2C serial digital Interface is used to individually turn each output sink on/off and adjust the LED current by group. Unlike conventional pulse width modulation (PWM) control of LED brightness, the AAT1236 drives the LEDs with constant, non-pulsating current. The Interface is fully compliant to the Fast/Standard mode I2C specification, allowing a transfer rate of up to 400kHz. A similar device is also available with a proprietary Advanced Simple Serial Control (AS2Cwire) single wire interface; please see the AAT1235 datasheet. The AAT1236 is available in a Pb-free, thermally-enhanced 16-pin 3x4mm TDFN package and is specified for operation over the -40C to +85C temperature range.
By Advanced Analogic Technologies, Inc.
AAT1236 's PackagesAAT1236 's pdf datasheet

AAT1236 Pinout will be updated soon..., now you can download the pdf datasheet to check the pinouts !
AAT1236 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

AAT1236 Pb-Free AAT1236 Cross Reference AAT1236 Schematic AAT1236 Distributor
AAT1236 Application Notes AAT1236 RoHS AAT1236 Circuits AAT1236 footprint