AAT2806 | Dual, High Efficiency Charge Pump For White LED Backlight And Flash Applications

The AAT2806 is a dual Charge Pump designed to support both the white LED backlight and Flash applications for systems operating with lithium-ion/polymer batteries. The backlight Charge Pump is capable of driving up to four LEDs at a total of 80mA. The current sinks may be operated individually or in parallel for driving higher current LEDs To maximize power efficiency, the Charge Pump operates in 1X,1.5X, or 2X mode, where the mode of operation is automatically selected by comparing the forward voltage of each LED with the input voltage. AnalogicTech's S2Cwire (Simple Serial Control) serial digital input is used to enable, disable, and set current for each LED with an 8-level logarithmic scale plus four low-current settings down to 50A for optimized efficiency, with a typical operating quiescent current of 50A. The Flash Charge Pump is a Charge Pump doubler with a regulated output voltage. It is designed to deliver 120mA of continuous current and up to 250mA of pulsed current. It has an independent enable pin for improved power savings. The AAT2806 has thermal protection and built-in soft-start circuitry. A low-current shutdown feature disconnects the load from VIN and reduces quiescent current to less than 1A.
By Advanced Analogic Technologies, Inc.
AAT2806 's PackagesAAT2806 's pdf datasheet
AAT2806IXN-4.5-T1




AAT2806 Pinout, Pinouts
AAT2806 pinout,Pin out
This is one package pinout of AAT2806,If you need more pinouts please download AAT2806's pdf datasheet.

AAT2806 Application circuits
AAT2806 circuits
This is one application circuit of AAT2806,If you need more circuits,please download AAT2806's pdf datasheet.


Related Electronics Part Number

Related Keywords:

AAT2806 Pb-Free AAT2806 Cross Reference AAT2806 Schematic AAT2806 Distributor
AAT2806 Application Notes AAT2806 RoHS AAT2806 Circuits AAT2806 footprint