AAT3122 | High Efficiency 1x/1.5x Fractional Charge Pump For White LED Applications

The AAT3122 is a low noise, constant frequency Charge Pump DC/DC converter that uses a dual mode load Switch (1X) and fractional (1.5X) conversion to increase efficiency in white LED applications. With input voltages ranging from 2.7V to 5.5V, the device CAN produce an output current of up to 120mA. A low external parts count (two 1F flying capacitors and two small bypass capacitors at VIN and OUT) makes the AAT3122 ideally suited for small battery-powered applications. AnalogicTechs Simple Serial Control (S2Cwire) Interface is used to enable, disable, and set the LED drive current with a 32-level logarithmic scale LED brightness control. The AAT3122 has a Thermal Management system to protect the device in the event of a short circuit condition on any of the output pins. Built-in soft-start circuitry prevents excessive inrush current during start-up. High switching frequency enables the use of small external capacitors. A low shutdown current feature disconnects the load from VIN and reduces quiescent current to less than 1A. The AAT3122 provides a single current source output that CAN be used to drive up to six LEDs at 20mA each. The AAT3122 is available in a TSOPJW-12 package.
By Advanced Analogic Technologies, Inc.
AAT3122 's PackagesAAT3122 's pdf datasheet
AAT3122ITP-T1 TSOP




AAT3122 Pinout, Pinouts
AAT3122 pinout,Pin out
This is one package pinout of AAT3122,If you need more pinouts please download AAT3122's pdf datasheet.

AAT3122 Application circuits
AAT3122 circuits
This is one application circuit of AAT3122,If you need more circuits,please download AAT3122's pdf datasheet.


Related Electronics Part Number

Related Keywords:

AAT3122 Pb-Free AAT3122 Cross Reference AAT3122 Schematic AAT3122 Distributor
AAT3122 Application Notes AAT3122 RoHS AAT3122 Circuits AAT3122 footprint