AAT3131 | High Efficiency 1x/1.5x Fractional Charge Pump For White LED Applications

The AAT3131 is a low noise, constant frequency Charge Pump DC/DC converter that uses a dual mode load Switch (1X) and fractional (1.5X) conversion to maximize efficiency for white LED applications. The device CAN be used to produce current levels up to 20mA in three of its outputs, and 30mA in one of its outputs to drive LEDs from a 2.7V to 5.5V input. Outputs may be operated individually or paralleled for driving higher-current LEDs Low external parts counts (two 1F flying capacitors and two small 1F capacitors at VIN and OUT) make the AAT3131 ideally suited for small battery-powered applications. AnalogicTechs Simple Serial Control (S2Cwire) Interface is used to enable, disable, and set the LED drive current in two groups: the three 20mA outputs and the single 30mA output with multiple level logarithmic scales. The AAT3131 has a Thermal Management system to protect the device in the event of a short circuit condition at the output pin. Built-in soft-start circuitry prevents excessive inrush current during start-up. A high Charge Pump switching frequency enables the use of very small external capacitors. A low current shutdown feature disconnects the load from VIN and reduces quiescent current to less than 1A. The AAT3131 is available in very small 12-pin TSOPJW package.
By Advanced Analogic Technologies, Inc.
AAT3131 's PackagesAAT3131 's pdf datasheet
AAT3131ITP-T1




AAT3131 Pinout, Pinouts
AAT3131 pinout,Pin out
This is one package pinout of AAT3131,If you need more pinouts please download AAT3131's pdf datasheet.

AAT3131 Application circuits
AAT3131 circuits
This is one application circuit of AAT3131,If you need more circuits,please download AAT3131's pdf datasheet.


Related Electronics Part Number

Related Keywords:

AAT3131 Pb-Free AAT3131 Cross Reference AAT3131 Schematic AAT3131 Distributor
AAT3131 Application Notes AAT3131 RoHS AAT3131 Circuits AAT3131 footprint