AAT3134 | High Efficiency 1x/1.5x Fractional Charge Pump For White LED Applications

The AAT3134 is a low noise, constant frequency Charge Pump DC/DC converter that uses a dual mode Load Switch (1X) and fractional (1.5X) conversion to maximize efficiency for white LED applications. The device CAN be used to produce current levels up to 20mA in each of its six outputs to drive LEDs from a 2.7V to 5.5V input. Outputs may be operated individually or paralleled for driving higher-current LEDs Low external parts counts (two 1F flying capacitors and two small 1F capacitors at VIN and OUT) make the AAT3134 ideally suited for small battery-powered applications. AnalogicTech's Simple Serial Control (S2Cwire) Interface is used to enable, disable, and set the LED drive current in two groups of four outputs and two outputs with multiple-level, independently-controlled brightness scales. The AAT3134 has a Thermal Management system to protect the device in the event of a short circuit condition at the output pin. Built-in soft-start circuitry prevents excessive inrush current during start-up. A high Charge Pump switching frequency enables the use of very small external capacitors. A low current shutdown feature disconnects the load from VIN and reduces quiescent current to less than 1A. The AAT3134 is available in a 16-pin quad QFN package.
By Advanced Analogic Technologies, Inc.
AAT3134 's PackagesAAT3134 's pdf datasheet

AAT3134 Pinout, Pinouts
AAT3134 pinout,Pin out
This is one package pinout of AAT3134,If you need more pinouts please download AAT3134's pdf datasheet.

AAT3134 Application circuits
AAT3134 circuits
This is one application circuit of AAT3134,If you need more circuits,please download AAT3134's pdf datasheet.

Related Electronics Part Number

Related Keywords:

AAT3134 Pb-Free AAT3134 Cross Reference AAT3134 Schematic AAT3134 Distributor
AAT3134 Application Notes AAT3134 RoHS AAT3134 Circuits AAT3134 footprint