AAT3142 | High Efficiency 1x/1.5x/2x Charge Pump For White LED Applications

The AAT3142 is a low noise, constant frequency Charge Pump DC/DC converter that uses a tri-mode load Switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for white LED applications. The device produces current levels up to 30mA on each of its three current source outputs to drive various arrangements of LEDs from a 2.7V to 5.5V input. Outputs may be operated individually or in parallel for driving higher current LEDs A low external parts count (two 1F flying capacitors and two small 1F capacitors at VIN and CP) make the AAT3142 ideally suited for small battery-powered applications. AnalogicTech's Simple Serial Control (S2Cwire)digital input is used to enable, disable, and set the LED drive current with a 32-level logarithmic scale LED brightness control. The AAT3142 has a Thermal Management system to protect the device in the event of a short-circuit condition at an output pin. Built-in soft-start circuitry prevents excessive inrush current during start-up. A high Charge Pump switching frequency enables the use of very small external capacitors. In shutdown mode, the device disconnects the load from VIN and reduces quiescent current to less than 1A. The AAT3142 is available in the very small 12-pin TSOPJW package.
By Advanced Analogic Technologies, Inc.
AAT3142 's PackagesAAT3142 's pdf datasheet
AAT3142ITP-T1 TSOP




AAT3142 Pinout, Pinouts
AAT3142 pinout,Pin out
This is one package pinout of AAT3142,If you need more pinouts please download AAT3142's pdf datasheet.

AAT3142 Application circuits
AAT3142 circuits
This is one application circuit of AAT3142,If you need more circuits,please download AAT3142's pdf datasheet.


Related Electronics Part Number

Related Keywords:

AAT3142 Pb-Free AAT3142 Cross Reference AAT3142 Schematic AAT3142 Distributor
AAT3142 Application Notes AAT3142 RoHS AAT3142 Circuits AAT3142 footprint