AAT3143 | High Efficiency 1x/1.5x/2x Mode Charge Pump With PWM Control For White LED Applications

The AAT3143 is a low noise, constant frequency Charge Pump DC/DC converter that uses a tri-mode load Switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for white LED applications. The AAT3143 CAN deliver current levels up to 80mA to connect white LEDs connected to the four current source outputs from a 2.7V to 5.5V input. The current source outputs may source up to 20mA each and may be operated individually or in parallel for driving higher-current LEDs A low external parts count (two 1F flying capacitors and two small 1F capacitors at VIN and VOUT) makes the AAT3143 ideally suited for small battery-powered applications. Output current, and therefore brightness, is controlled via externally applied Pulse Width Modulation (PWM) control. Typically, PWM frequencies of up to 50kHz CAN be applied. The AAT3143 has a Thermal Management system to protect the device in the event of a short-circuit condition at the voltage output pin. Built-in soft-start circuitry prevents excessive inrush current during start-up. A high Charge Pump switching frequency allows the use of very small external capacitors. A low current shutdown feature disconnects the load from VIN and reduces quiescent current to less than 1A. The AAT3143 is available in a Pb-free, space-saving, 2.85x3.0mm 12-pin TSOPJW package.
By Advanced Analogic Technologies, Inc.
AAT3143 's PackagesAAT3143 's pdf datasheet

AAT3143 Pinout, Pinouts
AAT3143 pinout,Pin out
This is one package pinout of AAT3143,If you need more pinouts please download AAT3143's pdf datasheet.

AAT3143 Application circuits
AAT3143 circuits
This is one application circuit of AAT3143,If you need more circuits,please download AAT3143's pdf datasheet.

Related Electronics Part Number

Related Keywords:

AAT3143 Pb-Free AAT3143 Cross Reference AAT3143 Schematic AAT3143 Distributor
AAT3143 Application Notes AAT3143 RoHS AAT3143 Circuits AAT3143 footprint