2.7 V To 5.5 V, <100 μA, 8-Bit nanoDAC®, SPI Interface In SC70 Package
The AD5601 AD5611 AD5621 members of the nanoDAC family, are single, 8-/10-/12-bit, buffered, voltage output DACs that operate from a single 2.7 V to 5.5 V supply, consuming typically 75 A at 5 V. The parts come in a tiny SC70 package. Their on-chip precision output Amplifier allows Rail-to-Rail output swing to be achieved. The AD5601 AD5611 AD5621 utilize a versatile 3-wire serial Interface that operates at Clock rates up to 30 MHz and is compatible with SPI, QSPI, MICROWIRE, and DSP Interface standards.
The reference for the AD5601 AD5611 AD5621 is derived from the power supply inputs and, therefore, gives the widest dynamic output range. The parts incorporate a power-on reset circuit, which ensures that the DAC output powers up to 0 V and remains there until a valid write to the device takes place.
The AD5601 AD5611 AD5621 contain a power-down feature that reduces current consumption to typically 0.2 A at 3 V, and provides software-selectable output loads while in power-down mode. The parts are put into power-down mode over the serial Interface
The low power consumption of these parts in normal operation makes them ideally suited to portable battery-operated equipment. The combination of small package and low power makes these nanoDAC devices ideal for level-setting requirements, such as generating bias or control voltages in space-constrained and power-sensitive applications.
Product Highlights Available in a space-saving, 6-lead SC70 package. Low power, single-supply operation. The AD5601 AD5611 AD5621 operate from a single 2.7 V to 5.5 V supply and with a maximum current consumption of 100 A, making them ideal for battery-powered applications. The on-chip output Buffer Amplifier allows the output of the DAC to swing Rail-to-Rail with a typical slew rate of 0.5 V/s. Reference is derived from the power supply. High speed serial Interface with Clock speeds up to 30 MHz. Designed for very low power consumption. The Interface powers up only during a write cycle. 6. Power-down capability. When powered down, the DAC typically consumes 0.2 A at 3 V. Power-on reset with brownout detection.
Applications Voltage level setting Portable battery-powered instruments Digital gain and offset adjustment Programmable voltage and current sources Programmable Attenuators
Data Sheet, Rev. C, 7/07
By Analog Devices, Inc.
|AD5601 Pb-Free||AD5601 Cross Reference||AD5601 Schematic||AD5601 Distributor|
|AD5601 Application Notes||AD5601 RoHS||AD5601 Circuits||AD5601 footprint|