16-Bit, Serial, 100 KSPS Sampling ADC.
The AD677 is a multipurpose 16-bit serial output analog-to- digital converter which utilizes a switched-capacitor/charge redistribution architecture to achieve a 100 kSPS conversion rate (10 s total conversion time). Overall performance is optimized by digitally correcting internal nonlinearities through on-chip autocalibration.
The AD677 circuitry is segmented onto two monolithic chips- a digital control chip fabricated on Analog Devices DSP CMOS process and an Analog ADC chip fabricated on our BiMOS II process. Both chips are contained in a single package.
The AD677 is specified for ac (or "dynamic") parameters such as S/(N+D) Ratio, THD and IMD which are important in signal processing applications. In addition, dc parameters are specified which are important in measurement applications.
The AD677 operates from +5 V and 12 V supplies and typically consumes 450 mW using a 10 V reference (360 mW with 5 V reference) during conversion. The digital supply (VDD) is separated from the Analog supplies (VCC, VEE) for reduced digital crosstalk. An Analog ground sense is provided to remotely sense the ground potential of the signal source. This CAN be useful if the signal has to be carried some distance to the A/D converter Separate Analog and digital grounds are also provided.
The AD677 is available in a 16-pin narrow plastic DIP, 16-pin narrow side-brazed ceramic package, or 28-lead SOIC. A parallel output version, the AD676 is available in a 28-pin ceramic or plastic DIP. All models operate over a commercial temperature range of 0C to +70C or an industrial range of -40C to +85C.
By Analog Devices, Inc.
|AD677 Pb-Free||AD677 Cross Reference||AD677 Schematic||AD677 Distributor|
|AD677 Application Notes||AD677 RoHS||AD677 Circuits||AD677 footprint|