10 MHz, 20 V/μs, G = 1, 10, 100, 1000 iCMOS® Programmable Gain Instrumentation Amplifier
The AD8253 is an Instrumentation Amplifier with digitally programmable gains that has G input impedance, low output noise, and low distortion making it suitable for interfacing with Sensors and driving high sample rate Analog-to-digital converters (ADCs). It has high bandwidth of 10 MHz, low THD and fast settling time of 615 ns to 0.001%. Offset drift and gain drift are specified to 1.2 V/C and 10 ppm/C, respectively for G = 1000. In addition to its wide input common voltage range, it boasts a high common-mode rejection of 80 dB at G = 1 from dc to 50 kHz. The combination of precision dc performance coupled with high speed capabilities make the AD8253 an excellent candidate for data acquisition. Furthermore, this monolithic solution simplifies design and manufacturing, and boosts performance of instrumentation by maintaining a tight match of internal resistors and Amplifiers
The AD8253 user Interface consists of a parallel port that allows users to set the gain in one of two different ways (see Figure 1 for the functional block diagram). A 2-bit word sent via a bus CAN be latched using the WR input. An alternative is to use transparent gain mode where the state of Logic levels at the gain port determines the gain.
The AD8253 is available in a 10-lead MSOP package and is specified over the 40C to +85C temperature range, making it an excellent solution for applications where size and packing density are important considerations.
Applications Data acquisition Biomedical analysis Test and measurement
Data Sheet, Rev. PrA, 9/07
By Analog Devices, Inc.
|AD8253 Pb-Free||AD8253 Cross Reference||AD8253 Schematic||AD8253 Distributor|
|AD8253 Application Notes||AD8253 RoHS||AD8253 Circuits||AD8253 footprint|