DC To 50 MHz, Dual I/Q Demodulator And Phase Shifter

The AD8333 is a dual-phase shifter and I/Q Demodulator that enables coherent summing and phase alignment of multiple Analog data channels. It is the first solid-state device suitable for beamformer circuits, such as those used in high performance medical ultrasound equipment featuring CW Doppler. The RF inputs Interface directly with the outputs of the dual-channel, low noise preamplifiers included in the AD8332.
A divide-by-4 circuit generates the internal 0 and 90 phases of the local Oscillator (LO) that drive the mixers of a pair of matched I/Q Demodulators
The AD8333 CAN be applied as a major element in Analog beamformer circuits in medical ultrasound equipment.
The AD8333 features an asynchronous reset pin. When used in arrays, the reset pin sets all the LO dividers in the same state. Sixteen Discrete phase rotations in 22.5 increments CAN be selected independently for each channel. For example, if CH1 is used as a reference and the RF signal applied to CH2 has an I/Q phase lead of 45, CH2 CAN be phase aligned with CH1 by choosing the correct code.
Phase shift is defined by the output of one channel relative to another. For example, if the code of Channel 1 is adjusted to 0000 and that of Channel 2 to 0001 and the same signal is applied to both RF inputs, the output of Channel 2 leads that of Channel 1 by 22.5.
The I and Q outputs are provided as currents to facilitate summation. The summed current outputs are converted to voltages by a high dynamic-range, current-to-voltage (I-V) converter, such as the AD8021 configured as a Transimpedance Amplifier The resultant signal is then applied to a high resolution ADC such as the AD7665 (16 bit/570 kSPS).
The two I/Q Demodulators CAN be used independently in other nonbeamforming applications. In that case, a Transimpedance Amplifier is needed for each of the I and Q outputs, four in total for the dual I/Q Demodulator
The dynamic range is 161 dB/Hz at each I and Q output, but the following Transimpedance Amplifier is an important element in maintaining the overall dynamic range, and attention needs to be paid to optimal component selection and design.
The AD8333 is available in a 32-lead LFCSP (5 mm 5 mm) package for the industrial temperature range of 40C to +85C.
Applications Medical imaging (CW ultrasound beamforming) Phased array systems (radar and adaptive antennas) Communication receivers
Data Sheet, Rev. B, 5/07
By Analog Devices, Inc.
AD8333 's PackagesAD8333 's pdf datasheet
AD8333-EVALZ
AD8333ACPZ-REEL LFCSP
AD8333ACPZ-REEL7 LFCSP
AD8333ACPZ-WP LFCSP




AD8333 Pinout, Pinouts
AD8333 pinout,Pin out
This is one package pinout of AD8333,If you need more pinouts please download AD8333's pdf datasheet.

AD8333 Application circuits
AD8333 circuits
This is one application circuit of AD8333,If you need more circuits,please download AD8333's pdf datasheet.


Related Electronics Part Number

Related Keywords:

AD8333 Pb-Free AD8333 Cross Reference AD8333 Schematic AD8333 Distributor
AD8333 Application Notes AD8333 RoHS AD8333 Circuits AD8333 footprint