High Performance, Low Power, Dual 8-Bit, 500 MSPS A/D Converter

The ADC08500 is a low power, high performance CMOS Analog-to-digital converter that digitizes signals to 8 bits resolution at sampling rates up to 500 MSPS. Consuming a typical 0.8 Watts at 500 MSPS from a single 1.9 Volt supply, this device is guaranteed to have no missing codes over the full operating temperature range. The unique folding and interpolating architecture, the fully differential Comparator design, the innovative design of the internal sample-and-hold Amplifier and the self-calibration scheme enable a very flat response of all dynamic parameters beyond Nyquist, producing a high 7.5 ENOB with a 250 MHz input signal and a 500 MHz sample rate while providing a 10 -18 B.E.R. Output formatting is offset binary and the LVDs digital outputs are compatible with IEEE 1596.3-1996, with the exception of an adjustable common mode voltage between 0.8V and 1.2V.
The converter has a 1:2 demultiplexer that feeds two LVDs buses and reduces the output data rate on each bus to half the sampling rate.
The converter typically consumes less than 3.5 mW in the Power Down Mode and is available in a 128-lead, thermally enhanced exposed pad LQFP and operates over the Industrial (-40C d TA d +85C) temperature range.
By National Semiconductor Corporation
Part Manufacturer Description Datasheet Samples
ADC08500CIYB/NOPB Texas Instruments 8-Bit, 500-MSPS Analog-to-Digital Converter (ADC) 128-HLQFP -40 to 85
ADC08500 's PackagesADC08500 's pdf datasheet

ADC08500 Pinout, Pinouts
ADC08500 pinout,Pin out
This is one package pinout of ADC08500,If you need more pinouts please download ADC08500's pdf datasheet.

ADC08500 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

ADC08500 Pb-Free ADC08500 Cross Reference ADC08500 Schematic ADC08500 Distributor
ADC08500 Application Notes ADC08500 RoHS ADC08500 Circuits ADC08500 footprint
Hot categories