12-bit, 1.4 Mhz, 300 Mw A/d Converter With Input Multiplexer And Sample/hold - National Semiconductor

Using an innovative multistep conversion technique, the 12-bit ADC12762 CMOS Analog-to-digital converter digitizes signals at a 1.4 MHz sampling rate while consuming a maxi- mum of only 300 mW on a single +5V supply. The ADC12762 performs a 12-bit conversion in three lower-resolution Flash conversions, yielding a fast A/D with- out the cost and power dissipation associated with true Flash approaches. The Analog input voltage to the ADC12762 is tracked and held by an internal sampling circuit, allowing high frequency input signals to be accurately digitized without the need for an external sample-and-hold circuit. The ADC12762 features two sample-and-hold Flash Comparator sections which allow the converter to acquire one sample while converting the previous. This pipelining technique increases conversion speed without sacrificing performance. The multiplexer out- put is available to the user in order to perform additional ex- ternal signal processing before the signal is digitized. When the converter is not digitizing signals, it CAN be placed in the Standby mode; typical power consumption in this mode is 250 W. By National Semiconductor Corporation
ADC12762 's PackagesADC12762 's pdf datasheet

ADC12762 Pinout, Pinouts
ADC12762 pinout,Pin out
This is one package pinout of ADC12762,If you need more pinouts please download ADC12762's pdf datasheet.

ADC12762 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

ADC12762 Pb-Free ADC12762 Cross Reference ADC12762 Schematic ADC12762 Distributor
ADC12762 Application Notes ADC12762 RoHS ADC12762 Circuits ADC12762 footprint
Hot categories