Low Cost PC Hardware Monitor ASIC

The ADM1025 ADM1025A is a complete system hardware monitor for microprocessor-based systems, providing measure- ment and limit comparison of various system parameters. Five voltage measurement inputs are provided for monitoring 2.5 V, 3.3 V, 5 V, and 12 V power supplies and the processor core voltage. The ADM1025 ADM1025A CAN monitor a sixth power supply voltage by measuring its own VCC. One input (two pins) is dedicated to a remote temperature-sensing Diode and an on- chip Temperature Sensor allows ambient temperature to be monitored. The ADM1025A has open-drain VID inputs while the ADM1025 has on-chip 100 k pull-ups on the VID inputs. Measured values and in/out of limit status CAN be read out via an I2C compatible serial System Management Bus. The device CAN be controlled and configured over the same serial bus. The device also has a programmable INT output to indicate undervoltage, overvoltage, and overtemperature conditions. By ON Semiconductor
ADM1025 's PackagesADM1025 's pdf datasheet
ADM1025ARQ QSOP
ADM1025ARQ-REEL QSOP
ADM1025ARQ-REEL7 QSOP
ADM1025ARQZ QSOP
ADM1025ARQZ-REEL QSOP
ADM1025ARQZ-R7 QSOP
ADM1025AARQ QSOP
ADM1025AARQZ QSOP




ADM1025 Pinout, Pinouts
ADM1025 pinout,Pin out
This is one package pinout of ADM1025,If you need more pinouts please download ADM1025's pdf datasheet.

ADM1025 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

ADM1025 Pb-Free ADM1025 Cross Reference ADM1025 Schematic ADM1025 Distributor
ADM1025 Application Notes ADM1025 RoHS ADM1025 Circuits ADM1025 footprint
Hot categories