6 Port 10/100 Mb/s Single Chip Ethernet Switch Controller

The ADM6996F is a high performance, low cost, highly integrated (Controller, PHY and Memory) four-port 10/100 Mbps TX/FX plus two 10/100 MAC port Ethernet Switch controller with all ports supporting 10/100 Mbps Full/Half duplex. The ADM6996F is intended for applications to stand alone bridge for low cost SOHO markets such as 5Port, Router applications. The 2nd MAC CAN be configured as PCS type MII with 10/100 PHY integrated. ADM6996F provides the most advance functions such as: 802.1p(Q.O.S.), 802.1q(VLAN), Port MAC address Locking, Management, Port Status, TP Auto- MDIX, 25M Crystal & Extra MII port functions to meet customer requests on Switch demand. The ADM6996F also supports Back Pressure in Half-Duplex mode and 802.3x Flow Control Pause packet in Full-Duplex mode to prevent packet loss when Buffers are full. When Back Pressure is enabled, and there is no receive Buffer available for the incoming packet, the ADM6996F will issue a JAM pattern on the receiving port in Half Duplex mode and transmit the 802.3x Pause packet back to receiving end in Full Duplex mode. By Infineon Technologies Corporation
ADM6996F 's PackagesADM6996F 's pdf datasheet



ADM6996F Pinout, Pinouts
ADM6996F pinout,Pin out
This is one package pinout of ADM6996F,If you need more pinouts please download ADM6996F's pdf datasheet.

ADM6996F circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

ADM6996F Pb-Free ADM6996F Cross Reference ADM6996F Schematic ADM6996F Distributor
ADM6996F Application Notes ADM6996F RoHS ADM6996F Circuits ADM6996F footprint