Low-Cost ±2 g Dual-Axis Accelerometer With Duty Cycle Output

The outputs are Duty Cycle Modulated (DCM) signals whose duty cycles (ratio of pulsewidth to period) are proportional to the acceleration in each of the 2 sensitive axes. These outputs may be measured directly with a Microprocessor Counter requiring no A/D converter or glue Logic The DCM period is adjustable from 0.5 ms to 10 ms via a single resistor (RSET). If an Analog output is desired, an Analog output proportional to acceleration is available from the XFILT and YFILT pins, or may be reconstructed by filtering the duty cycle outputs. The bandwidth of the ADXL202 may be set from 0.01 Hz to 6 kHz via capacitors CX and CY. The typical noise floor is 200gHz allowing signals below 2 mg to be resolved for bandwidths below 60Hz. The ADXL202E is available in a 5 mm x 5 mm x 2 mm 8-lead hermetic LCC package. This version features improved sensitivity and zero g bias limits, lower noise, wider 3dB frequency response, and is smaller and lower priced than the original ADXL202. The original ADXL202 in hermetic 14-lead Surface Mount Cerpak is no longer recommended for new designs. Applications 2-Axis Tilt Sensing Vehicle Security PC Security Data Projector Keystone Correction Alarms and Motion Detectors Inertial Navigation
By Analog Devices, Inc.
ADXL202 's PackagesADXL202 's pdf datasheet
ADXL202AE LCC
ADXL202JE LCC
ADXL202JQC-1-REEL LCC




ADXL202 Pinout, Pinouts
ADXL202 pinout,Pin out
This is one package pinout of ADXL202,If you need more pinouts please download ADXL202's pdf datasheet.

ADXL202 Application circuits
ADXL202 circuits
This is one application circuit of ADXL202,If you need more circuits,please download ADXL202's pdf datasheet.


Related Electronics Part Number

Related Keywords:

ADXL202 Pb-Free ADXL202 Cross Reference ADXL202 Schematic ADXL202 Distributor
ADXL202 Application Notes ADXL202 RoHS ADXL202 Circuits ADXL202 footprint
Hot categories