Low Cost ±1.2g Dual Axis Accelerometer

The ADXL213 is a low cost, low power, complete dual axis Accelerometer with signal conditioned, duty cycle modulated outputs, all on a single monolithic IC. The ADXL213 measures acceleration with a full-scale range of 1.2 g (typical). The ADXL213 CAN measure both dynamic acceleration (e.g., vibration) and static acceleration (e.g., gravity).
The outputs are digital signals whose duty cycles (ratio of pulse width to period) are proportional to acceleration (30%/g). The duty cycle outputs CAN be directly measured by a Microcontroller without an A/D converter or glue Logic
Innovative design techniques are used to ensure high zero g bias stability (typically better than 0.25 mg/C), as well as tight sensitivity stability (typically better than 50 ppm/C).
The typical noise floor is 160 g/, allowing signals below 1 mg (0.06 of inclination) to be resolved in tilt sensing applications using narrow bandwidths (<60 Hz).
The user selects the bandwidth of the Accelerometer using capacitors CX and CYM at the XFILT and YFILT pins. Bandwidths of 0.5 Hz to 250 Hz may be selected to suit the application.
The ADXL213 is available in a 5mm x 5mm x 2mm, 8-pad hermetic LCC package.
Applications Automotive tilt alarm Data projectors Navigation Platform stabilization/leveling Alarms and motion detectors High accuracy, 2-axis tilt sensing
By Analog Devices, Inc.
ADXL213 's PackagesADXL213 's pdf datasheet
ADXL213AE LCC
ADXL213EB




ADXL213 Pinout, Pinouts
ADXL213 pinout,Pin out
This is one package pinout of ADXL213,If you need more pinouts please download ADXL213's pdf datasheet.

ADXL213 Application circuits
ADXL213 circuits
This is one application circuit of ADXL213,If you need more circuits,please download ADXL213's pdf datasheet.


Related Electronics Part Number

Related Keywords:

ADXL213 Pb-Free ADXL213 Cross Reference ADXL213 Schematic ADXL213 Distributor
ADXL213 Application Notes ADXL213 RoHS ADXL213 Circuits ADXL213 footprint
Hot categories