SINGLE POWER DISTRIBUTION SWITCH

The AMS2027 is a Power Distribution Switch intended for application where heavy capacitive loads and short-circuits are likely to be encountered. The high-side Switch is a 110m N-Channel MOSFET The Switch is controlled by a Logic enable input compatible with 3V and 5V Logic and is available in active-high or active-low enable. The internal Charge Pump designed to control the power Switch rise and fall time to minimize current surges during switching, also provides the Gate drive. Requiring no external components the Charge Pump allows operation from supplies as low as 3.3V. When an overload or a short circuit is encountered the AMS2027 limits the output current to a safe level by switching into a constant-current mode and the overcurrent Logic output error flag is set to a low. The power dissipation in the Switch will be increased by continuous heavy overloads and short circuits; this will cause the junction temperature to rise. The thermal protection circuit shuts the power Switch off to prevent damage. Once the device has cooled sufficiently, it will turn on Automatic An under voltage lock-out is provided to insure that the power Switch is in the Off state at start-up. By Advanced Monolithic Systems
AMS2027 's PackagesAMS2027 's pdf datasheet
AMS2027S
AMS2027P




AMS2027 Pinout, Pinouts
AMS2027 pinout,Pin out
This is one package pinout of AMS2027,If you need more pinouts please download AMS2027's pdf datasheet.

AMS2027 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

AMS2027 Pb-Free AMS2027 Cross Reference AMS2027 Schematic AMS2027 Distributor
AMS2027 Application Notes AMS2027 RoHS AMS2027 Circuits AMS2027 footprint