The AP1212 series are dual integrated high-side power Switch with independent enable and flag functions, optimized for self-powered and bus-powered Universal Serial Bus (USB) applications. The AP1212 series support the following USB requirements: each Switch channel supplies up to 500mA as required by USB downstream devices; the Switchs low on-resistance meets USB voltage drop requirements; fault current is limited to typically 1000mA, well below the UL 25VA safety requirements; and a flag output is available to indicate fault conditions to the local USB controller. Soft start eliminates the momentary voltage drop on the upstream port that may occur when the Switch is enabled in bus-powered applications. Additional features include thermal shutdown to prevent catastrophic Switch failure from high-current loads, under voltage lockout (UVLO) to ensure that the device remains off unless there is a valid input voltage present, and 3.3V and 5V Logic compatible enable inputs. By Diodes, Inc.
AP1212 's PackagesAP1212 's pdf datasheet

AP1212 Pinout, Pinouts
AP1212 pinout,Pin out
This is one package pinout of AP1212,If you need more pinouts please download AP1212's pdf datasheet.

AP1212 Application circuits
AP1212 circuits
This is one application circuit of AP1212,If you need more circuits,please download AP1212's pdf datasheet.

Related Electronics Part Number

Related Keywords:

AP1212 Pb-Free AP1212 Cross Reference AP1212 Schematic AP1212 Distributor
AP1212 Application Notes AP1212 RoHS AP1212 Circuits AP1212 footprint