MICROPOWER VFM STEP-UP DC/DC Converter

The APE2902 is a high efficiency VFM Step-up DC/DC converter for small, low input voltage or battery powered systems with ultra low quiescent supply current. The APE2902 accept a positive input voltage from start-up voltage to VOUT and convert it to a higher output voltage in the 2.5 to 5V range. The APE2902 combine ultra low quiescent supply current and high efficiency to give maximum battery life. The high switching frequency and the internally limited peak inductor current permits the use of small, low cost inductors. Only three external components are needed an inductor a Diode and an output capacitor. The APE2902 is suitable to be used in battery powered equipment where low noise, low ripple and ultra low supply current are required. Operating shutdown function is outside controlling. If EN connects to GND, the IC was been shut down and than the supply current is lower to 1uA.The APE2902 is available in very small package: SOT23-5L. By APEC
APE2902 's PackagesAPE2902 's pdf datasheet
APE2902-2.5V
APE2902-2.6V
APE2902-2.7V
APE2902-2.8V
APE2902-2.9V
APE2902-3.0V
APE2902-3.1V
APE2902-3.2V
APE2902-3.3V
APE2902-3.4V
APE2902-3.5V
APE2902-3.6V
APE2902-3.7V
APE2902-3.8V
APE2902-3.9V
APE2902-4.0V
APE2902-4.1V
APE2902-4.2V
APE2902-4.3V
APE2902-4.4V
APE2902-4.5V
APE2902-4.6V
APE2902-4.7V
APE2902-4.8V
APE2902-4.9V
APE2902-5.0V




APE2902 Pinout, Pinouts
APE2902 pinout,Pin out
This is one package pinout of APE2902,If you need more pinouts please download APE2902's pdf datasheet.

APE2902 Application circuits
APE2902 circuits
This is one application circuit of APE2902,If you need more circuits,please download APE2902's pdf datasheet.


Related Electronics Part Number

Related Keywords:

APE2902 Pb-Free APE2902 Cross Reference APE2902 Schematic APE2902 Distributor
APE2902 Application Notes APE2902 RoHS APE2902 Circuits APE2902 footprint