The DBB03A is a baseband ASIC for the \\\"Dolphin\\\" reference design. The firmware for the Dolphin reference design resides in the ROM-based program memory of the DBB03A, and thus can be readily interfaced with a TRF6903 single-chip RF Transceiver to ...
The TRF7900 is a dual integrated RF transceiver designed for human-interface devices (HID). Operating at 27 MHz, it integrates multiple components (PLL, RF mixer, simulated SAW filter, tuning circuit, and miscellaneous passive components) to provide frequency ...
The PCA9504A Glue Chip 4 is a highly integrated and cost-efficient
custom ASIC that reduces logic part count, overall component cost,
and board space requirements for PC designers and manufacturers.
The Glue Chip 4 supports the latest generation of ...
The STV9118 is a monolithic integrated circuit as-
sembled in a 32-pin shrink dual-in-line plastic
package. This IC controls all the functions related
to horizontal and vertical deflection in multimode
or multi-frequency computer display monitors. ...
The TDA1175P is a monolithic integrated circuit in
POWERDIP16 plastic package. It is intended for
use in black and white and colour TV receivers.
Low-noise makes this device particularly suitable
for use in monitors.
The functions incorporated are: ...
The TEA2037A is an horizontal and vertical de-
flection circuit. It uses the same concept as
TEA2117 but optimised for small screens, for a
very low cost solution. ...
The STLC3055N is a SLIC device specifically de-
signed for WLL (Wireless Local Loop) and ISDN-
Terminal Adaptors and VoIP applications. One of
the distinctive characteristic of this device is the
ability to operate with a single supply voltage ...
The STLC3075 is a SLIC device specifically
designed for WLL (Wireless Local Loop), and
ISDN terminal adaptors and VoIP applications.
One distinctive characteristic of this device is its
ability to operate with a single supply voltage
(from +4.5V to ...
The STLC3080 is a SLIC device suitable for a
wide range of applications: public (CO), transmis-
sion (DLC) and private (PABX). The SLIC pro-
vides the standard battery feeding with full pro-
grammability of the DC characteristic. In particular
two ...
The STLC3085 is a SLIC device specifically
designed for WLL (Wireless Local Loop), and
ISDN Terminal Adaptors and VoIP applications.
One distinctive characteristic of this device is its
ability to operate with a single supply voltage
(from +4.5V to +12V) ...
The STLC3095 is a SLIC device specifically
designed for WLL (Wireless Local Loop), and
ISDN Terminal Adaptors and VoIP applications.
One distinctive characteristic of this device is its
ability to operate with a single supply voltage
(from +4.5V to +12V) ...
ATC18M ATC18M The Atmel ATC18M is fabricated on a proprietary 0.18 m, up to six-layer-meta
CMOS process intended for use with a supply voltage of 1.8V 0.15V. Table 1 show
the range for which Atmel library cells have been characterized. ...
AT40KAL AT40KAL The AT40KAL is a family of fully PCI-compliant, SRAM-based FPGAs with distributed
14 ns programmable synchronous/asynchronous, dual port/single port SRAM, 8 global
clocks, Cache Logic ability (partially or fully reconfigurable without loss ...
The ATC20 Cell-based ASIC family features a comprehensive library of 0.21-micron standard logic and I/O cells designed to operate with a supply voltage of 1.8V +/- 0.15V and memory cells compiled to the precise requirements of the design. It is fully ...
The ATC25 Cell-based ASIC family features a comprehensive library of 0.25-micron standard logic and I/O cells designed to operate with a supply voltage of 2.5V +/- 0.25V and memory cells compiled to the precise requirements of the design. It is fully ...
The ATC35 Cell-based ASIC family features a comprehensive library of 0.35-micron standard logic and I/O cells designed to operate with a supply voltage of 3.3V +/- 0.3V and memory cells compiled to the precise requirements of the design. It is fully compatible ...
The AT76C901 is highly integrated ASIC that can be used as a part of a wireless phone
that utilizes an 802.11 LAN-based wireless medium and carries Voice over IP (VoIP)
,
packets. Specified in this datasheet, an ARM processor-based subsystem ...
S1X50000 is an embedded array product series with a high-speed/high-density SRAM/MaskROM mounted
adopting the CMOS 0.35 process. Having a high-speed/high-density SRAM/MaskROM, it will realize the
same development time as you need to develop gate arrays ...
Okis 0.22m Application-Specific Integrated Circuit (ASIC) products are available in Customer Structur
Array (CSA) architectures. The CSA-based MG75N series use a five-layer metal process on 0.22m draw
CMOS technology. The MG73N/74N CSA series uses three and ...
OKIs 0. ASIC products, specially designed for mixed 3-V/5-V applications, are now available in both
Sea Of Gates (SOG) and Customer Structured Array (CSA) architectures. Both the SOG-based MSM13R
Series and the CSA-based MSM98R Series use a three-layer-metal ...
Oki\'s second-generation 0.5m ASIC products are available in both Sea Of Gates (SOG) and Custome
Structured Array (CSA) architectures. The MSM30R Series, MSM32R Series, and MSM92R Series all offer
increased density over their first-generation counterparts, ...
Oki\'s second-generation 0.5m ASIC products are available in both Sea Of Gates (SOG) and Custome
Structured Array (CSA) architectures. The MSM30R Series, MSM32R Series, and MSM92R Series all offer
increased density over their first-generation counterparts, ...
