ECL/PECL Coaxial Cable Driver

The AZ10EL89 is a differential fanout Gate specifically designed to drive coaxial cables. The device is especially useful in Digital Video Broadcasting applications. For this application, since the system is polarity free, each output CAN be used as an independent driver. The driver has a voltage gain of approximately 40 and produces an output swing twice as large as standard ECL output. When driving a coaxial cable, proper termination is required at both ends of the line to minimize signal loss. The 1.6 V output swing allows for termination at both ends of the cable, while maintaining the required 800 mV swing at the receiving end of the cable. Because of the larger output swings, the device cannot be terminated into the standard VCC -2.0V. All of the DC parameters are tested with a 50 to VCC -3.0V load. The driver accepts a standard differential ECL input and CAN run off of the Digital Video Broadcast standard -5.0V supply. Under open input conditions (pulled to VEE) internal input clamps will force the Qn output LOW. By Arizona Microtek, Inc.
AZ10EL89 's PackagesAZ10EL89 's pdf datasheet

AZ10EL89 Pinout, Pinouts
AZ10EL89 pinout,Pin out
This is one package pinout of AZ10EL89,If you need more pinouts please download AZ10EL89's pdf datasheet.

AZ10EL89 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

AZ10EL89 Pb-Free AZ10EL89 Cross Reference AZ10EL89 Schematic AZ10EL89 Distributor
AZ10EL89 Application Notes AZ10EL89 RoHS AZ10EL89 Circuits AZ10EL89 footprint