PECL Video Cable Driver

The AZG489 is a multiple output cable driver specifically designed to drive coaxial Video cables. The device is especially useful in Digital Video Broadcasting applications. Each output has its own output stage and thus each is isolated from the other outputs. The driver has a voltage gain of approximately 40 and produces an output swing of 1.6 volts, twice as large as a standard PECL output. When driving a coaxial cable, proper termination is required at both ends of the cable to minimize reflections. The 1.6V output signal allows for termination at both ends of the cable, while providing an 800mV signal at the receiving end of the cable. The driver accepts a standard differential PECL input and CAN be powered with a 5.0V supply. Under open input conditions internal input clamps will force all outputs HIGH. Additional power supply filtering is required because of the large amount of in-phase output current. A capacitor (0.1F minimum) must bypass VCC to VEE in close proximity to the AZG489. A ferrite bead (1K @ 100 MHz) must be placed in series to the VEE pin. Additional capacitance may be required based on board layout. See Figure 1 for further information. By Arizona Microtek, Inc.
AZG489 's PackagesAZG489 's pdf datasheet

AZG489 Pinout, Pinouts
AZG489 pinout,Pin out
This is one package pinout of AZG489,If you need more pinouts please download AZG489's pdf datasheet.

AZG489 Application circuits
AZG489 circuits
This is one application circuit of AZG489,If you need more circuits,please download AZG489's pdf datasheet.

Related Electronics Part Number

Related Keywords:

AZG489 Pb-Free AZG489 Cross Reference AZG489 Schematic AZG489 Distributor
AZG489 Application Notes AZG489 RoHS AZG489 Circuits AZG489 footprint