The OPA4872 offers a very wideband 4:1 multiplexer in an SO-14 package. Using only 10.6mA, the OPA4872 provides a user-settable output Amplifier gain with greater than 500MHz large-signal bandwidth (2VPP). The switching glitch is improved over earlier ...
The OPA615 is a complete subsystem for very fast and precise DC restoration, offset clamping, and low-frequency hum suppression of wideband amplifiers or buffers. Although it is designed to stabilize the performance of video signals, the circuit can also be ...
The OPA633 is a monolithic unity-gain buffer Amplifier featuring very wide bandwidth and high slew rate. A dielectric isolation process incorporating both NPN and PNP high frequency transistors achieves performance unattainable with conventional integrated ...
The THS6002 contains two high-current, high-speed drivers and two high-speed receivers. These drivers and receivers can be configured differentially for driving and receiving signals over low-impedance lines. The THS6002 is ideally suited for asymmetrical ...
The THS6092/3 is a high-speed line driver ideal for driving signals from the remote terminal to the central office in asymmetrical digital subscriber line (ADSL) applications. It can operate from a single +12-V supply voltage while drawing only 7.3 mA of ...
The THS6092/THS6093 is a high-speed line driver ideal for driving signals from the remote terminal to the central office in asymmetrical digital subscriber line (ADSL) applications. It can operate from a single +12-V supply voltage while drawing only 7.3 mA of ...
The THS6072 is a high-speed, low-power differential receiver designed for ADSL communication systems. Its low 3.4-mA per channel quiescent current reduces power to half that of other ADSL receivers making it ideal for low power ADSL applications. This receiver ...
The THS6032 is a low-power line driver ideal for asymmetrical digital subscriber line (ADSL) applications. This device contains two high-current, high-speed current-feedback drivers, which can be configured differentially for driving ADSL signals at the ...
The THS6042/3 is a high-speed line driver ideal for driving signals from the remote terminal to the central office in asymmetrical digital subscriber line (ADSL) applications. It can operate from a 12-V supply voltage while drawing only 8.2 mA of supply ...
The THS6062 is a high-speed differential receiver designed for ADSL data communication systems. Its very low 1.6 nV/Hz voltage noise provides the high signal-to-noise ratios necessary for the long transmission lengths of ADSL systems over copper telephone ...
The THS6052/3 is a high-speed line driver ideal for driving signals from the remote terminal to the central office in asymmetrical digital subscriber line (ADSL) applications. It can operate from 12-V supply voltages while drawing only 5.2 mA of supply current ...
The THS6052/THS6053 is a high-speed line driver ideal for driving signals from the remote terminal to the central office in asymmetrical digital subscriber line (ADSL) applications. It can operate from 12-V supply voltages while drawing only 5.2 mA of supply ...
The THS6042/THS6043 is a high-speed line driver ideal for driving signals from the remote terminal to the central office in asymmetrical digital subscriber line (ADSL) applications. It can operate from a 12-V supply voltage while drawing only 8.2 mA of supply ...
The TLV270x combines sub-micropower operational Amplifier and comparator into a single package that produces excellent micropower signal conditioning with only 1.4 uA of supply current. This combination gives the designer more board space and reduces part ...
The TLV270x combines sub-micropower operational Amplifier and comparator into a single package that produces excellent micropower signal conditioning with only 1.4 uA of supply current. This combination gives the designer more board space and reduces part ...
The LOG102 is a versatile integrated circuit that computes the logarithm or log ratio of an input current relative to a reference current.
The LOG102 is tested over a wide dynamic range of input signals. In log ratio applications, a signal current can be ...
The LM119 series are precision high speed dual comparators fabricated on a single monolithic chip. They are designed to operate over a wide range of supply voltages down to a single 5V logic supply and ground. Further, they have higher gain and lower input ...
The LM9040 is a dual sensor interface circuit consisting of two independent sampled input differential amplifiers designed for use with conventional Lambda Oxygen Sensors. The Lambda Sensor is used for monitoring the oxygen concentration in the exhaust of ...
The LM9044 is a precision differential Amplifier specifically designed for operation in the automotive environment. Gain accuracy is guaranteed over the entire automotive temperature range (-40C to +125C) and is factory trimmed after package assembly. The ...
The LM1815 is an adaptive sense Amplifier and default gating circuit for motor control applications. The sense Amplifier provides a one-shot pulse output whose leading edge coincides with the negative-going zero crossing of a ground referenced input signal ...
The AD8322 comprises a digitally controlled variable attenuator of 0 dB to -42 dB, which is preceded by a low noise, fixed gain buffer and is followed by a low distortion high power Amplifier When used in a DOCSIS modem application the AD8322 works with the ...
The UTC UM601 UM601A integrated circuit incorporates
a high stability series band gap voltage reference, two
ORed operational amplifiers and a current source. ...
The UTC UM602 UM602A is a monolithic IC that includes two
op-amps, two comparators and a precision voltage reference.
This device is offering space and cost saving in many
applications like power supply management or data
acquisition systems. ...
The UTC L388 12 contains all the necessary circuitry,
amplifiers, detectors, comparators and control functions to
implement a high performance, voice-switched, hands-free
function in an answering machine.
The UTC L 388 12 is designed for ...
