The MPY634 is a wide bandwidth, high accuracy, four-quadrant analog multiplier. Its accurately laser-trimmed multiplier characteristics make it easy to use in a wide variety of applications with a minimum of external parts, often eliminating all external ...
The ADL5390 vector multiplier consists of a matched pair of
broadband variable gain amplifiers whose outputs are summed.
The separate gain controls for each amplifier are linear-in-
magnitude. If the two input RF signals are in quadrature, the
vector ...
The ADL5391 draws on three decades of experience in advanced analog multiplier products. It provides the same general mathematical function that has been field proven to provide an exceptional degree of versatility in function synthesis: VW = (VX x ...
The AD8170(2:1) and AD8174(4:1) are very high speed buffered multiplexers. These multiplexers offer an internal current feedback output amplifier whose gain can be programmed via external resistors and is capable of delivering 50 mA of output current. They ...
The ADG1208 and ADG1209 are monolithic, iCMOS analog multiplexers comprising eight single channels and four differential channels, respectively. The ADG1208 switches one of eight inputs to a common output as determined by the 3-bit binary address lines A0, A1, ...
The AD8170(2:1) and AD8174(4:1) are very high speed buffered multiplexers. These multiplexers offer an internal current feedback output amplifier whose gain can be programmed via external resistors and is capable of delivering 50 mA of output current. They ...
The ADG1204 is a complementary metal-oxide semiconductor (CMOS) analog multiplexer, comprising four single channels designed on an iCMOS (industrial CMOS) process. iCMOS is a modular manufacturing process that combines high voltage CMOS and bipolar ...
The AD8184 offers a high speed disable feature allowing the
output to be put into a high impedance state. This allows multiple
outputs to be connected together for cascading stages while
the \"OFF\" channels do not load the output bus. It operates ...
The ADG804 is a low voltage 4-channel CMOS multiplexer comprising four single channels. This device offers ultralow on resistance of less than 0.8 over the full temperature range. The digital inputs can handle 1.8 V logic with a 2.7 V to 3.6 V supply.
The ADG904 and ADG904-R are wideband analog 4:1 multiplexers that use a CMOS process to provide high isolation and low insertion loss to 1 GHz. The ADG904 is an absorptive/matched mux with 50 terminated shunt legs; the ADG904-R is a reflective mux. These ...
The ADG604 is a CMOS analog multiplexer, comprising of four single channels. It operates from a dual supply of 2.7 V to 5.5 V, or from a single supply of +2.7 V to +5.5 V. The ADG604 switches one of four inputs to a common output, D, as determined by the 3-bit ...
GENERAL DESCRIPTION
The ADG704 is a CMOS analog multiplexer, comprising four
single channels. This multiplexer is designed on an advanced
submicron process that provides low power dissipation yet gives
high switching speed, low on resistance, low leakage ...
Each channel ADG729 is controlled by one bit of the data byte. This means that these multiplexers can be used in a number of different configurations, all, any or none of the channels may be on at any one time. On power up of the device, all switches will ...
The ADG739 is a CMOS analog matrix switch with a serially-controlled 3-wire interface. The ADG739 is a dual 4-channel matrix switch. On resistance is closely matched between switches and very flat over the full signal range.
The ADG739 utilize a 3-wire ...
The ADG1408 and ADG1409 are monolithic CMOS analog multiplexers comprising eight single channels and four differential channels, respectively. The ADG1408 switches one of eight inputs to a common output as determined by the 3-bit binary address lines A0, A1, ...
The ADG409 is a monolithic CMOS analog multiplexer comprising four differential channels. The ADG409 switches one of four differential inputs to a common differential output as determined by the 2-bit binary address lines A0 and A1. An EN input on the device ...
The ADG439F switches one of four differential inputs to a common differential output as determined by the 2-bit binary address lines A0 and A1. An EN input on each device is used to enable or disable the device. When disabled, all channels are switched OFF.
The ADG508A and ADG509A are CMOS monolithic analog multiplexers with eight channels and dual four channels, respectively. The ADG508A switches one of eight inputs to a common output, depending on the state of three binary addresses and an enable input. The ...
The ADG509F is a CMOS analog multiplexer comprising 4 differential channels. This multiplexer provides fault protection. Using a series n-channel, p-channel, n-channel MOSFET structure, both device and signal source protection is provided in the event of an ...
The ADG529A is designed on an enhanced LC2MOS process which gives an increased signal capability of VSS to VDD and enables operation over a wide range of supply voltages. The devices can comfortably operate anywhere in the 10.8 V to 16.5 V signal or dual ...
The ADG609 is a monolithic CMOS analog multiplexer comprising four differential channels. The ADG609 switches one of four differential inputs to a common differential output as determined by the 2-bit binary address lines A0 and A1. An EN input on both devices ...
The ADG658 and ADG659 are low voltage, CMOS analog multiplexers comprising eight single channels and four differential channels respectively. The ADG659 switches one of four differential inputs to a common differential output as determined by the 2-bit binary ...
The ADG709 is a low voltage, CMOS analog multiplexer comprising four differential channels. The ADG709 switches one of four differential inputs to a common differential output as determined by the 2-bit binary address lines A0 and A1. An EN input is used to ...
The ADG759 is a low voltage, CMOS analog multiplexer comprising four differential channels. The ADG759 switches one of four differential inputs to a common differential output as determined by the 2-bit binary address lines A0 and A1. An EN input is used to ...
The ADG1206 and ADG1207 are monolithic iCMOS analog
multiplexers comprising sixteen single channels and eight
differential channels, respectively. The ADG1206 switches one
of sixteen inputs to a common output as determined by the 4-
bit binary address ...
The ADG1208 and ADG1209 are monolithic, iCMOS analog multiplexers comprising eight single channels and four differential channels, respectively. The ADG1208 switches one of eight inputs to a common output as determined by the 3-bit binary address lines A0, A1, ...
The ADG1408 and ADG1409 are monolithic CMOS analog multiplexers comprising eight single channels and four differential channels, respectively. The ADG1408 switches one of eight inputs to a common output as determined by the 3-bit binary address lines A0, A1, ...
The MUX-08 is a monolithic eight-channel analog multiplexer which connects a single output to one of the eight analog inputs depending upon the state of a 3-bit binary address. The MUX-24 is a monolithic four-channel differential analog multiplexer ...
The ADG408 is a monolithic CMOS analog multiplexer comprising 8 single channels. The ADG408 switches one of eight inputs to a common output as determined by the 3-bit binary address lines A0, A1 and A2. An EN input is used to enable or disable the device. When ...
The ADG428 is a monolithic CMOS analog multiplexer comprising eight single channels. On-chip address and control latches facilitate microprocessor interfacing. The ADG428 switches one of eight inputs to a common output as determined by the 3-bit binary address ...
The ADG438F switches one of eight inputs to a common output as determined by the 3-bit binary address lines A0, A1 and A2. An EN input on each device is used to enable or disable the device. When disabled, all channels are switched OFF. ...
The ADG508A and ADG509A are CMOS monolithic analog multiplexers with eight channels and dual four channels, respectively. The ADG508A switches one of eight inputs to a common output, depending on the state of three binary addresses and an enable input. The ...
The ADG508F is a CMOS analog multiplexer comprising 8 single channels. This multiplexer provides fault protection. Using a series n-channel, p-channel, n-channel MOSFET structure, both device and signal source protection is provided in the event of an ...
The ADG528A and ADG529A are CMOS monolithic analog multiplexers with 8 channels and dual 4 channels respectively. On-chip latches facilitate microprocessor interfacing. The ADG528A switches one of 8 inputs to a common output depending on the state of three ...
The ADG508F, ADG509F and ADG528F are CMOS analog multiplexers, the ADG508F and ADG528F comprising 8 single channels and the ADG509F comprising four differential channels. These multiplexers provide fault protection. Using a series n-channel, p-channel, ...
The ADG608 is a monolithic CMOS analog multiplexer comprising 8 single channels. The ADG608 switches one of eight inputs to a common output as determined by the 3-bit binary address lines A0, A1 and A2. An EN input on both devices is used to enable or disable ...
The ADG658 and ADG659 are low voltage, CMOS analog multiplexers comprising eight single channels and four differential channels respectively. The ADG658 switches one of eight inputs (S1-S8) to a common output, D, as determined by the
3-bit binary address ...
The ADG708 is a low voltage, CMOS analog multiplexers comprising eight single channels. The ADG708 switches one of eight inputs (S1-S8) to a common output, D, as determined by the 3-bit binary address lines A0, A1, and A2. An EN input is used to enable or ...
The ADG758 is a low voltage, CMOS analog multiplexer comprising eight single channels. The ADG758 switches one of eight inputs (S1-S8) to a common output, D, as determined by the 3-bit binary address lines A0, A1, and A2. An EN input is used to enable or ...
Each channel ADG728 is controlled by one bit of the data byte. This means that these multiplexers can be used in a number of different configurations, all, any or none of the channels may be on at any one time. On power up of the device, all switches will ...
The ADG738 is a CMOS analog matrix switch/Multiplexer with a serially-controlled 3-wire interface. The ADG738 is an 8-channel matrix switch. On resistance is closely matched between switches and very flat over the full signal range.
On power-up, the ...
The ADG507A is a CMOS monolithic analog multiplexer with dual 8 channels. The ADG507A switches one of eight differential inputs to a common differential output, depending on the state of three binary addresses and an enable input. It has TTL and 5 V CMOS logic ...
The ADG407 is monolithic CMOS analog multiplexer. The ADG407 switches one of eight differential inputs to a common differential output as determined by the 3-bit binary address lines A0, A1 and A2. An EN input on all devices is used to enable or disable the ...
The ADG527A is an 8-channel differential analog multiplexer with on-chip latches to facilitate microprocessor interfacing. It is a latchable version of the ADG507A. The ADG527A switches one of 8 differential inputs to a common differential output depending on ...
The ADG707 is a low-voltage, CMOS analog multiplexer comprising eight differential channels. The ADG707 switches one of eight differential inputs to a common differential output as determined by the 3-bit binary address lines A0, A1, and A2. An EN input is ...
The ADG1206 and ADG1207 are monolithic iCMOS analog
multiplexers comprising sixteen single channels and eight
differential channels, respectively. The ADG1206 switches one
of sixteen inputs to a common output as determined by the 4-
bit binary address ...
The ADG506A is a CMOS monolithic analog multiplexer with 16 channels. The ADG506A switches one of 16 inputs to a common output, depending on the state of four binary addresses and an enable input. It has TTL and 5 V CMOS logic compatible digital inputs.
The ADG406 is designed on an enhanced LC2MOS process that provides low power dissipation yet gives high switching speed and low on resistance. These features make the parts suitable for high speed data acquisition systems and audio signal switching. Low power ...
The ADG426 is a monolithic CMOS analog multiplexer. The ADG426 switches one of sixteen inputs to a common output as determined by the 4-bit binary address lines A0, A1, A2 and A3. The ADG426 has on-chip address and control latches that facilitate ...
The ADG526A is a 16-channel analog multiplexer with on-chip latches to facilitate microprocessor interfacing. It is a latchable version of the ADG506A. The ADG526A switches one of 16 inputs to a common output depending on the state of four binary addresses and ...
The ADG706 and ADG707 are low-voltage, CMOS analog
multiplexers comprising 16 single channels and eight differential
channels, respectively. The ADG706 switches one of 16 inputs
(S1S16) to acommon output, D, as determined by the 4-bit
binary address lines ...
The MUX-16 is a monolithic 16-channel analog multiplexoer which connects a single output to 1 of the 16 analog inputs depending upon the state of a 4-bit binary address. Disconnection of the output is provided by a logical \"0\" at the ENABLE input, thereby ...
The ADG731/ADG725 are monolithic, CMOS, 32-channel/
dual 16-channel analog multiplexers with a serially controlled
3-wire interface. The ADG731 switches one of 32 inputs
(S1S32) to a commonoutput, D. The ADG725 can be config-
ured as a dual mux switching ...
The ADG726/ADG732 are monolithic CMOS 32-channel/dual
16-channel analog multiplexers. The ADG732 switches one of
32 inputs (S1-S32) to a common output, D, as determined by
the 5-bit binary address lines A0, A1, A2, A3, and A4. The
ADG726 switches one of 16 ...
The ADG725/ADG731 are monolithic CMOS 32 channel/dual 16 channel analog multiplexers with a serially controlled 3-wire interface. The ADG732 switches one of thirty-two inputs (S1-S32) to a common output, D. The ADG725 can be configured as a dual mux switching ...
The ADG726/ADG732 are monolithic CMOS 32-channel/dual
16-channel analog multiplexers. The ADG732 switches one of
32 inputs (S1-S32) to a common output, D, as determined by
the 5-bit binary address lines A0, A1, A2, A3, and A4. The
ADG726 switches one of 16 ...
The AD532 is the first pretrimmed single chip monolithic multi-
plier/divider. It guarantees a maximum multiplying error of
?1.0% and a ?10 V output voltage without the need for any
external trimming resistors or output op amp. Because the
AD532 is ...
The AD534 is a monolithic laser trimmed four-quadrant multiplier divider having accuracy specifications previously found only in expensive hybrid or modular products. A maximum multiplication error of 0.25% is guaranteed for the AD534L without any external ...
The AD538\'s overall transfer function is Vo=Vy(Vz/Vx)m. Programming a particular function is via pin strapping. No external components are required for one-quadrant (positive input) multiplication and division. Two-quadrant (bipolar numerator) division is ...
The AD539 is a low-distortion analog multiplier having two identical signal channels (Y1 and Y2), with a common X-input providing linear control of gain. Excellent ac characteristics up to video frequencies and a 3dB bandwidth of over 60MHz are provided. ...
Excellent supply rejection, low temperature coefficients and
long term stability of the on-chip thin film resistors and buried
zener reference preserve accuracy even under adverse conditions.
The simplicity and flexibility of use provide an ...
The AD633 is a functionally complete, four-quadrant, analog multiplier. It includes high impedance, differential X and Y inputs and a high impedance summing input (Z). The low impedance output voltage is a nominal 10 V full scale provided by a buried Zener. ...
The AD734 is an accurate high speed, four-quadrant analog multiplier that is pin-compatible with the industry-standard AD534 and provides the transfer function W = XY/U. The AD734 provides a low-impedance voltage output with a full-power (20 V pk-pk) bandwidth ...
The AD834 is a monolithic laser-trimmed four-quadrant analog multiplier intended for use in high frequency applications, having a transconductance bandwidth (RL=50 Ohm) in excess of 500 MHz from either of the differential voltage inputs. In multiplier modes, ...
The AD835 is a complete four-quadrant voltage output analog multiplier fabricated on an advanced dielectrically isolated complementary bipolar process. It generates the linear product of its X and Y voltage inputs, with a -3 dB output bandwidth of 250 MHz (a ...
The MLT04 is a complete, four-channel, voltage output analog multiplier packaged in an 18-pin DIP or SOIC-18. These complete multipliers are ideal for general purpose applications such as voltage controlled amplifiers, variable active filters, \"zipper\" ...
The HA-2556 is a monolithic, high speed, four quadrant, analog multiplier constructed in the Intersil Dielectrically Isolated High Frequency Process. The voltage output simplifies many designs by eliminating the current-to-voltage conversion stage required for ...
The MAX2045/MAX2046/MAX2047 low-cost, fully integrated vector multipliers alter the magnitude and phase of an RF signal. Each device is optimized for the UMTS (MAX2045), DCS/PCS (MAX2046), or cellular/GSM (MAX2047) frequency bands. These devices feature ...
The MAX2045/MAX2046/MAX2047 low-cost, fully integrated vector multipliers alter the magnitude and phase of an RF signal. Each device is optimized for the UMTS (MAX2045), DCS/PCS (MAX2046), or cellular/GSM (MAX2047) frequency bands. These devices feature ...
The MAX2045/MAX2046/MAX2047 low-cost, fully integrated vector multipliers alter the magnitude and phase of an RF signal. Each device is optimized for the UMTS (MAX2045), DCS/PCS (MAX2046), or cellular/GSM (MAX2047) frequency bands. These devices feature ...
The TC7MZ4051FK,TC7MZ4052FK,TC7MZ4053FK are high-speed, low-voltage
drive analog multiplexer/demultiplexers using silicon gate CMOS
technology. In 3 V and 5 V systems these can achieve high-speed
operation with the low power dissipation that is a ...
The LMU18 is a high-speed, low
power 16-bit parallel multiplier.
The LMU18 is an 84-pin device
which provides simultaneous access
to all outputs.
The LMU18 produces the 32-bit
product of two 16-bit numbers.
Data present at the A inputs, along
with the ...
