The OPA860 is a versatile monolithic component designed for wide-bandwidth systems, including high performance video, RF and IF circuitry. It includes a wideband, bipolar operational transconductance amplifier (OTA), and voltage Buffer amplifier.
The OTA or ...
The OPA832 is a low-power, high-speed, fixed-gain amplifier designed to operate on a single +3.3V or +5V supply. Operation on 5V or +10V supplies is also supported. The input range extends below ground and to within 1V of the positive supply. Using ...
The BUFxx704 are a series of multi-channel buffers targeted towards gamma correction in high-resolution LCD panels. They are pin-compatible with the existing BUFxx702 and BUFxx703 family and operate at higher supply voltages up to 18 V (19 V absolute max). The ...
The BUFxx703 are a series of multi-channel buffers targeted towards gamma correction in high-resolution LCD panels. The number of gamma correction channels required depends on a variety of factors and differs greatly from design to design. Therefore, various ...
The BUFxx702 are a series of multi-channel buffers targeted towards gamma correction in high-resolution LCD panels. The number of gamma correction channels required depends on a variety of factors and differs greatly from design to design. Therefore, various ...
The BUFxx704 are a series of multi-channel buffers targeted towards gamma correction in high-resolution LCD panels. They are pin-compatible with the existing BUFxx702 and BUFxx703 family and operate at higher supply voltages up to 18 V (19 V absolute max). The ...
The BUFxx703 are a series of multi-channel buffers targeted towards gamma correction in high-resolution LCD panels. The number of gamma correction channels required depends on a variety of factors and differs greatly from design to design. Therefore, various ...
The BUFxx704 are a series of multi-channel buffers targeted towards gamma correction in high-resolution LCD panels. They are pin-compatible with the existing BUFxx702 and BUFxx703 family and operate at higher supply voltages up to 18 V (19 V absolute max). The ...
The BUFxx703 are a series of multi-channel buffers targeted towards gamma correction in high-resolution LCD panels. The number of gamma correction channels required depends on a variety of factors and differs greatly from design to design. Therefore, various ...
The BUF04701 is a 4-channel, low power, high-voltage rail-to- rail input/output Buffer Operating on supplies ranging from 3.5V to 12V (1.75V to 6V), the BUF04701 has a 3dB bandwidth of 8MHz with a slew rate of 10V/??s, and requires only 1.1mA quiescent ...
The BUF01900 and BUF01901 provide a programmable voltage output with 10-bit resolution. Programming of the output occurs through an industry-standard, two-wire serial interface. Once the correct VCOM voltage is established it can easily be stored into the ...
The BUF01900 and BUF01901 provide a programmable voltage output with 10-bit resolution. Programming of the output occurs through an industry-standard, two-wire serial interface. Once the correct VCOM voltage is established it can easily be stored into the ...
The BUFxx702 are a series of multi-channel buffers targeted towards gamma correction in high-resolution LCD panels. The number of gamma correction channels required depends on a variety of factors and differs greatly from design to design. Therefore, various ...
The BUFxx704 are a series of multi-channel buffers targeted towards gamma correction in high-resolution LCD panels. They are pin-compatible with the existing BUFxx702 and BUFxx703 family and operate at higher supply voltages up to 18 V (19 V absolute max). The ...
The LMH6321 is a high speed unity gain Buffer that slews at 1800 V/s and has a small signal bandwidth of 110 MHz while driving
a 50& load. It can drive 300 mA continuously and will not oscillate while driving large capacitive loads. The LMH6321 features ...
The LMH6718 is a dual, low cost high speed (130MHz) Buffer which features user selectable gains of +2, +1, and -1V/V. The LMH6718 also has a new output stage that delivers high output drive current (200mA), but consumes minimal quiescent supply current ...
The LMH6739 is a very wideband, DC coupled monolithic selectable gain Buffer designed specifically for ultra high resolution video systems as well as wide dynamic range systems requiring exceptional signal fidelity. Benefiting from National\'s current feedback ...
The LMH?6704 is a very wideband, DC coupled selectable gain Buffer designed specifically for wide dynamic range systems requiring exceptional signal fidelity. The LMH6704 includes on chip feedback and gain set resistors, simplifying PCB layout while providing ...
The LMH6559 is a high-speed, closed-loop Buffer designed for applications requiring the processing of very high frequency signals. While offering a small signal bandwidth of 1750MHz, and an ultra high slew rate of 4580V/?s the LMH6559 consumes only 10mA of ...
The LMH?6560 is a high speed, closed-loop Buffer designed for applications requiring the processing of very high frequency signals. While offering a small signal bandwidth of 680MHz, and a very high slew rate of 3100V/?s the LMH6560 consumes only 46mA of ...
The LMH6734 is a high speed monolithic selectable gain Buffer designed specifically for ultra high resolution video systems
as well as wide dynamic range systems requiring exceptional signal fidelity. Benefiting from National\'s current feedback ...
The AD8568, AD8569, and AD8570 are low-cost single-supply
Buffer amplifiers with rail-to-rail input and output capability.
They are optimized for LCD monitor applications and built on
an advanced high-voltage CBCMOS process. The AD8568 includes
two ...
The AD8568, AD8569, and AD8570 are low-cost single-supply
Buffer amplifiers with rail-to-rail input and output capability.
They are optimized for LCD monitor applications and built on
an advanced high-voltage CBCMOS process. The AD8568 includes
two ...
The AD8568, AD8569, and AD8570 are low-cost single-supply
Buffer amplifiers with rail-to-rail input and output capability.
They are optimized for LCD monitor applications and built on
an advanced high-voltage CBCMOS process. The AD8568 includes
two ...
The AD8079 is a dual, low power, high speed Buffer designed to operate on 5 V supplies. The AD8079\'s pinout offers excellent input and output isolation compared to the traditional dual amplifier pin configuration. With two ac ground pins separating both the ...
The EL5623 integrates six channels of gamma buffers into a single device. The top three gamma channels in each device are designed to swing to the upper supply rail, with the other three designed to swing to the lower rail. The output capability of each ...
The EL5128 integrates two VCOM amplifiers with a single gamma reference Buffer Operating on supplies ranging from 5V to 15V, while consuming only 2.0mA, the EL5128 has a bandwidth of 12MHz (-3dB) and provides common mode input ability beyond the supply ...
The EL5524, EL5624, EL5724, and EL5824 integrate a number of gamma reference buffers with a single VCOM amplifier. The EL5524 contains 4 gamma buffers, the EL5624 contains 6, the EL5724 contains 8, and the EL5824 contains 10. Each gamma Buffer has a bandwidth ...
The EL5524, EL5624, EL5724, and EL5824 integrate a number of gamma reference buffers with a single VCOM amplifier. The EL5524 contains 4 gamma buffers, the EL5624 contains 6, the EL5724 contains 8, and the EL5824 contains 10. Each gamma Buffer has a bandwidth ...
The EL5524, EL5624, EL5724, and EL5824 integrate a number of gamma reference buffers with a single VCOM amplifier. The EL5524 contains 4 gamma buffers, the EL5624 contains 6, the EL5724 contains 8, and the EL5824 contains 10. Each gamma Buffer has a bandwidth ...
The EL5524, EL5624, EL5724, and EL5824 integrate a number of gamma reference buffers with a single VCOM amplifier. The EL5524 contains 4 gamma buffers, the EL5624 contains 6, the EL5724 contains 8, and the EL5824 contains 10. Each gamma Buffer has a bandwidth ...
The EL5027 is a dual, low power, high voltage rail-to-rail input-output Buffer Operating on supplies ranging from 5V to 15V, while consuming only 110A per channel, the EL5027 has a bandwidth of 2.5MHz -(-3dB). The EL5027 also provides rail-to-rail input and ...
The EL5127, EL5227, EL5327, and EL5427 are low power, high voltage rail-to-rail input/output buffers designed for use in reference voltage buffering applications in small LCD displays. They are available in quad (EL5127), octal (EL5227), 10-Channel (EL5327), ...
The EL5127, EL5227, EL5327, and EL5427 are low power, high voltage rail-to-rail input/output buffers designed for use in reference voltage buffering applications in small LCD displays. They are available in quad (EL5127), octal (EL5227), 10-Channel (EL5327), ...
The EL5127, EL5227, EL5327, and EL5427 are low power, high voltage rail-to-rail input/output buffers designed for use in reference voltage buffering applications in small LCD displays. They are available in quad (EL5127), octal (EL5227), 10-Channel (EL5327), ...
The EL5127, EL5227, EL5327, and EL5427 are low power, high voltage rail-to-rail input/output buffers designed for use in reference voltage buffering applications in small LCD displays. They are available in quad (EL5127), octal (EL5227), 10-Channel (EL5327), ...
The EL5224, EL5324, and EL5424 feature 8, 10, and 12 low power buffers, respectively, and one high power output amplifier. They are designed primarily for buffering column driver reference voltages in TFT-LCD applications as well as generation of the VCOM ...
The EL5224, EL5324, and EL5424 feature 8, 10, and 12 low power buffers, respectively, and one high power output amplifier. They are designed primarily for buffering column driver reference voltages in TFT-LCD applications as well as generation of the VCOM ...
The EL5224, EL5324, and EL5424 feature 8, 10, and 12 low power buffers, respectively, and one high power output amplifier. They are designed primarily for buffering column driver reference voltages in TFT-LCD applications as well as generation of the VCOM ...
The MAX4200, MAX4201, MAX4202, MAX4203, MAX4204, MAX4205 are ultra-high-speed, open-loop
buffers featuring high slew rate, high output current,
low noise, and excellent capacitive-load-driving
capability. The MAX4200/MAX4201/MAX4202 are single
buffers, ...
The MAX4200, MAX4201, MAX4202, MAX4203, MAX4204, MAX4205 are ultra-high-speed, open-loop
buffers featuring high slew rate, high output current,
low noise, and excellent capacitive-load-driving
capability. The MAX4200/MAX4201/MAX4202 are single
buffers, ...
The MAX4200, MAX4201, MAX4202, MAX4203, MAX4204, MAX4205 are ultra-high-speed, open-loop
buffers featuring high slew rate, high output current,
low noise, and excellent capacitive-load-driving
capability. The MAX4200/MAX4201/MAX4202 are single
buffers, ...
The MAX4200, MAX4201, MAX4202, MAX4203, MAX4204, MAX4205 are ultra-high-speed, open-loop
buffers featuring high slew rate, high output current,
low noise, and excellent capacitive-load-driving
capability. The MAX4200/MAX4201/MAX4202 are single
buffers, ...
The MAX4200, MAX4201, MAX4202, MAX4203, MAX4204, MAX4205 are ultra-high-speed, open-loop
buffers featuring high slew rate, high output current,
low noise, and excellent capacitive-load-driving
capability. The MAX4200/MAX4201/MAX4202 are single
buffers, ...
The MAX4200, MAX4201, MAX4202, MAX4203, MAX4204, MAX4205 are ultra-high-speed, open-loop
buffers featuring high slew rate, high output current,
low noise, and excellent capacitive-load-driving
capability. The MAX4200/MAX4201/MAX4202 are single
buffers, ...
The LT6650 is a micropower, low voltage 400mV refer-
ence. Operating with supplies from 1.4V up to 18V, the
device draws only 5.6A typical, making it ideal for low
voltage systems as well as handheld instruments and
industrial control systems. With only ...
The MAX2470/MAX2471 are flexible, low-cost, high-
reverse-isolation Buffer amplifiers for applications with
discrete and module-based VCO designs. Both feature
differential 50 outputs for driving a single differential
(balanced) load or two separate ...
The MAX2472/MAX2473 are flexible, wideband, high-
reverse-isolation Buffer amplifiers. The MAX2472 has dual
open-collector outputs capable of delivering -5dBm into
50 while maintaining harmonic suppression below
-25dBc. The MAX2473 has a single ...
The LH0033 is a high speed, FET input, voltage
follower Buffer designed to provide high current drive (up to
100mA) at frequencies from DC to over 100MHz. The
LH0033 slews at 1500V/s and exhibits excellent phase
linearity up to 20MHz.
LH0033 is intended ...