The \'ABTH32316 consist of three 16-bit registered input/output (I/O) ports. These registers combine D-type latches and flip-flops to allow data flow in transparent, latch, and clock modes. Data from one input port can be exchanged to one or more of the other ...
The \'ABTH32318 consist of three 18-bit registered input/output (I/O) ports. These registers combine D-type latches and flip-flops to allow data flow in transparent, latch, and clock modes. Data from one input port can be exchanged to one or more of the other ...
This 12-bit to 24-bit registered bus exchanger is designed for 1.65-V to 3.6-V VCC operation. The SN74ALVCH162268 is used for applications in which data must be transferred from a narrow high-speed bus to a wide, lower-frequency bus. The device ...
This 12-bit to 24-bit registered bus exchanger is designed for 1.65-V to 3.6-V VCC operation. The SN74ALVCH16269 is used in applications in which two separate ports must be multiplexed onto, or demultiplexed from, a single port. The device is particularly ...
This 12-bit to 24-bit registered bus exchanger is designed for 1.65-V to 3.6-V VCC operation. The SN74ALVCH16270 is used in applications in which data must be transferred from a narrow high-speed bus to a wide lower-frequency bus. The device provides ...
This 12-bit to 24-bit bus exchanger is designed for 1.65-V to 3.6-V VCC operation. The SN74ALVCH16271 is intended for applications in which two separate data paths must be multiplexed onto, or demultiplexed from, a single data path. This device is ...
The SN74ALVCH16282 is an 18-bit to 36-bit registered bus exchanger designed for 1.65-V to 3.6-V VCC operation. This device is intended for use in applications in which data must be transferred from a narrow high-speed bus to a wide lower-frequency bus. It ...
This 9-bit, 4-port universal bus exchanger is designed for 1.65-V to 3.6-V VCC operation. The SN74ALVCH16409 allows synchronous data exchange between four different buses. Data flow is controlled by the select (SEL0-SEL4) inputs. A data-flow state is ...
The SN74ALVCHG162280 is a 16-bit to 32-bit registered bus exchanger. This device is intended for use in applications where data must be transferred from a narrow high-speed bus to a wide lower-frequency bus. It is designed specifically for low-voltage (3.3-V) ...
The SN74ALVCHG162282 is an 18-bit to 36-bit registered bus exchanger. This device is intended for use in applications where data must be transferred from a narrow high-speed bus to a wide lower-frequency bus. It is designed specifically for low-voltage (3.3-V) ...
This 12-bit to 24-bit registered bus exchanger is designed for 1.65-V to 3.6-V VCC operation. The SN74ALVCHR16269A is used in applications in which two ports must be multiplexed onto, or demultiplexed from, a single port. It is particularly suitable as an ...
This 9-bit, 4-port universal bus exchanger is designed for 1.65-V to 3.6-V VCC operation. The SN74ALVCHR16409 allows synchronous data exchange between four different buses. Data flow is controlled by the select (SEL0-SEL4) inputs. A data-flow state is stored ...
A Dynamic Output Control (DOC) circuit is implemented, which, during the transition, initially lowers the output impedance to effectively drive the load and, subsequently, raises the impedance to reduce noise. Figure 1 shows typical VOL vs IOL and VOH vs IOH ...
MC68/LC/EC040 bus, or other 16- to 32-bit processors, to communicate
bi-directionally with 32-, 16-, or 8-bit peripherals and memories. It
dynamically recognizes the size of the selected peripheral/memory and
then writes or reads the appropriate data to or ...
The HD74ALVCH16270 is used in applications where data must be transferred from a narrow high
speed bus to a wide lower frequency bus. The device provides synchronous data exchange between the
two ports. Data is stored in the internal registers on the low ...
