CBTV4010 10-bit DDR SDRAM Mux/bus Switch

This 10-bit bus Switch is designed for 2.3 V to 2.7 V VCC operation and SSTL_2 select input levels. Each Host port pin is multiplexed to one of four DIMM port pins. When the S pin is low the corresponding 10-bit bus Switch is turned on. The on-state connects the Host port to the DIMM port through a 20 Ohm nominal series resistance. When the S pin is high the Switch is open and a high-impedance state exists between the two ports. The DIMM port is terminated with a 100 Ohm resistor to ground when the S pin is high. The design is intended to have only one DIMM port active at any time. The part incorporates a very low cross-talk design. It has a very low skew between outputs (< 50 ps) and low skew (< 50 ps) for rising and falling edges. The part has optional performance in DDR data bus applications. Each Switch has been optimized for connection to 1 or 2-bank DIMMs. The low internal RC time constant of the Switch (20 Ohm x 7 pF) allows data transfer to be made with minimal propagation delay. The CBTV4010 is characterized for operation from 0 to +85 Cel.
By NXP Semiconductors
CBTV4010 's PackagesCBTV4010 's pdf datasheet

CBTV4010 Pinout will be updated soon..., now you can download the pdf datasheet to check the pinouts !
CBTV4010 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

CBTV4010 Pb-Free CBTV4010 Cross Reference CBTV4010 Schematic CBTV4010 Distributor
CBTV4010 Application Notes CBTV4010 RoHS CBTV4010 Circuits CBTV4010 footprint
Hot categories