Rad-Hard CMOS Hex Buffer/Converter

The CD4050BMS is an non-inverting hex Buffer and features Logic level conversion using only one supply voltage (VCC). The input signal high level (VIH) CAN exceed the VCC supply voltage when this device is used for Logic level conversions. This device is intended for use as CMOS to DTL/TTL converters and CAN drive directly two DTL/TTL loads. (VCC = 5V, VOL 0.4V, and IOL 3.3mA.
The CD4050BMS is designated as replacement for CD4010B. Because the CD4050BMS requires only one power supply, it is preferred over the CD4010B and should be used in place of the CD4010B in all inverter, current driver, or Logic level conversion applications. In these applications the CD4050BMS is pin compatible with the CD4010B and CAN be substituted for this device in existing as well as in new designs. Terminal No. 16 is not connected internally on the CD4050BMS therefore, connection to this terminal is of no consequence to circuit operation. For applications not requiring high sink current or voltage conversion, the CD4069UB Hex Inverter is recommended.
The CD4050BMS is supplied in these 16 lead outline packages:
Braze Seal DIP H4T
Frit Seal DIP H1E
Ceramic Flatpack H3X
By Intersil Corporation
CD4050BMS 's PackagesCD4050BMS 's pdf datasheet
CD4050BDMSR DIP
CD4050BKMSR




CD4050BMS Pinout, Pinouts
CD4050BMS pinout,Pin out
This is one package pinout of CD4050BMS,If you need more pinouts please download CD4050BMS's pdf datasheet.

CD4050BMS circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

CD4050BMS Pb-Free CD4050BMS Cross Reference CD4050BMS Schematic CD4050BMS Distributor
CD4050BMS Application Notes CD4050BMS RoHS CD4050BMS Circuits CD4050BMS footprint
Hot categories