BiCMOS FCT Interface Logic, Octal D-Type Flip-Flops, Three-State

The CD74FCT564 and CD74FCT574 are octal D-Type, three-state, positive edge triggered ip-ops which use a small geometry BiCMOS technology. The output stage is a combination of bipolar and CMOS Transistors that limits the output HIGH level to two Diode drops below VCC. This result- ant lowering of output swing (0V to 3.7V) reduces power bus ringing (a source of EMI) and minimizes VCC bounce and ground bounce and their effects during simultaneous output switching. The output conguration also enhances switching speed and is capable of sinking 48 milliamperes. The eight ip-ops enter data into their Registers on the LOW to HIGH transition of the Clock (CP). The Output Enable (OE) controls the three state outputs and is independent of the Register operation. When the Output Enable (OE) is HIGH, the outputs are in the high impedance state. The CD74FCT564 and CD74FCT574 share the same congura- tions; the CD74FCT564 however, has inverted outputs and the CD74FCT574 has noninverted outputs. By Texas Instruments
CD74FCT564 's PackagesCD74FCT564 's pdf datasheet

CD74FCT564 Pinout, Pinouts
CD74FCT564 pinout,Pin out
This is one package pinout of CD74FCT564,If you need more pinouts please download CD74FCT564's pdf datasheet.

CD74FCT564 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

CD74FCT564 Pb-Free CD74FCT564 Cross Reference CD74FCT564 Schematic CD74FCT564 Distributor
CD74FCT564 Application Notes CD74FCT564 RoHS CD74FCT564 Circuits CD74FCT564 footprint
Hot categories