Phase-Lock Loop Clock Drivers

The CDC857-2 and CDC857-3 are high-performance, low-skew, low-jitter, phase-lock loop (PLL) Clock Driver They use a PLL to precisely align, in both frequency and phase, the feedback (FBOUT) output to the Clock (CLK) input signal. The CDC857-3 operates at 3.3 V (PLL) and 2.5 V (output buffer). The CDC857-2 operates at 2.5 V (PLL and output buffer).
One bank of ten inverting and noninverting outputs provide ten low-skew, low-jitter copies of CLK. Output signal duty cycles are adjusted to 50%, independent of the duty cycle at CLK.
All outputs CAN be enabled or disabled via a single output enable input. When the G input is high, the outputs Switch in phase and frequency with CLK; when the G input is low, the outputs are disabled to high impedance state (3-state).
Unlike many products containing PLLs the CDC857 does not require external RC networks. The loop Filter for the PLL is included on-chip, minimizing component count, board space, and cost.
Because it is based on PLL circuity, the CDC857 requires a stabilization time to achieve phase lock of the feedback signal to the reference signal. This stabilization time is required following power up and application of a fixed-frequency, fixed-phase signal at CLK, as well as following any changes to the PLL reference or feedback signals. The PLL CAN be bypassed for test purposes by strapping AVCC to ground. If AVCC is at GND and VCC = ON, 2 falling edges on G cause the PLL to run with FBOUT being enabled and all other outputs being disabled, after AVCC ramps up to its specified VCC value, with G being kept low. The CDC857 is characterized for operation from 0C to 85C.
By Texas Instruments
Part Manufacturer Description Datasheet Samples
CDC857-3DGG Texas Instruments IC PLL BASED CLOCK DRIVER, 10 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PDSO48, PLASTIC, TSSOP-48, Clock Driver
CDC857-3DGGG4 Texas Instruments PLL BASED CLOCK DRIVER, 10 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PDSO48, PLASTIC, TSSOP-48
CDC857-2 's PackagesCDC857-2 's pdf datasheet
CDC857-2DGG TSSOP
CDC857-2DGGG4 TSSOP
CDC857-2DGGR TSSOP
CDC857-2DGGRG4 TSSOP




CDC857-2 Pinout, Pinouts
CDC857-2 pinout,Pin out
This is one package pinout of CDC857-2,If you need more pinouts please download CDC857-2's pdf datasheet.

CDC857-2 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

CDC857-2 Pb-Free CDC857-2 Cross Reference CDC857-2 Schematic CDC857-2 Distributor
CDC857-2 Application Notes CDC857-2 RoHS CDC857-2 Circuits CDC857-2 footprint