5.0 V / 100 MA & Tracker / 200 MA Dual LDO W/ Reset And Enable

The CS8361 is a precision micro-power dual voltage Regulator with ENABLEbar and RESETbar. The 5V standby output is accurate within +/-2% while supplying loads of 100mA and has a typical dropout voltage of 400mV. Quiescent current is low, typically 140?A with a 300?A load. The active RESETbar output monitors the 5V standby output and holds the RESETbar line low during power-up and Regulator dropout conditions. The RESETbar circuit includes hysteresis and is guaranteed to operate correctly with 1V on the standby output. The second output tracks the 5V standby output through an external adjust lead, and CAN supply loads of 250mA with a typical dropout voltage of 400mV. The Logic level ENABLEbar lead is used to control this tracking Regulator output. Both outputs are protected against overvoltage, short circuit, reverse battery and overtemperature conditions. The robustness and low quiescent current of the CS8361 makes it not only well suited for automotive Microprocessor applications, but for any battery powered Microprocessor applications.
By ON Semiconductor
CS8361 's PackagesCS8361 's pdf datasheet
CS8361YDPS7G D2PAK
CS8361YDPSR7G D2PAK
CS8361YDWF16G SO
CS8361YDWFR16G SO
CS8361YDPS7 D2PAK
CS8361YDPSR7 D2PAK
CS8361YDWF16 SO
CS8361YDWFR16 SO




CS8361 Pinout, Pinouts
CS8361 pinout,Pin out
This is one package pinout of CS8361,If you need more pinouts please download CS8361's pdf datasheet.

CS8361 Application circuits
CS8361 circuits
This is one application circuit of CS8361,If you need more circuits,please download CS8361's pdf datasheet.


Related Electronics Part Number

Related Keywords:

CS8361 Pb-Free CS8361 Cross Reference CS8361 Schematic CS8361 Distributor
CS8361 Application Notes CS8361 RoHS CS8361 Circuits CS8361 footprint