CDC421 is a high-performance, low-phase-noise clock generator. It has an integrated low-noise, LC-based voltage-controlled oscillator (VCO) that operates within the 1.75 GHz-2.35 GHz frequency range. It has an integrated crystal oscillator that operates in ...
CDC421 is a high-performance, low-phase-noise clock generator. It has an integrated low-noise, LC-based voltage-controlled oscillator (VCO) that operates within the 1.75 GHz-2.35 GHz frequency range. It has an integrated crystal oscillator that operates in ...
CDC421 is a high-performance, low-phase-noise clock generator. It has an integrated low-noise, LC-based voltage-controlled oscillator (VCO) that operates within the 1.75 GHz-2.35 GHz frequency range. It has an integrated crystal oscillator that operates in ...
CDC421 is a high-performance, low-phase-noise clock generator. It has an integrated low-noise, LC-based voltage-controlled oscillator (VCO) that operates within the 1.75 GHz-2.35 GHz frequency range. It has an integrated crystal oscillator that operates in ...
CDC421 is a high-performance, low-phase-noise clock generator. It has an integrated low-noise, LC-based voltage-controlled oscillator (VCO) that operates within the 1.75 GHz-2.35 GHz frequency range. It has an integrated crystal oscillator that operates in ...
CDC421 is a high-performance, low-phase-noise clock generator. It has an integrated low-noise, LC-based voltage-controlled oscillator (VCO) that operates within the 1.75 GHz-2.35 GHz frequency range. It has an integrated crystal oscillator that operates in ...
CDC421 is a high-performance, low-phase-noise clock generator. It has an integrated low-noise, LC-based voltage-controlled oscillator (VCO) that operates within the 1.75 GHz-2.35 GHz frequency range. It has an integrated crystal oscillator that operates in ...
The CDCE421 is a high-performance, low-phase-noise clock generator. It has two fully integrated, low-noise, LC-based voltage controlled oscillators (VCOs) that operate in the 1.750-GHz-2.350-GHz frequency range. It has an integrated crystal oscillator that ...
The CDCD5704 clock generator provides the necessary clock signals to support an XDR memory subsystem and Redwood logic interface using a reference clock input with or without spread-spectrum modulation. Contained in a 28-pin TSSOP package that includes four ...
The Direct Rambus clock generator (DRCG) provides the necessary clock signals to support a Direct Rambus memory subsystem. It includes signals to synchronize the Direct Rambus channel clock to an external system or processor clock. It is designed to support ...
The Direct Rambus clock generator - lite (DRCG-Lite) is an independent crystal clock generator. It performs clock multiplication using PLL, sourced by an internal crystal oscillator. It provides one differential, high-speed Rambus channel compatible output ...
The Direct Rambus clock generator (DRCG) provides the necessary clock signals to support a Direct Rambus memory subsystem. It includes signals to synchronize the Direct Rambus channel clock to an external system or processor clock. It is designed to support ...
The CDCR83A has a fail-safe power up initialization state-machine which supports proper operation under all power up conditions.
The CDCR83A is characterized for operation over free-air temperatures of 40C to 85C. ...
The ADF4001 frequency synthesizer can be used to implement clock sources for
PLLs that require very low noise, stable reference signals. It consists of a
low-noise digital PFD (Phase Frequency Detector), a precision charge pump, a
programmable reference ...
The AD9516-0 provides a multi-output clock distribution function with subpicosecond jitter performance, along with an on-chip PLL and VCO. The on-chip VCO tunes from 2.55 GHz to 2.95 GHz. Optionally, an external VCO/VCXO of up to 2.4 GHz may be used.
The AD9516-1* provides a multi-output clock distribution function with subpicosecond jitter performance, along with an on-chip PLL and VCO. The on-chip VCO tunes from 2.30 GHz to 2.65 GHz. Optionally, an external VCO/VCXO of up to 2.4 GHz may be used. The ...
The AD9516-2 emphasizes low jitter and phase noise to maximize data converter performance, and it can benefit other applications with demanding phase noise and jitter requirements.
The AD9516-2 features six LVPECL outputs (in three pairs); four LVDS ...
The AD9516-3 provides a multi-output clock distribution function with subpicosecond jitter performance, along with an on-chip PLL and VCO. The on-chip VCO tunes from 1.75 GHz to 2.25 GHz. Optionally, an external VCO/VCXO of up to 2.4 GHz may be used. The ...
The AD9516-4* provides a multi-output clock distribution function with subpicosecond jitter performance, along with an on-chip PLL and VCO. The on-chip VCO tunes from 1.45 GHz to 1.80 GHz. Optionally, an external VCO/VCXO of up to 2.4 GHz may be used. The ...
The AD9517-0 provides a multi-output clock distribution function with subpicosecond jitter performance, along with an on-chip PLL and VCO. The on-chip VCO tunes from 2.55 GHz to 2.95 GHz. Optionally, an external VCO/VCXO of up to 2.4 GHz may be used.
The AD9517-1* provides a multi-output clock distribution function with subpicosecond jitter performance, along with an on-chip PLL and VCO. The on-chip VCO tunes from 2.30 GHz to 2.65 GHz. Optionally, an external VCO/VCXO of up to 2.4 GHz may be used. The ...
The AD9517-2 provides a multi-output clock distribution function with subpicosecond jitter performance, along with an on-chip PLL and VCO. The on-chip VCO tunes from 2.05 GHz to 2.33 GHz. Optionally, an external VCO/VCXO of up to 2.4 GHz can be used. The ...
The AD9517-3 provides a multi-output clock distribution function with subpicosecond jitter performance, along with an on-chip PLL and VCO. The on-chip VCO tunes from 1.75 GHz to 2.25 GHz. Optionally, an external VCO/VCXO of up to 2.4 GHz may be used. The ...
The AD9517-4 provides a multi-output clock distribution function with subpicosecond jitter performance, along with an on-chip PLL and VCO. The on-chip VCO tunes from 1.45 GHz to 1.80 GHz. Optionally, an external VCO/VCXO of up to 2.4 GHz may be used. The ...
The AD9518-0 provides a multi-output clock distribution function with subpicosecond jitter performance, along with an on-chip PLL and VCO. The on-chip VCO tunes from 2.55 GHz to 2.95 GHz. Optionally, an external VCO/VCXO of up to 2.4 GHz may be used.
The AD9518-1 provides a multi-output clock distribution function with subpicosecond jitter performance, along with an onchip PLL and VCO. The on-chip VCO tunes from 2.30 GHz to 2.65 GHz. Optionally, an external VCO/VCXO of up to 2.4 GHz may be used. The ...
The AD9518-2 provides a multi-output clock distribution function with subpicosecond jitter performance, along with an on-chip PLL and VCO. The on-chip VCO tunes from 2.05 GHz to 2.33 GHz. Optionally, an external VCO/VCXO of up to 2.4 GHz may be used. The ...
The AD9518-3 provides a multi-output clock distribution function with subpicosecond jitter performance, along with an on-chip PLL and VCO. The on-chip VCO tunes from 1.75 GHz to 2.25 GHz. Optionally, an external VCO/VCXO of up to 2.4 GHz may be used. The ...
The AD9518-4 provides a multi-output clock distribution function with subpicosecond jitter performance, along with an onchip PLL and VCO. The on-chip VCO tunes from 1.45 GHz to 1.80 GHz. Optionally, an external VCO/VCXO of up to 2.4 GHz may be used. The ...
The AD9540 supports a variety of functions including signal synthesis and low jitter clock generation useful in a wide variety of applications. The device features high performance PLL circuitry including a flexible 200 MHz Phase Frequency Detector and a ...
The AD9549 provides synchronization for many systems, including synchronous optical networks (SONET/SDH). The AD9549 generates an output clock, synchronized to one of two external input references. The external references may contain significant time jitter, ...
The ADCLK905 (one input, one output), ADCLK907 (dual one input, one output), and ADCLK925 (one input, two outputs) are ultrafast clock/data buffers fabricated on the Analog Devices, Inc., proprietary XFCB3 silicon germanium (SiGe) bipolar process. The ...
The ADCLK905 (one input, one output), ADCLK907 (dual one input, one output), and ADCLK925 (one input, two outputs) are ultrafast clock/data buffers fabricated on the Analog Devices, Inc., proprietary XFCB3 silicon germanium (SiGe) bipolar process. The ...
The ADCLK905 (one input, one output), ADCLK907 (dual one input, one output), and ADCLK925 (one input, two outputs) are ultrafast clock/data buffers fabricated on the Analog Devices, Inc., proprietary XFCB3 silicon germanium (SiGe) bipolar process. The ...
The ISL14010 series of devices are general purpose integrated Clock Synthesizers and Generators suited for consumer applications such as Set-top Box, and various other consumer applications. The selectable reference input accepts 30MHz signal either from ...
The ISL14011 series of devices are general purpose integrated Clock Synthesizers and Generators suited for consumer applications such as Set-top Box, and various other consumer applications. The selectable reference input accepts 30MHz signal either from ...
The ISL14010 series of devices are general purpose integrated Clock Synthesizers and Generators suited for consumer applications such as Set-top Box, and various other consumer applications. The selectable reference input accepts 30MHz signal either from ...
The HD-4702 Bit Rate Generator provides the necessary clock
signals for digital data transmission systems, such as a UART. It
generates 13 commonly used bit rates using an on-chip crystal
oscillator or an external input. For conventional operation ...
The internal oscillator uses the external quartz crystal as the basis
of its frequency reference. The output of the reference oscillator is
divided by 16 before being sent to the phase detector.
The VCO output is scaled by a divider that is configured by ...
The PCK2014A is a clock generator (frequency synthesizer) chip for
a Pentium III and other similar processors.
The PCK2014A has six CPU clock outputs at 2.5 V, two 3V66 clocks
running at 66 MHz. there are six PCI clock outputs running at
33 MHz. ...
The PCK2020 is a clock synthesizer/driver for a Pentium III and other similar processors.The PCK2020 has four differential pair CPU current source outputs, two Mref clock outputs running at 1/2 the CPU clock frequency depending on the state of SEL133/100 pin ...
The PCK2021 is a clock synthesizer/driver for a Pentium IIITM and other similar processors.The PCK2021 has six differential pair CPU current source outputs, two 33 MHz outputs, one 3V66 output, and two 48 MHz clocks which can be disabled on power-up, and one ...
The PCK2023 is a clock synthesizer/driver for a Pentium IV and
other similar processors.
The PCK2023 has three differential pair CPU current source
outputs. There are ten PCI clock outputs running at 33 MHz and two
48 MHz clocks. There are six 3V66 ...
The LTC6900 is a precision, low power oscillator that is easy to use and occupies very little PC board space. The oscillator frequency is programmed by a single external resistor (RSET). The LTC6900 has been designed for high accuracy operation (=1.5% ...
The MAX9492 frequency synthesizer is designed to generate multiple clocks for clock distribution in network routers or switches. The device provides a total of six buffered clock outputs (CLK1 to CLK6). CLK1 is the buffered output of the reference clock. CLK2 ...
The MAX3610 is a low-jitter, high-performance, dual-rate
clock generator optimized for 1Gbps/2Gbps/4Gbps
Fibre-Channel applications. When connected with an
external AT-cut crystal, the device generates a precision
clock output by integrating a crystal ...
The MAX3831/MAX3832 are 4:1 multiplexers (muxes) and 1:4 demultiplexers (demuxes) with automatic channel alignment. Operating from a single +3.3V supply, the mux receives four parallel, 622Mbps SDH/SONET channels. These channels are bit interleaved to generate ...
The MAX3831/MAX3832 are 4:1 multiplexers (muxes) and 1:4 demultiplexers (demuxes) with automatic channel alignment. Operating from a single +3.3V supply, the mux receives four parallel, 622Mbps SDH/SONET channels. These channels are bit interleaved to generate ...
The MAX3670 is a low-jitter 155MHz/622MHz reference
clock generator IC designed for system clock distribution
and frequency synchronization in OC-48 and OC-192
SONET/SDH and WDM transmission systems. The
MAX3670 integrates a phase/frequency detector, ...
The MAX3672 is a low-jitter 155MHz/622MHz reference clock generator IC designed for system clock distribution and frequency synchronization in OC-48 and OC-192 SONET/SDH and WDM transmission systems. The MAX3672 integrates a phase/frequency detector, an ...
The MAX9485 programmable multiple-output clock generator provides a cost-efficient solution for MPEG-2 audio systems such as DVD players, DVD drives for multimedia PCs, digital HDTV systems, home entertainment centers, and set-top boxes. The MAX9485 ...
The DS1077 is a dual-output, programmable, fixed-frequency oscillator requiring no external
components for operation. The DS1077 can be used as a processor-controlled frequency synthesizer or
as a standalone oscillator. The two synchronous output operating ...
The DS1086 EconOscillator is a programmable clock generator that produces a spread-spectrum (dithered) square-wave output of frequencies from 260kHz to 133MHz. The selectable dithered output reduces radiated-emission peaks by dithering the frequency 2% or 4% ...
The DS1087L is a clock generator that produces a spread-spectrum (dithered) square-wave output of frequencies from 130kHz to 66.6MHz. The DS1087L is shipped from the factory programmed at a specific frequency and spread-spectrum percentage. The user still has ...
The DS1086L EconOscillator is a 3.3V programmable clock generator that produces a spread-spectrum (dithered) square-wave output of frequencies from 130kHz to 66.6MHz. The selectable dithered output reduces radiated-emission peaks by dithering the frequency ...
The MAX7375 is a silicon oscillator, intended as a low-cost improvement replacing ceramic resonators, crystals, and crystal oscillator modules used as the clock source for microcontrollers and UARTs in 3V, 3.3V, and 5V applications. The MAX7375 is a fully ...
The DS1040 Programmable One-Shot Pulse Generator has five precise pulse widths ranging from 50ns to 500ns. Increments range from 2.5ns to 100ns with a nominal width accuracy of 5% or 2ns, whichever is greater. In response to the rising edge of the input ...
The SY100S839V is a low skew ,/4, ,/5/6 clock
generation chip designed explicitly for low skew clock
generation applications. The internal dividers are
synchronous to each other, therefore, the common output
edges are all precisely aligned. The device ...
The SY89306V and SY89316V are a high-speed buffer/receivers. The devices are functionally equivalent to the 10/100EP16 buffers, but feature a 70% smaller footprint. ...
The XR-2206 is a monolithic function generator
integrated circuit capable of producing high quality sine,
square, triangle, ramp, and pulse waveforms of
high-stability and accuracy. The output waveforms can be
both amplitude and frequency modulated by an ...
The XRT8001 WAN Clock is a dual-phase-locked loop
chip that generates two very low jitter output clock
signals that can be used for synchronization clocks in
wide area networking systems. The XRT8001 has pre-
programmed multipliers and dividers that are ...
The SH3001 can operate completely stand-alone, or
under control of the microcontroller. A single-wire
interface handles bi-directional communications. The
SH3001 stores all configuration, calibration, parameters,
and status information in a 36-byte ...
The SH3002 can operate completely stand-alone, or
under control of the microcontroller. A single-wire
interface handles both bi-directional communications and
the interrupt / wake-up signal from the SH3002. The
SH3002 stores all configuration, ...
Three components make a complete system: any
microcontroller, the SH3003, and a bypass capacitor. This
low-cost system would consume very little power and have
clock-frequency accuracy of 0.5%. A fourth component,
a 32.768kHz crystal, raises the ...
CY2077 is an EPROM-programmable, high-accuracy,
general-purpose, PLL-based design for use in applications such
as modems, disk drives, CD-ROM drives, video CD players,
DVD players, games, set-top boxes, and data/telecommunica-
tions.
CY2077 can generate ...
The CY25200 is a Spread Spectrum Clock Generator (SSCG) IC
used to reduce Electro Magnetic Interference (EMI) found in
todays high speed digital electronic systems
The device uses a Cypress proprietary Phase-Locked Loop
(PLL) and Spread Spectrum Clock ...
The CY24272 is a slave receiver supporting operations in the
word and byte modes described in sections 5.5.4 and 5.5.5 of
the SMBus Specification 2.0. ...
The CY2545 and CY2547 are designed to operate at internal
core supply voltage of 1.8V. In the case of the high voltage part
(CY2545), an internal regulator is used to generate 1.8V from the
2.5V/3.0V/3.3V V supply voltage at pin 22. For the low voltage ...
The CY25811/CY25812/CY25814 products are Spread Spectrum Clock
Generator (SSCG) ICs used for the purpose of reducing electro-
magnetic interference (EMI) found in todays high speed digita
electronic systems.
The devices use a Cypress proprietary ...
The CY2308 is a 3.3V Zero Delay Buffer designed to distribute
high speed clocks in PC, workstation, datacom, telecom, and
other high performance applications.
The part has an on-chip PLL that locks to an input clock
presented on the REF pin. The PLL ...
The CY24271 is a slave receiver supporting operations in the
word and byte modes described in sections 5.5.4 and 5.5.5 of
the SMBus Specification 2.0. ...
The CY2907 is a general-purpose Clock Generator designed
for use in a wide variety of applicationsrom graphics to PC
peripherals to disk drives. It generates selectable system clock
frequencies from a single reference input (crystal or reference
clock). ...
The CY22800 is a multi-function clock generator that supports
various applications in consumer and communications
markets. The device uses the Cypress proprietary PLL along
with Spread Spectrum and VCXO technology to make it one of
the most versatile clock ...
The CY22801 is a flash-programmable clock generator that
supports various applications in consumer and communica-
tions markets. The device uses a Cypress proprietary PLL to
drive up to three configurable outputs in an 8-pin SOIC.
The CY22801 can be ...
The CY22180 is a low jitter clock generator for use in
networking, telecommunication, datacom, consumer
electronics, and other general purpose applications. The
CY22180 offers a single programmable output and an optional
copy of the input frequency. The ...
The CY22393, CY22394, and CY22395 are a family of parts
designed as upgrades to the existing CY22392 device. These
parts have similar performance to the CY22392, but provide
advanced features to meet the needs of more demanding
applications.
The clock ...
The CY2544 and CY2546 are four-PLL programmable Spread
Spectrum Clock Generators used to reduce EMI found in
high-speed digital electronic systems. Two of the four PLLs
have Spread Spectrum capability. The spread spectrum
feature is turned on or off using ...
The CY25403, CY25483 and CY25423 have three program-
mable PLLs that can be used to generate output frequencies
ranging from 3 to 166 MHz. The advantage of having three PLLs
is that a single device generates up to three independent
frequencies from a ...
The CY25402 and CY25422 are two PLL programmable
Spread Spectrum Clock Generators used to reduce EMI found
in high-speed digital electronic systems. Both PLLs have
Spread Spectrum capability. The spread spectrum feature are
turned on or off using the ...
The CY22388 family of devices CY22388/CY22389/CY22391 has an Analog VCXO (Voltage
Controlled Crystal Oscillator), 4 PLLs, up to 8 clock outputs
and frequency selection capabilities. The frequency selects do
not modify any PLL frequency. Instead they ...
The CY24488 generates up to three independent clock
frequencies, plus a buffered copy of the reference crystal
frequency, from a single crystal or reference input. Five clock
output pins are available, which allows some frequencies to be
driven on two or ...
The CY2071A is a general-purpose clock synthesizer
designed for use in applications such as modems, disk drives,
CD-ROM drives, video CD players, games, set-top boxes, and
data/telecommunications. The device offers up to three config-
urable clock outputs ...
The Cypress W134M/W134S provides the differential clock
signals for a Direct Rambus memory subsystem. It includes
signals to synchronize the Direct Rambus Channel clock to an
external system clock but can also be used in systems that do
not require ...
The CY24xZXC family of devices has an Analog VCXO
(Voltage Controlled Crystal Oscillator), 4 PLLs, up to 7 clock
outputs, and frequency selection capabilities. The frequency
selects do not modify any PLL frequency. Instead, they allow
the user to choose ...
The CY27EE16ZE integrates a 16-kbit EEPROM scratchpad
and a clock generator that features Cypresss programmabl
2
clock core. An industry standard I C serial programming
interface (SPI) is used to program the scratchpad and clock
core. ...
The Cypress CY25560 is a Spread Spectrum Clock Generator
(SSCG) IC used for the purpose of reducing EMI found in
todays high-speed digtal electronic systems.
The CY25560 uses a Cypress proprietary phase-locked loop
(PLL) and Spread Spectrum Clock (SSC) ...