The CDCVF25084 is a high-performance, low-skew, low-jitter, phase-lock loop clock multiplier. It uses a PLL to precisely align, in both frequency and phase, the output clocks to the input clock signal including a multiplication factor of four. The CDCVF25084 ...
The CDC857-2 and CDC857-3 are high-performance, low-skew, low-jitter, phase-lock loop (PLL) clock driver. They use a PLL to precisely align, in both frequency and phase, the feedback (FBOUT) output to the clock (CLK) input signal. The CDC857-3 operates at 3.3 ...
The CDC857-2 and CDC857-3 are high-performance, low-skew, low-jitter, phase-lock loop (PLL) clock driver. They use a PLL to precisely align, in both frequency and phase, the feedback (FBOUT) output to the clock (CLK) input signal. The CDC857-3 operates at 3.3 ...
This 28-bit 1:2 configurable registered buffer is designed for 1.425-V to 1.575-V VCC operation. One device per DIMM is required to drive up to 36 SDRAM loads (maximum 2 Ranks 4). The SN74SSTE32882 includes a high-performance, low-jitter, low-skew PLL ...
The Intersil HS-82C85RH is a high performance, radiation hardened CMOS Clock Controller/Generator designed to support systems utilizing radiation hardened static CMOS microprocessors such as the HS-80C86RH. The HS-82C85RH contains a crystal controlled ...
The PCA2002 is a CMOS integrated circuit for battery operated wrist watches with a
32 kHz quartz crystal as the timing element and a bipolar stepping motor. The crystal
oscillator and the frequency divider are optimized for minimum current consumption.
A ...
The PCF8583 is a clock/calendar circuit based on a 2048-bit static CMOS RAM organized as 256 words by 8 bits. Addresses and data are transferred serially via the two-line bidirectional I2C-bus. The built-in word address register is incremented automatically ...
The PCF8593 is a CMOS clock/calendar circuit, optimized
for low power consumption. Addresses and data are
transferred serially via the two-line bidirectional I2C-bus.
The built-in word address register is incremented
automatically after each written or ...
The MAX9382/MAX9383 are high-speed PECL/ECL phase-frequency detectors designed for use in high-bandwidth phase-locked loop (PLL) applications. The devices compare a single-ended reference (R) and a VCO (V) input and produce pulse streams on differential up (U) ...
The DS1318 parallel-interface elapsed time counter (ETC) is a 44-bit counter that maintains the amount of time that the device operates from main and/or backup power or during an external event. The internal frequency of the counter clock is 4.096kHz, which ...
The MXD1005 silicon delay line offers five equally spaced taps with delays ranging from 12ns to 250ns and a nominal accuracy of 2ns or 3%, whichever is greater. Relative to hybrid solutions, this device offers enhanced performance and higher reliability, and ...
The MXD1013 contains three independent, monolithic, logic-buffered delay lines with delays ranging from 10ns to 200ns. Nominal accuracy is 2ns for a 10ns to 60ns delay, 3% for a 70ns to 100ns delay, and 5% for a 150ns to 200ns delay. Relative to hybrid ...
The DS1004 5-Tap High-Speed Silicon Delay Line reproduces an input logic state at the output after a minimum input-to-tap delay of 5ns at Tap 1, with Taps 2 to 5 precisely delayed by 2, 3, 4, or 5ns. Nominal delay tolerances are characterized at standard ...
The DS1005 5-Tap Silicon Delay Line reproduces an input logic state at the output after a fixed delay at five equally spaced taps, ranging from 12ns to 250ns. (See table.) Delay accuracy is characterized at 3% or 2ns (whichever is greater). Leading and ...
The DS1007 7-in-1 Silicon Delay Line reproduces an input logic state at the output after delays at 7 taps. Delays from range from 3ns to 40ns (see table), with a tolerance of 2ns at room temperature. By enabling precise timing adjustments, Dallas Silicon ...
The DS1010 10-in-1 Silicon Delay Line reproduces an input logic state at the output after delays provided by 10 equally spaced taps. Delays range from 5ns to 500ns (see table), with a tolerance of 2ns or 5% (whichever is greater) at room temperature. By ...
The DS1013 3-in-1 Silicon Delay Lines provide three independent delay elements that reproduce logic inputs after delays ranging from 10ns to 200ns at each output. Both leading- and trailing-edge accuracy are specified. Delay tolerances are 2ns for delays of ...
The DS1021 is an 8-bit programmable delay line that reproduces an input logic state at the output after a user-programmed delay. It is similar to the DS1020 but with the economy of reduced specifications. Available in two versions, total delays are varied over ...
The DS1021 is an 8-bit programmable delay line that reproduces an input logic state at the output after a user-programmed delay. It is similar to the DS1020 but with the economy of reduced specifications. Available in two versions, total delays are varied over ...
Specifically designed for use in low-power systems, the DS1033 has three independent, buffered delays that reproduce logic inputs after delays ranging from 8ns to 30ns at each output. Characterized for operating over the 2.7V to 3.6V range, nominal tolerance ...
The DS1035 3-in-1 High-Speed Silicon Delay Line has three independent, buffered taps that reproduce logic inputs after delays ranging from 6ns to 30ns at each output. Nominal tolerance is 1.5ns with additional tolerance of 2.0ns over temperature and voltage ...
The DS1044 4-in-1 High-Speed Silicon Delay Line has four independent, buffered delays that reproduce logic inputs after delays ranging from 5ns to 25ns at each output. Nominal tolerance is 1.5ns with additional tolerance of 1.0ns over temperature and voltage ...
The DS1100 series delay lines have five equally spaced taps providing delays from 4ns to 500ns. These devices are offered in 8-pin DIPs and surface-mount packages to save PC board area. Low cost and superior reliability over hybrid technology is achieved by ...
The system energy manager is a highly integrated microcontroller that provides several key features for systems including key scanning and control, battery and power management, as well as two 2-Wire serial I/O Ports. It incorporates the Dallas 8051-compatible ...
The DS1110L 10-tap delay line is a 3V version of the DS1110. It has 10 equally spaced taps providing delays from 10ns to 500ns. The DS1110L series delay lines provide a nominal accuracy of 5% or 2ns, whichever is greater, at 3.3V and +25C. The DS1110L is ...
The DS1110 delay line is an improved replacement for the DS1010. It has ten equally spaced taps providing delays from 5ns to 500ns. The devices are offered in a standard 16-pin SO, or 14-pin TSSOP. The DS1110 series delay lines provide a nominal accuracy of 5% ...
The SY58025U features two ultra-fast, low jitter 2:1
differential muxes with a guaranteed maximum data or clock
throughput of 10.7Gbps or 7GHz, respectively. ...
The SY58026U features two ultra-fast, low jitter 2:1
differential muxes with a guaranteed maximum data
throughput of 5Gbps.
The SY58026U differential inputs include a unique
internal termination design that allows access to the
termination network ...
The SY58027U features two ultra-fast, low jitter 2:1
differential muxes with a guaranteed maximum data
throughput of 10.7Gbps.
The SY58027U differential inputs include a unique
internal termination design that allows access to the
termination network ...
The SY58028U is a 2.5V/3.3V precision, high-speed, 4:1
differential CML multiplexer capable of handling clocks up
to 7GHz and data streams up to 10.7Gbps. In addition, a
1:2 fanout buffer provides two copies of the selected inputs. ...
The SY58029U is a 2.5V/3.3V precision, high-speed, 4:1
differential multiplexer with 100k LVPECL (800mV)
compatible outputs, capable of handling clocks up to 4GHz
and data streams up to 5Gbps. In addition, a 1:2 fanout
buffer provides two copies of the ...
The SY58030U is a 2.5V/3.3V precision, high-speed, 4:1
differential multiplexer with 400mV LVPECL outputs, capable
of handling clocks up to 7GHz and data streams up to
10.7Gbps. In addition, a 1:2 fanout buffer provides two copies
of the selected input. ...
The SY58031U is a 2.5V/3.3V precision, high-speed, fully
differential CML 1:8 fanout buffer. The SY58031U is
optimized to provide eight identical output copies with less
than 20ps of skew and less than 10ps total jitter. It can
PP
process clock signals ...
The SY58032U is a 2.5V/3.3V precision, high-speed, fully
differential LVPECL 1:8 fanout buffer. The SY58032U is
optimized to provide eight identical output copies with less
than 20ps of skew and less than 10ps total jitter. It can
pp
process clock ...
The SY58033U is a 2.5V/3.3V precision, high-speed, fully
differential 400mV LVPECL 1:8 fanout buffer. The SY58033U
is optimized to provide eight identical output copies with less
than 20ps of skew and less than 10ps total jitter. It can
pp
process clock ...
The SY58034U is a 2.5V/3.3V precision, high-speed 1:6
fanout buffer capable of handling clocks up to 6GHz. A
differential 2:1 MUX input is included for redundant clock
switchover applications. ...
The SY58035U is a 2.5V/3.3V precision, high-speed, 1:6
fanout capable of handling clocks up to 4.5GHz. A differential
2:1 MUX input is included for redundant clock switchover
applications. ...
The SY58036U is a 2.5V/3.3V precision, high-speed, 1:6
fanout buffer capable of handling clocks up to 6GHz. A
differential 2:1 MUX input is included for redundant clock
switchover applications. ...
The MC14600 Alarm IC is designed to simplify the process of interfacing an
alarm level voltage condition to a piezoelectric horn and/or LED. With an extremely
low average current requirement and an integrated low battery detect feature, the
part is ideally ...
ATXP6 is a full feature of over clocking device for Intel
CPU. It integrates all functions that are possible to be
utilized for over-clocking purpose. ...
The SY10 - an accurate time and frequency source
that had been designed as a subsystem level module.
The module is designed to work within ATM, SONET,
SDH, and wireless systems where synchronization is
vital. The SY10 is an excellent synchronization ...