The HC55150 is a family of Ultra Low Power SLICs. The feature set and common pinouts of the UniSLIC14 family positions it as a universal solution for: Plain Old Telephone Service (POTS), PBX, Central Office, Loop Carrier, Fiber in the Loop, ISDN-TA and NT1+, ...
The nLiten BBT3821 is a fully integrated octal 2.488Gbps to 3.1875Gbps Clock and Data Recovery (CDR) circuit and Retimer ideal for high bandwidth serial electrical or optical communications systems. It extracts timing information and data from serial inputs at ...
The ISL35822 is a fully integrated octal 2.488Gbps to 3.1875Gbps Clock and Data Recovery (CDR) circuit and Retimer ideal for high bandwidth serial electrical or optical communications systems. It extracts timing information and data from serial inputs at ...
The HC5503PRC is a low cost SLIC optimized for large Telecom switches. It combines a flexible voltage feed architecture with the Intersil latch-free DI bonded wafer process, to provide a low component count, carrier class solution at very low cost. The ...
The UniSLIC14 is a family of Ultra Low Power SLICs. The feature set and common pinouts of the UniSLIC14 family positions it as a universal solution for: Plain Old Telephone Service (POTS), PBX, Central Office, Loop Carrier, Fiber in the Loop, ISDN-TA and NT1+, ...
The UniSLIC14 is a family of Ultra Low Power SLICs. The feature set and common pinouts of the UniSLIC14 family positions it as a universal solution for: Plain Old Telephone Service (POTS), PBX, Central Office, Loop Carrier, Fiber in the Loop, ISDN-TA and NT1+, ...
The UniSLIC14 is a family of Ultra Low Power SLICs. The feature set and common pinouts of the UniSLIC14 family positions it as a universal solution for: Plain Old Telephone Service (POTS), PBX, Central Office, Loop Carrier, Fiber in the Loop, ISDN-TA and NT1+, ...
The HC5513 is a subscriber line interface circuit which is interchangeable with Ericssons PBL3764 for distributed central office applications. Enhancements include immunity to circuit latch-up during hot plug and absence of false signaling in the presence of ...
The UniSLIC14 is a family of Ultra Low Power SLICs. The feature set and common pinouts of the UniSLIC14 family positions it as a universal solution for: Plain Old Telephone Service (POTS), PBX, Central Office, Loop Carrier, Fiber in the Loop, ISDN-TA and NT1+, ...
The UniSLIC14 is a family of Ultra Low Power SLICs. The feature set and common pinouts of the UniSLIC14 family positions it as a universal solution for: Plain Old Telephone Service (POTS), PBX, Central Office, Loop Carrier, Fiber in the Loop, ISDN-TA and NT1+, ...
The UniSLIC14 is a family of Ultra Low Power SLICs. The feature set and common pinouts of the UniSLIC14 family positions it as a universal solution for: Plain Old Telephone Service (POTS), PBX, Central Office, Loop Carrier, Fiber in the Loop, ISDN-TA and NT1+, ...
The HC5515 is a subscriber line interface circuit which is interchangeable with Ericssons PBL3860 for distributed central office applications. Enhancements include immunity to circuit latch-up during hot plug and absence of false signaling in the presence of ...
The HC5523 is a subscriber line interface circuit which is interchangeable with Ericssons PBL3764A/4 for distributed central office applications. Enhancements include immunity to circuit latch-up during hot plug and absence of false signaling in the presence ...
The HC5526 is a subscriber line interface circuit that is compliant with CCITT standards. Enhancements include immunity to circuit latch-up during hot plug and absence of false signaling in the presence of longitudinal currents. The HC5526 is fabricated ...
The HC5549 Subscriber line interface circuit is a 100V diellectrically isolated bipolar integrated circuit for use in short loop ISDN, PABX and Pairgain applications. The HC5549 has been optimized for low power as required for battery backed remote terminals ...
The Intersil HC5503 low cost SLIC is optimized for use in small Analog or mixed Analog and Digital Key Telephone Systems (KTS) or PBX products. The low component count solution and surface mount package options, enable a small desktop Key System/PBX product to ...
The Intersil HC5503T is a low cost Subscriber Line Interface Circuit (SLIC) that replaces the components of a discrete Transformer Analog circuit design. The monolithic integrated design provides improved performance and system reliability. The HC5503T ...
The Intersil HC5504B SLIC incorporates many of the BORSHT functions on a single IC chip. This includes DC battery feed, a ring relay driver, supervisory and hybrid functions. This device is designed to maintain transmission performance in the presence of ...
The RSLIC18 family of ringing subscriber line interface circuits (RSLIC) supports analog Plain Old Telephone Service (POTS) in short and medium loop length, wireless and wireline applications. Ideally suited for remote subscriber units, this family of products ...
The RSLIC18 family of ringing subscriber line interface circuits (RSLIC) supports analog Plain Old Telephone Service (POTS) in short and medium loop length, wireless and wireline applications. Ideally suited for remote subscriber units, this family of products ...
The RSLIC-VoIP family of ringing subscriber line interface circuits (RSLIC) supports analog Plain Old Telephone Service (POTS) in short and medium loop length, wireless and wireline applications. Ideally suited for remote subscriber units, this family ...
The 3.3V family of ringing subscriber line interface circuits (SLIC) supports analog Plain Old Telephone Service (POTS) in short and medium loop length, wireless and wireline voice over broadband applications. Ideally suited for customer premise equipment, ...
The ISL5586 is a very low power Ringing Subscriber Interface circuit designed for use with the Broadcom BCM3352 Cable Modem Chip, with on-board voiceband codecs, or other 3.3V voiceband codec devices. The ISL5586 provides on board ringing signal ...
The ISL5571A is a solid state device designed to replace the electromechanical relay used on Subscriber Line Cards. The device contains two Line Break MOSFET switches, one Ring Return MOSFET switch and one Ring Access SCR switch. The ISL5571A is ...
The PDI11394L40, Philips Semiconductors Full Duplex 1394
Audio/Video (AV) Link Layer Controller, is an IEEE 1394a-2000
compliant link layer controller featuring 2 embedded AV layer
interfaces.
The application data is packetized according to the IEC ...
The PDI1394P23 provides the digital and analog transceiver functions
needed to implement a two/one port node in a cable-based IEEE
1394-1995 and/or 1394a-2000 network. Each cable port incorporates
two differential line transceivers. The transceivers include ...
The PDI1394P25 provides the digital and analog transceiver functions
needed to implement a one port node in a cable-based IEEE
1394-1995 and/or 1394a network. Each cable port incorporates two
differential line transceivers. The transceivers include ...
The ST70138 is supplied in two packages,
LBGA80 and TQFP144. The ST70138T,
packaged in TQ144, is pin-compatible to the
ST70137 legacy ADSL USB chipset, enabling
manufacturers to benefit directly from the cost
and performance advantages that the ...
The AT76C506A is a single-chip baseband controller that can handle IEEE 802.11b
standard compliant data rates of up to 11 Mbps and provides all processing and func-
tionality needed for the MAC protocol of IEEE 802.11b. The AT76C506A is a slave PCI
device ...
The AT76C504A is a single-chip baseband controller that can handle IEEE 802.11b
standard compliant data rates of up to 11 Mbps and provides all processing and func-
tionality needed for the MAC protocol of IEEE 802.11b. AT76C504A provides a ...
The AT76C505A is a single-chip baseband controller that can handle IEEE 802.11b
standard compliant data rates of up to 11 Mbps and provides all processing and func-
tionality needed for the MAC protocol of IEEE 802.11b. The AT76C505A is a full speed
USB 2.0 ...
The AT76C517 provides complete modem functionality for an 802.11a/b/g wireless LAN chip
set. It contains signal processing functionality for both DSSS/CCK and OFDM modula-
tion/demodulation. It supports both short and long PLCP preamble formats for 802.11b ...
The MAX3803 equalizer automatically provides compensation for transmission-medium losses encountered with FR4 stripline and cable in an incredibly small 2mm x 2.5mm package. It is ideal for backplane applications requiring up to 40in between the line card and ...
The
MSM7602 is an improved version of the MSM7520 with the same basic configuration.
The MSM7602 uses a 19.2 MHz clock frequency to meet PHS, the 3 V power supply
(2.7 V to 5.5 V), and compact packaging. Also, this device adds the howling
detecter ...
The
MSM7617 cancels echoes (acoustic or line echoes) generated in voice channels. It
is a low-power CMOS LSI device with two channels.
MSM7617 echo canceling is performed by digital signal processing. It negates
echoes by estimating the echo channel ...
The
MSM6927 and the MSM6947 are OKI\'s 1200 bps single chip modem series which
transmit and receive serial, binary data over a switched telephone network using
frequency shift keying (FSK).
The MSM6927 is compatible with ITU-T V.23 series data sets, ...
The
MSM6948 is a single-chip MSK (Minimum Shift Keying) modem which is fabricated by
Oki\'s low power consumption CMOS silicon gate technology.
The demodulator receives the data to be transmitted (SD) synchronized with
the transmit timing clock (ST) ...
The
MSM7510 is useful for the ITU-T V.21 modem, for example, low-cost, built-in
modems, telecontrol systems, home security systems, etc.
The family version, MSM7512B for ITU-T V.23 will be available following this
device. Oki has been mass-producing ...
The
MSM7512B is useful for the ITU-T V.23 modem, for examples, low-cost built-in
modems, telecontrol systems, home security systems, etc.
The family version, MSM7510 for ITU-T V.21 will be available following this
device. Oki has been mass-producing ...
The
MSM7580 is an ADPCM transcoder which is used by the new digital cordless system.
It converts 64 kbps voice PCM serial data to 32 kbps ITU-T G.721 ADPCM serial
data, and vice versa.
This device consists of two systems with full-duplex voice data ...
The
MSM7581 is an ADPCM transcoder which is used by the new digital cordless system.
It converts 64 kbps voice PCM serial data to 32 kbps ITU-T G.721 ADPCM serial
data, and vice versa.
This device consists of four systems with full-duplex voice data ...
The
MSM7728 is a single-channel linear CODEC CMOS IC for voice signals that contains
filters for A/D and D/A conversions. Designed especially for a single-power
supply and low-power applications, the device is optimized for applications for
the analog ...
The ML7020 is a 1200 bps modem LSI developed for remote control systems. The functions incorporated are
those of a 1200 bps FSK modem conforming to ITU-T Recommendations V.23, DTMF signal generation and
detection, call progress tone (CPT) generation and ...
The KGL4136HD is a high performance Mach Zehnder Modulator driver for SONET/SDH up to
10.7Gb/s. The device provides a Differential output amplitude > 7.4Vpp ( single ended >3.7Vpp
each ), output amplitude control, and duty cycle (X-Point) control. ...
Manufactured in ISO 2 -CMOS, these integrated filter/ codecs are designed to meet the demanding performance needs of the digital telecommunications industry, e.g., PABX, Central Office, Digital telephones. ...
Manufactured in ISO 2 -CMOS, these integrated filter/ codecs are designed to meet the demanding performance needs of the digital telecommunications industry, e.g., PABX, Central Office, Digital telephones. ...
Manufactured MT8962 in ISO 2 -CMOS, these integrated filter/ codecs are designed to meet the demanding performance needs of the digital telecommunications industry, e.g., PABX, Central Office, Digital telephones. ...
Manufactured MT8963 in ISO 2 -CMOS, these integrated filter/ codecs are designed to meet the demanding performance needs of the digital telecommunications industry, e.g., PABX, Central Office, Digital telephones. ...
Manufactured MT8964 in ISO 2 -CMOS, these integrated filter/ codecs are designed to meet the demanding performance needs of the digital telecommunications industry, e.g., PABX, Central Office, Digital telephones. ...
Manufactured MT8965 in ISO 2 -CMOS, these integrated filter/ codecs are designed to meet the demanding performance needs of the digital telecommunications industry, e.g., PABX, Central Office, Digital telephones. ...
Manufactured MT8966 in ISO 2 -CMOS, these integrated filter/ codecs are designed to meet the demanding performance needs of the digital telecommunications industry, e.g., PABX, Central Office, Digital telephones. ...
Manufactured MT8967 in ISO 2 -CMOS, these integrated filter/ codecs are designed to meet the demanding performance needs of the digital telecommunications industry, e.g., PABX, Central Office, Digital telephones. ...
The MH88632B Central Office Interface Circuit provides a complete analog and signalling link between audio switching equipment and a subscriber line. The device is available in a single in line package for high packing densities. The device is fabricated ...
The MH88634-2 Central Office Interface Circuit trunk provides a complete analogue and signalling link between audio switching equipment and a telephone Line. The device is available in a single in line package for high packing densities or with a lead frame ...
The MH88634CV-K Central Office Interface Circuit trunk provides a complete analog and signalling link between audio switching equipment and a telephone line. The device is fabricated as a thick film hybrid incorporating various technologies for optimum ...
The MT8979 is a single chip CEPT digital trunk transceiver that meets the requirements of CCITT Recommendation G.704 for digital multiplex equipment. The MT8979 is fabricated in low power ISO-CMOS technology. ...
The MT90500 Multi-Channel AAL1 SAR is a highly integrated solution which allows systems based on a telecom bus to be interfaced to ATM networks using ATM Adaptation Layer 1 (AAL1), ATM Adaptation Layer 5 (AAL5) and ATM Adaptation Layer 0 (AAL0). The MT90500 ...
The MT90502 Multi-Channel AAL2 SAR bridges a standard TDM (Time Division Multiplexed) backplane to a standard ATM (Asynchronous Transfer Mode) bus. The device provides the CPS (Common Part Sublayer) and SAR (Segmentation and Reassembly) engines. The MT90502 ...
The MT90520 8-Port Primary Rate Circuit Emulation AAL1 SAR allows primary rate TDM circuits to be carried over ATM networks using Circuit Emulation Services. Up to 256 bi-directional ATM VC connections can be simultaneously processed by the MT90520 CES AAL1 ...
MT90810 is a Flexible MVIP Interface Circuit (FMIC). The MVIP (Multi-Vendor Integration Protocol) compliant device provides a complete MVIP compliant interface between the MVIP Bus and a wide variety of processors, telephony interfaces and other circuits. A ...
The MT88E39 Calling Number Identification Circuit (CNIC1.1) is a CMOS integrated circuit which provides an interface to calling line information delivery services that utilize 1200 baud Bell 202 or CCITT V.23 FSK data transmission schemes. The MT88E39 receives ...
The MT88E43B Calling Number Identification Circuit 2 is a low power CMOS integrated circuit intended for receiving physical layer signals transmitted according to BT (British Telecom) SIN227 & SIN242, the U.K.\'s CCA (Cable Communications Association) TW/P
The MT88E45 is a low power CMOS integrated circuit suitable for receiving the physical layer signals used in North American (Bellcore) Calling Identity Delivery on Call Waiting (CIDCW) and Calling Identity Delivery (CID) services. ...
The MT88E46 is a CMOS integrated circuit suitable for receiving the FSK and CAS signals in North American (Bellcore) CIDCW, CWD and CID (Calling Identity Delivery) services. It provides an optimal solution for the CIDCW (also known as Type 2) and CWD ...
The MT9122 Voice Echo Canceller implements a cost effective solution for telephony voice-band echo cancellation conforming to ITU-T G.165 requirements. The MT9122 architecture contains two echo cancellers which can be configured to provide dual channel 64 ...
The MT9123 Voice Echo Canceller implements a cost effective solution for telephony voice-band echo cancellation conforming to ITU-T G.165 requirements. The MT9123 architecture contains two echo cancellers which can be configured to provide dual channel 64 ...
The MT9300B is not recommended for new designs. Please refer to the ZL50232 or ZL38065. The MT9300B Voice Echo Canceller implements a cost effective solution for telephony voice-band echo cancellation conforming to ITU-T G.168 requirements. The MT9300B ...
The MT93L00A is not recommended for new designs. Please refer to the ZL50232 or ZL38065. The MT93L00 Voice Echo Canceller implements a cost effective solution for telephony voice-band echo cancellation conforming to ITU-T G.168 requirements. The MT93L00 ...
The MT93L04 Voice Echo Canceller implements a cost effective solution for telephony voice-band echo cancellation conforming to ITU-T G.168 requirements. The MT93L04 architecture contains 64 groups of two echo cancellers (ECA and ECB) which can be configured to ...
Zarlink has introduced a new generation family of AEC (ZL38002 and ZL38004). Zarlink recommends these products for new designs.The MT93L16 device contains two echo cancellers, as well as the many control functions necessary to operate the echo cancellers. One ...
Zarlink has introduced a new generation family of AEC (ZL38002 and ZL38004). Zarlink recommends these products for new designs.The ZL38001 device contains an acoustic echo canceller and a line echo canceller as well as the many control functions necessary to ...
The ZL38002 device is comprised of an acoustic echo canceller and the necessary control functions for operation. The ZL38002 guarantees clear signal transmission in both transmit and receive audio path directions to ensure reliable voice Communication even ...
The ZL38003 is an Acoustic Echo Canceller (AEC) with dual codec. The ZL38003 provides 127 ms of acoustic echo cancellation, which makes it ideal for hand free car kits, and speaker phones designs. Each of the codecs in the dual codec can be connected to 1 of 4 ...
To learn more about the voice processing products, including technical documents, please contact your sales representative.
The ZL38004 is supported by the ZLS38500 firmware pack for hands-free car kits and the ZLS38501 firmware pack for speakerphone. ...
The Quad ADPCM Transcoder is a low power, CMOS device capable of four encode and four decode functions per frame. Four 64 kbps PCM octets are compressed into four 32, 24 or 16 kbps ADPCM words, and four 32, 24 or 16 kbps ADPCM words are expanded into four 64 ...
The Quad ADPCM Transcoder ZL38010 is a low power, CMOS device capable of four encode and four decode functions per frame. Four 64 kbps PCM octets are compressed into four 32, 24 or 16 kbps ADPCM words, and four 32, 24 or 16 kbps ADPCM words are expanded into ...
The PDSP16488A is a fully integrated, application specific, image processing device. It performs a two dimensional convolution between the pixels within a video window and a set of stored coefficients. An internal multiplier accumulator array can be ...
The ML6652 is a high performance, low cost, multifunction, multi-standard Single-Chip Media Converter (MC). This highly integrated media converter provides both 10Mbps and 100Mbps signal conversion between both copper universal twisted pair (UTP) and fiber ...
ACPL-0820 is a high current dual line-driver IC. With a 5 V
single supply, it delivers up to 1.5 APP current. This is ideal
for high current diferential mode applications such as a
Powerline modem.
ACPL-0820 is internally protected against ...
SMSC\'s COM20019I is a member of the family of Embedded ARCNET Controllers from Standard
Microsystems Corporation. The device is a general purpose communications controller for networking
microcontrollers and intelligent peripherals in industrial, ...
SMSC\'s COM20020ID is a member of the family of Embedded ARCNET Controllers from Standard
Microsystems Corporation. The device is a general purpose communications controller for networking
microcontrollers and intelligent peripherals in industrial, ...
The PM7340 S/UNI IMA 8 is a monolithic integrated circuit that implements the Inverse Multiplexing for ATM (IMA 1.1) with backward compatibility to IMA 1.0 and the Transmission ...