• Product pinout
  • Description
  • DS10CP152,1.5 Gbps 2X2 LVDS Crosspoint Switch
  • The DS10CP152 is a 1.5 Gbps 2x2 LVDS crosspoint switch optimized for high-speed signal routing and switching over lossy FR-4 printed circuit board backplanes and balanced cables. Fully differential signal paths ensure exceptional signal integrity and noise ...
  • DS10CP154,1.5 Gbps 4x4 LVDS Crosspoint Switch
  • The DS10CP154 is a 1.5 Gbps 4x4 LVDS crosspoint switch optimized for high-speed signal routing and switching over FR-4 printed circuit board backplanes and balanced cables. Fully differential signal paths ensure exceptional signal integrity and ...
  • DS90CP04,4x4 Low Power 2.5 Gb/s LVDS Digital Cross-Point Switch
  • DS90CP04 is a 4x4 digital cross-point switch with broadside input and output pins for efficient board layout. It utilizes Low Voltage Differential Swing (LVDS) technology for low power, high-speed operation. Data paths are fully differential from input to ...
  • DS90CP22,2X2 800 Mbps LVDS Crosspoint Switch
  • DS90CP22 is a 2x2 crosspoint switch utilizing LVDS (Low Voltage Differential Signaling) technology for low power, high speed operation. Data paths are fully differential from input to output for low noise generation and low pulse width distortion. The ...
  • CLC018,8 X 8 Digital Crosspoint Switch, 1.485 Gbps
  • The CLC018 is a fully differential 8x8 digital crosspoint switch capable of operating at data rates exceeding 1.485 Gbps per channel. Its non-blocking architecture utilizes eight independent 8:1 multiplexers to allow each output to be independently connected ...
  • AD8104,600 MHz, 32 × 16 Buffered Analog Crosspoint Switch
  • The AD8104/AD8105 are high speed, 32 16 analog crosspoint switch matrices. They offer 600 MHz bandwidth and slew rate of 1800 V/s for high resolution computer graphics (RGB) signal switching. With less than 70 dB of crosstalk and 90 dB isolation (@ 5 MHz), ...
  • AD8105,600 MHz, 32 × 16 Buffered Analog Crosspoint Switch
  • The AD8104/AD8105 are high speed, 32 16 analog crosspoint switch matrices. They offer 600 MHz bandwidth and slew rate of 1800 V/s for high resolution computer graphics (RGB) signal switching. With less than 70 dB of crosstalk and 90 dB isolation (@ 5 MHz), ...
  • AD8106,260 MHz, 16 × 5 Buffered Video Crosspoint Switches
  • The AD8106 and AD8107 are high speed, 16 5 video crosspoint switch matrices. They offer a -3 dB signal bandwidth greater than 260 MHz, and channel switch times of less than 25 ns with 1% settling. With -78 dB of crosstalk and -97 dB isolation (@ 5 MHz), the ...
  • AD8107,260 MHz, 16 × 5 Buffered Video Crosspoint Switches
  • The AD8106 and AD8107 are high speed, 16 5 video crosspoint switch matrices. They offer a -3 dB signal bandwidth greater than 260 MHz, and channel switch times of less than 25 ns with 1% settling. With -78 dB of crosstalk and -97 dB isolation (@ 5 MHz), the ...
  • AD8113,Audio/Video 60MHz 16 X 16 Crosspoint Switch
  • The AD8113 is a fully buffered crosspoint switch matrix that operates on 12V for Audio applications and 5V for Video applications. It offers a -3dB signal bandwidth greater than 60MHz and channel switch times of less than 60ns with 0.1% settling for use in ...
  • AD8114,Low Cost 225 MHz 16 X 16 Crosspoint Switch, G=+1
  • The AD8114/AD8115 is packaged in 100-lead LQFP package and is available over the extended industrial temperature range of 40C to +85C.
    An evaluation board is available for this product and may be ordered using the following product number: AD8114-EVAL and ...
  • AD8115,Low Cost 225 MHz 16 X 16 Crosspoint Switch, G=+2
  • The AD8114/AD81151 are high speed 16 x 16 video crosspoint switch matrices. They offer a 3 dB signal bandwidth greater than 200 MHz, and channel switch times of less than 50 ns with 1% settling. With 70 dB of crosstalk and 90 dB isolation (@ 5 MHz), the ...
  • AD8116,200 MHz, 16 × 16 Buffered Video Crosspoint Switch
  • The AD8116 is a high speed 16 16 video crosspoint switch matrix. It offers a -3 dB signal bandwidth greater than 200 MHz and channel switch times of 50 ns with 0.1% settling. With -60 dB of crosstalk and -105 dB of isolation (@ 10 MHz), the AD8116 is useful ...
  • AD8117,600 MHz, 32 × 32 Buffered Analog Crosspoint Switch
  • The AD8117/AD8118 are high speed, 32 32 analog crosspoint switch matrices. They offer 600 MHz bandwidth and slew rate of 1800 V/s for high resolution computer graphics (RGB) signal switching. With less than 70 dB of crosstalk and 90 dB isolation (@ 5 MHz), ...
  • AD8118,600 MHz, 32 × 32 Buffered Analog Crosspoint Switch
  • The AD8117/AD8118 are high speed, 32 32 analog crosspoint switch matrices. They offer 600 MHz bandwidth and slew rate of 1800 V/s for high resolution computer graphics (RGB) signal switching. With less than 70 dB of crosstalk and 90 dB isolation (@ 5 MHz), ...
  • AD8175,500 MHz, Triple 16 × 9 Video Crosspoint Switch
  • The AD8175 is a high speed, triple 16 9 video crosspoint switch matrix. It supports 1600 1200 RGB displays @ 85 Hz refresh rate, by offering a 500 MHz bandwidth and a slew rate of 1800 V/s. With 88 dB of crosstalk and 94 dB isolation (@ 5 MHz), the AD8175 is ...
  • AD8176,450 MHz, Triple 16 × 9 Video Crosspoint Switch
  • The AD8176 is a high speed, triple 16 9 video crosspoint switch matrix. It supports 1600 1200 RGB displays @ 85 Hz refresh rate, by offering a 450 MHz bandwidth and a slew rate of 1650 V/s. With 82 dB of crosstalk and 90 dB isolation (@ 5 MHz), the AD8176 is ...
  • AD8177,500 MHz, Triple 16 × 5 Video Crosspoint Switch
  • The AD8177 is a high speed, triple 16 5 video crosspoint switch matrix. It supports 1600 1200 RGB displays @ 85 Hz refresh rate by offering a 500 MHz bandwidth and a slew rate of 1800 V/s. With 88 dB of crosstalk and 94 dB isolation (@ 5 MHz), the AD8177 is ...
  • AD8178,450 MHz, Triple 16 × 5 Video Crosspoint Switch
  • The AD8178 is a high speed, triple 16 5 video crosspoint switch matrix. It supports 1600 1200 RGB displays @ 85 Hz refresh rate, by offering a 450 MHz bandwidth and a slew rate of 1650 V/s. With 82 dB of crosstalk and 90 dB isolation (@ 5 MHz), the AD8178 is ...
  • AD8150,1.5 Gb/s, 33x17 Digital Crosspoint Switch
  • The AD8150\'s flexible supply voltages allow the user to operate with either PECL or ECL data levels and will even operate down to 3.3 V for further power reduction. The control interface is CMOS/TTL compatible (3 V to 5 V).
    Its fully differential ...
  • AD8151,3.2 Gbps, 33 X 17 Digital Crosspoint Switch
  • Its fully differential signal path reduces jitter and crosstalk, while allowing the use of smaller, single-ended voltage swings.
    The AD8151 is offered in a 184-lead LQFP package that operates over the extended commercial temperature range of 0C to ...
  • AD8152,34 X 34, 3.2 Gb/s Digital Crosspoint Switch
  • AD8152 is a member of the X stream line of products and is a breakthrough in digital switching, offering a large switch array (34 34) on very little power, typically 2.0 W. Additionally, it operates at data rates up to 3.2 Gbps per port, making it suitable ...
  • AD8156,6.25 Gbps, 4 × 4, Digital Crosspoint Switch With EQ
  • The AD8156, a member of the Xstream line of products, is a high speed, fully differential, digital crosspoint switch. The part can function as a 4 4 crosspoint switch with double-latched memory, allowing simultaneous updates, or as a dual 2 2 with direct ...
  • FIN1022,2 X 2 LVDS High Speed Crosspoint Switch
  • This non-blocking 2x2 crosspoint switch FIN1022 has a fully differential input to output data path for low noise generation and low pulse width distortion. The device can be used as a high speed crosspoint switch, 2:1 multiplexer, 1:2 demultiplexer or 1:2 ...
  • HA456,120MHz, Low Power, 8x8 Video Crosspoint Switch
  • The HA456 is the first 8 x 8 video crosspoint switch suitable for high performance video systems. Its high level of integration significantly reduces component count, board space, and cost. The crosspoint switch contains a digitally controlled matrix of 64 ...
  • ISL59530,16x16 Video Crosspoint
  • The ISL59530 is a 300MHz 16x16 Video Crosspoint Switch. Each input has an integrated DC-restore clamp and an input buffer. Each output has a fast On-Screen Display (OSD) switch (for inserting graphics or other video) and an output buffer. The switch is ...
  • ISL59531,16x16 Video Crosspoint With Differential Inputs
  • The ISL59531 is a 16x16 integrated video crosspoint switch matrix with differential input and On-Screen Display (OSD) insertion. The ISL59531 is ideal for routing video signals in security and video-on-demand systems. This device operates from a single +5V ...
  • ISL59532,32x32 Video Crosspoint
  • The ISL59532 is a 300MHz 32x32 Video Crosspoint Switch. Each input has an integrated DC-restore clamp and an input buffer. Each output has a fast On-Screen Display (OSD) switch (for inserting graphics or other video) and an output buffer. The switch is ...
  • ISL59533,32x32 Video Crosspoint With Differential Inputs
  • The ISL59533 is a 32x32 integrated video crosspoint switch matrix with input and output buffers and On-Screen Display (OSD) insertion. The ISL59533 is ideal for routing video signals in security and video-on-demand systems. This device operates from a single ...
  • ISL59534,32x16 Video Crosspoint
  • The ISL59534 is a 300MHz 32x16 Video Crosspoint Switch. Each input has an integrated DC-restore clamp and an input buffer. Each output has a fast On-Screen Display (OSD) switch (for inserting graphics or other video) and an output buffer. The switch is ...
  • CD22M3494,16x8x1 BiMOS-E Crosspoint Switch
  • The Intersil CD22M3494 is an array of 128 analog switches capable of handling signals from DC to video. Because of the switch structure, input signals may swing through the total supply voltage range, VDD to VEE. Each of the 128 switches may be addressed via ...
  • MAX3640,MAX3640 3.3V, 622Mbps LVDS, Dual 4:2 Crosspoint Switch
  • The MAX3640 is a dual-path crosspoint switch for use at OC-12 data rates. The MAX3640 can be used to receive and transmit 622Mbps low-voltage differential signals (LVDS) across a backplane with minimum jitter accumulation. Each path incorporates input buffers, ...
  • MAX3840,MAX3840 +3.3V, 2.7Gbps Dual 2 X 2 Crosspoint Switch
  • The MAX3840 is a dual 2 x 2 asynchronous crosspoint switch for SDH/SONET DWDM and other high-speed data switching applications where serial data stream loop-through and protection channel switching are required. It is ideal for OC-48 systems with ...
  • MAX3841,MAX3841 12.5Gbps, CML, 2 X 2 Crosspoint Switch
  • The MAX3841 is a low-power, 12.5Gbps, 2 x 2 crosspoint switch IC for high-speed serial data loopback, redundancy, and switching applications. The MAX3841 current-mode logic (CML) inputs and outputs have isolated VCC connections to enable DC-coupled interfaces ...
  • SY55854U,SY55854U 2 X 2 Protection Crosspoint Switch
  • The SY55854U is a fully differential, CML, 2 x 2-crosspoint switch. The non-blocking design allows any input to be connected to any output. Varying the state of the select inputs allows SY55854U to be used in backup, fault tolerant, protection, and ...
  • SY55859L,SY55859L 3.3v, 2.7gbps Dual 2x2 Crosspoint Switch
  • The SY55859L is a dual CML 2x2 crosspoint switch optimized for high-speed data and/or clock applications (up to 2.7Gbps or 2.7GHz) where low jitter and skew are critical. This device is pin-for-pin, plug-in compatible to the MAX3840. Each 2x2 of the ...
  • LF2250,12 X 10-bit Matrix Multiplier
  • The LF2250 is a high-speed matrix multiplier consisting of an array of nine 12 x 10-bit multipliers. Internal summing adders are also included to provide the configurations needed to implement matrix multiplications, cascadable FIR filters, and ...
  • SN65LVCP23D,2x2 LVPECL Crosspoint Switch
  • The SN65LVCP23 is a 2x2 LVPECL crosspoint switch provding greater than 2000 Mbps operation for each path. The dual channels incorporate wide common-mode (0 V to 4 V) receivers, allowing for the receipt of LVDS, LVPECL, and CML signals. The dual outputs are ...
  • SN65LVDS125A,1.5 GBPS LVDS 4 X 4 CROSSPOINT SWITCH
  • The SN65LVDS125A and SN65LVDT125A are 4x4 nonblocking Crosspoint Switches Low-voltage differential signaling (LVDS) is used to achieve signaling rates of 1.5 Gbps per channel. Each output driver includes a 4:1 multiplexer to allow any input to be routed ...
  • M22100,4 X 4 Crosspoint Switch With Control Memory
  • The M22100 combines a 4 x 4 array of crosspoints (transmission gates) with a4-line-to-16-line decoder and 16 latch circuits. Any one of the sixteen trans- mission gates (crosspoints) can be selected by ap- plying the appropriate four line address. ...