Low-power, 8-Bit DAC With High-speed I2C Input
The DAC5571 is a low-power, single-channel, 8-bit buffered voltage output DAC Its on-chip precision output Amplifier allows Rail-to-Rail output swing to be achieved. The DAC5571 utilizes an I2C-compatible, two-wire serial Interface that operates at Clock rates up to 3.4 Mbps with address support of up to two DAC5571s on the same data bus.
The output voltage range of the DAC is 0 V to VDD. The DAC5571 incorporates a power-on-reset circuit that ensures that the DAC output powers up at zero volts and remains there until a valid write to the device takes place. The DAC5571 contains a power-down feature, accessed via the internal control Register that reduces the current consumption of the device to 50 nA at 5 V.
The low-power consumption of this part in normal operation makes it ideally suited for portable battery operated equipment. The power consumption is less than 0.7 mW at VDD = 5 V reducing to 1 ?W in power-down mode.
DAC7571 6571/5571 are 12/10/8-bit, single-channel I2C DACs from the same family. DAC7574 6574/5574 and DAC7573 6573/5573 are 12/10/8-bit quad-channel I2C DACs Also see DAC8571 8574 for single/quad-channel, 16-bit I2C DACs
By Texas Instruments
|DAC5571IDBVR||Texas Instruments||SERIAL INPUT LOADING, 6us SETTLING TIME, 8-BIT DAC, PDSO6, GREEN, PLASTIC, SOT-23, 6 PIN|
|DAC5571IDBVRG4||Texas Instruments||SERIAL INPUT LOADING, 6us SETTLING TIME, 8-BIT DAC, PDSO6, GREEN, PLASTIC, SOT-23, 6 PIN|
|DAC5571IDBVTG4||Texas Instruments||SERIAL INPUT LOADING, 6us SETTLING TIME, 8-BIT DAC, PDSO6, GREEN, PLASTIC, SOT-23, 6 PIN|
|DAC5571IDBVT||Texas Instruments||Low-power, 8-Bit DAC with high-speed I2C Input 6-SOT-23 -40 to 105|
|DAC5571EVM||Texas Instruments||DAC5571 Evaluation Module|
|DAC5571 Pb-Free||DAC5571 Cross Reference||DAC5571 Schematic||DAC5571 Distributor|
|DAC5571 Application Notes||DAC5571 RoHS||DAC5571 Circuits||DAC5571 footprint|