DS1321 Flexible Nonvolatile Controller With Lithium Battery

The DS1321 Flexible Nonvolatile Controller with Lithium Battery Monitor is a CMOS circuit which solves the application problem of converting CMOS SRAMs into nonvolatile memory. Incoming power is monitored for an out-of-tolerance condition. When such a condition is detected, chip enable outputs are inhibited to accomplish write protection and the battery is switched on to supply the SRAMs with uninterrupted power. Special circuitry uses a low-leakage CMOS process which affords precise voltage detection at extremely low battery consumption. One DS1321 CAN support as many as four SRAMs arranged in any of three memory configurations.
In addition to battery-backup support, the DS1321 performs the important function of monitoring the remaining capacity of the lithium battery and providing a warning before the battery reaches end-of-life. Because the open-circuit voltage of a lithium backup battery remains relatively constant over the majority of its life, accurate battery monitoring requires loaded-battery voltage measurement. The DS1321 performs such measurement by periodically comparing the voltage of the battery as it supports an internal resistive load with a carefully selected reference voltage. If the battery voltage falls below the reference voltage under such conditions, the battery will soon reach end-of-life. As a result, the Battery Warning pin is activated to signal the need for battery replacement.
By Maxim Integrated Products
DS1321 's PackagesDS1321 's pdf datasheet

DS1321 Pinout, Pinouts
DS1321 pinout,Pin out
This is one package pinout of DS1321,If you need more pinouts please download DS1321's pdf datasheet.

DS1321 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

DS1321 Pb-Free DS1321 Cross Reference DS1321 Schematic DS1321 Distributor
DS1321 Application Notes DS1321 RoHS DS1321 Circuits DS1321 footprint