Btl Turbotransceiver?⠭ National Semiconductor

The TURBOTRANSCEIVER is designed for use in very high speed bus systems. The bus terminal characteristics of the TURBOTRANSCEIVER are referred to as Backplane Transceiver Logic (BTL). BTL is a new Logic signaling stan- dard that has been developed to enhance the performance of Backplane buses. BTL compatible transceivers feature low output capacitance drivers to minimize bus loading, a 1V nominal signal swing for reduced power consumption and receivers with precision thresholds for maximum noise im- munity. This new standard eliminates the settling time de- lays, that severely limit the TTL bus performance, to provide significantly higher bus transfer rates. The TURBOTRANSCEIVER is compatible with the require- ments of the proposed IEEE 896 Futurebus draft standard. It is similar to the DS3896 97 BTL TRAPEZOIDAL Trans- ceivers but the trapezoidal feature has been removed to improve the propagation delay. A stripline Backplane is there- fore required to reduce the crosstalk induced by the faster rise and fall times. This device CAN drive a 10 load with a typical propagation delay of 3.5 ns for the driver and 5 ns for the receiver. By National Semiconductor Corporation
DS3893A 's PackagesDS3893A 's pdf datasheet

DS3893A Pinout, Pinouts
DS3893A pinout,Pin out
This is one package pinout of DS3893A,If you need more pinouts please download DS3893A's pdf datasheet.

DS3893A circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

DS3893A Pb-Free DS3893A Cross Reference DS3893A Schematic DS3893A Distributor
DS3893A Application Notes DS3893A RoHS DS3893A Circuits DS3893A footprint