DS4M125, DS4M133, DS4M200 - NEW! - 3.3V Margining Clock Oscillator With LVPECL/LVDS Output

The DS4M125 DS4M133 DS4M200 are margining Clock Oscillators with LVPECL or LVDs outputs. They are designed to fit in a 5mm x 3.2mm ceramic package with an AT-cut fundamental-mode crystal to form a complete Clock Oscillator The circuit CAN generate the following frequencies and their 5% frequency deviations: 125MHz, 133.33MHz, and 200MHz. The DS4M125 DS4M133 DS4M200 employ a low-jitter PLL to generate the frequencies. The typical phase jitter is less than 0.9ps RMS from 12kHz to 20MHz.
Frequency margining is a circuit operation to change the output frequency to 5% higher or 5% lower than the nominal frequency. Frequency margining is accomplished through the margining select pin, MS. This three-state input pin accepts a three-level voltage signal to control the output frequency. In a low-level state, the output frequency is set to the nominal frequency. When set to a high-level state, the frequency output is set to the nominal frequency plus 5%. When set to the mid-level state, the frequency output is equal to the nominal frequency minus 5%. If left open, the MS pin is pulled low by an internal 100k (nominal) pulldown resistor.
The DS4M125 DS4M133 DS4M200 are available with either an LVPECL or LVDs output. The output 632 CAN be disabled by pulling the OE pin low. When disabled, both OUTP and OUTN levels of the LVPECL driver go to the LVPECL bias voltage, while the output of the LVDs driver is a logical one. The OE input is an active-high Logic signal and has an internal 100k pullup resistor. When OE is in a logic-high state, the OUTP and OUTN outputs are enabled.
The devices operate from a single 3.3V supply voltage.
By Maxim Integrated Products
Part Manufacturer Description Datasheet Samples
DS4M133D+33 Maxim Integrated Products Clock Generator, 133.33MHz, Bipolar, CQCC10, 5 X 3.20 MM, 1.49 MM HEIGHT, LEAD FREE, CERAMIC, LCCC-10
DS4M133P+33 Maxim Integrated Products Clock Generator, 133.33MHz, Bipolar, CQCC10, 5 X 3.20 MM, 1.49 MM HEIGHT, LEAD FREE, CERAMIC, LCCC-10
DS4M133 's PackagesDS4M133 's pdf datasheet
DS4M133P33 LCCC
DS4M133D33 LCCC




DS4M133 Pinout, Pinouts
DS4M133 pinout,Pin out
This is one package pinout of DS4M133,If you need more pinouts please download DS4M133's pdf datasheet.

DS4M133 Application circuits
DS4M133 circuits
This is one application circuit of DS4M133,If you need more circuits,please download DS4M133's pdf datasheet.


Related Electronics Part Number

Related Keywords:

DS4M133 Pb-Free DS4M133 Cross Reference DS4M133 Schematic DS4M133 Distributor
DS4M133 Application Notes DS4M133 RoHS DS4M133 Circuits DS4M133 footprint