Two Channel Bus LVDS MUXed RepeaterThe is a repeater DS92LV222A designed specifically for the bridging of multiple Backplanes in a rack. The utilizes low voltage differential signaling to deliver high speed while consuming minimal power with reduced EMI The RSEL pin and DE pins allow maximum flexibility as to which receiver/driver are used. The repeats signals between Backplanes and accepts or drives signals onto the local bus. It also features a flow through pin out which allows easy PCB routing for short stubs between its pins and the connector.
The driver is selectable between 3.5 mA (100Ohm load) and 8.5 mA (27Ohm load) output loop currents depending upon the level applied to the ISEL pin. This allows for single termination (point-to-point) and also double termination (multipoint) applications while maintain similar differential levels. The receiver threshold is ?100 mV, while providing ?1V common mode range. By National Semiconductor Corporation |
|
DS92LV222A Pb-Free | DS92LV222A Cross Reference | DS92LV222A Schematic | DS92LV222A Distributor |
DS92LV222A Application Notes | DS92LV222A RoHS | DS92LV222A Circuits | DS92LV222A footprint |