Surface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 03029

DSCC Surface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 03029 By Vishay Intertechnology
Part Manufacturer Description Datasheet Samples
IS9-1845ASRH-8 Renesas Electronics Corporation
  • Electrically Screened to DSCC SMD # 5962-01509
  • QML Qualified per MIL-PRF-38535 Requirements
  • Radiation Environment
    • High Dose Rate: 300krad(SI) (Max)
    • Low Dose Rate: 50krad(SI) (Max)
    • SEL Immune: Dielectrically Isolated
    • SEU Immune: 35MeV/mg/cm2
    • SEU Cross-Section at 89MeV/mg/cm2: 5x10-6cm2
  • Low Start-up Current: 100µA (Typ)
  • Fast Propagation Delay: 80ns (Typ)
  • Supply Voltage Range: 12V to 20V
  • High Output Drive: 1A (Peak, Typ)
  • Undervoltage Lockout: 8.8V Start (Typ), 8.2V Stop (Typ)
  •  

     

    APPLICATIONS

  • Current-Mode Switching Power Supplies
  • Control of High Current FET Drivers
  • Motor Speed and Direction Control
  • ISL74422BRHVF Renesas Electronics Corporation $ QML Qualified per MIL-PRF-38535 Requirements $ Electrically Screened to DSCC SMD # 5962-03248 $ Radiation Environment $$ Total Dose (Max) 300krad(SI) $$ Latch-Up Immune $ IPEAK 9A (Min) $ TFALL (CL = 10nF) 135ns (Max) $ TRISE (CL = 10nF) 135ns (Max) $ Prop Delay High-Low (CL = 10nF) 175ns (Max) $ Prop Delay Low-High (CL = 10nF) 175ns (Max) $ Rising UVLO Threshold 7.5V (Max) $ Falling UVLO Threshold 6.0V (Min) $ UVLO Hysteresis 0.3V (Min) $ Wide Supply Voltage Range 8V to 18V $ Low Stand-by Current Consumption $$ Input Low 2.1mA (Max) $$ Input High 2.7mA (Max)
    ISL74422ARHVX Renesas Electronics Corporation $ QML Qualified per MIL-PRF-38535 Requirements $ Electrically Screened to DSCC SMD # 5962-01521 $ Radiation Environment $$ Total Dose (Max): 300krad(SI) $$ Latch-Up Immune $ IPEAK: 9A(Min) $ TF (CL = 10,000pF): 70ns(Typ); 90ns(Max) $ TR (CL = 10,000pF): 90ns(Typ); 105ns(Max) $ Prop Delay High-Low (CL = 10,000pF): 75ns(Max), 55ns(Typ) $ Prop Delay Low-High (CL = 10,000pF): 50ns(Max), 30ns(Typ) $ Consistent Delay Times with VCC Changes $ Wide Supply Voltage Range: 7V to 18V $ Low Stand-by Power Consumption $$ Input Low: <2mW(Max) $$ Inputs High: <18mW(Max) $ ESD Protected: >1750V
    IS7-1845ASRH-8 Renesas Electronics Corporation
  • Electrically Screened to DSCC SMD # 5962-01509
  • QML Qualified per MIL-PRF-38535 Requirements
  • Radiation Environment
    • High Dose Rate: 300krad(SI) (Max)
    • Low Dose Rate: 50krad(SI) (Max)
    • SEL Immune: Dielectrically Isolated
    • SEU Immune: 35MeV/mg/cm2
    • SEU Cross-Section at 89MeV/mg/cm2: 5x10-6cm2
  • Low Start-up Current: 100µA (Typ)
  • Fast Propagation Delay: 80ns (Typ)
  • Supply Voltage Range: 12V to 20V
  • High Output Drive: 1A (Peak, Typ)
  • Undervoltage Lockout: 8.8V Start (Typ), 8.2V Stop (Typ)
  •  

     

    APPLICATIONS

  • Current-Mode Switching Power Supplies
  • Control of High Current FET Drivers
  • Motor Speed and Direction Control
  • ISL74422BRHF/PROTO Renesas Electronics Corporation $ QML Qualified per MIL-PRF-38535 Requirements $ Electrically Screened to DSCC SMD # 5962-03248 $ Radiation Environment $$ Total Dose (Max) 300krad(SI) $$ Latch-Up Immune $ IPEAK 9A (Min) $ TFALL (CL = 10nF) 135ns (Max) $ TRISE (CL = 10nF) 135ns (Max) $ Prop Delay High-Low (CL = 10nF) 175ns (Max) $ Prop Delay Low-High (CL = 10nF) 175ns (Max) $ Rising UVLO Threshold 7.5V (Max) $ Falling UVLO Threshold 6.0V (Min) $ UVLO Hysteresis 0.3V (Min) $ Wide Supply Voltage Range 8V to 18V $ Low Stand-by Current Consumption $$ Input Low 2.1mA (Max) $$ Input High 2.7mA (Max)
    IS7-1845ASRH-Q Renesas Electronics Corporation
  • Electrically Screened to DSCC SMD # 5962-01509
  • QML Qualified per MIL-PRF-38535 Requirements
  • Radiation Environment
    • High Dose Rate: 300krad(SI) (Max)
    • Low Dose Rate: 50krad(SI) (Max)
    • SEL Immune: Dielectrically Isolated
    • SEU Immune: 35MeV/mg/cm2
    • SEU Cross-Section at 89MeV/mg/cm2: 5x10-6cm2
  • Low Start-up Current: 100µA (Typ)
  • Fast Propagation Delay: 80ns (Typ)
  • Supply Voltage Range: 12V to 20V
  • High Output Drive: 1A (Peak, Typ)
  • Undervoltage Lockout: 8.8V Start (Typ), 8.2V Stop (Typ)
  •  

     

    APPLICATIONS

  • Current-Mode Switching Power Supplies
  • Control of High Current FET Drivers
  • Motor Speed and Direction Control
  • IS0-1845ASEH-Q Renesas Electronics Corporation
  • Electrically Screened to DSCC SMD # 5962-01509
  • QML Qualified per MIL-PRF-38535 Requirements
  • Radiation Environment
    • High Dose Rate: 300krad(SI) (Max)
    • Low Dose Rate: 50krad(SI) (Max)
    • SEL Immune: Dielectrically Isolated
    • SEU Immune: 35MeV/mg/cm2
    • SEU Cross-Section at 89MeV/mg/cm2: 5x10-6cm2
  • Low Start-up Current: 100µA (Typ)
  • Fast Propagation Delay: 80ns (Typ)
  • Supply Voltage Range: 12V to 20V
  • High Output Drive: 1A (Peak, Typ)
  • Undervoltage Lockout: 8.8V Start (Typ), 8.2V Stop (Typ)
  •  

     

    APPLICATIONS

  • Current-Mode Switching Power Supplies
  • Control of High Current FET Drivers
  • Motor Speed and Direction Control
  • ISL74422BRHQF Renesas Electronics Corporation $ QML Qualified per MIL-PRF-38535 Requirements $ Electrically Screened to DSCC SMD # 5962-03248 $ Radiation Environment $$ Total Dose (Max) 300krad(SI) $$ Latch-Up Immune $ IPEAK 9A (Min) $ TFALL (CL = 10nF) 135ns (Max) $ TRISE (CL = 10nF) 135ns (Max) $ Prop Delay High-Low (CL = 10nF) 175ns (Max) $ Prop Delay Low-High (CL = 10nF) 175ns (Max) $ Rising UVLO Threshold 7.5V (Max) $ Falling UVLO Threshold 6.0V (Min) $ UVLO Hysteresis 0.3V (Min) $ Wide Supply Voltage Range 8V to 18V $ Low Stand-by Current Consumption $$ Input Low 2.1mA (Max) $$ Input High 2.7mA (Max)
    ISL74422ARHQF Renesas Electronics Corporation $ QML Qualified per MIL-PRF-38535 Requirements $ Electrically Screened to DSCC SMD # 5962-01521 $ Radiation Environment $$ Total Dose (Max): 300krad(SI) $$ Latch-Up Immune $ IPEAK: 9A(Min) $ TF (CL = 10,000pF): 70ns(Typ); 90ns(Max) $ TR (CL = 10,000pF): 90ns(Typ); 105ns(Max) $ Prop Delay High-Low (CL = 10,000pF): 75ns(Max), 55ns(Typ) $ Prop Delay Low-High (CL = 10,000pF): 50ns(Max), 30ns(Typ) $ Consistent Delay Times with VCC Changes $ Wide Supply Voltage Range: 7V to 18V $ Low Stand-by Power Consumption $$ Input Low: <2mW(Max) $$ Inputs High: <18mW(Max) $ ESD Protected: >1750V
    IS9-1845ASRH-Q Renesas Electronics Corporation
  • Electrically Screened to DSCC SMD # 5962-01509
  • QML Qualified per MIL-PRF-38535 Requirements
  • Radiation Environment
    • High Dose Rate: 300krad(SI) (Max)
    • Low Dose Rate: 50krad(SI) (Max)
    • SEL Immune: Dielectrically Isolated
    • SEU Immune: 35MeV/mg/cm2
    • SEU Cross-Section at 89MeV/mg/cm2: 5x10-6cm2
  • Low Start-up Current: 100µA (Typ)
  • Fast Propagation Delay: 80ns (Typ)
  • Supply Voltage Range: 12V to 20V
  • High Output Drive: 1A (Peak, Typ)
  • Undervoltage Lockout: 8.8V Start (Typ), 8.2V Stop (Typ)
  •  

     

    APPLICATIONS

  • Current-Mode Switching Power Supplies
  • Control of High Current FET Drivers
  • Motor Speed and Direction Control
  • IS9-1845ASRH/PROTO Renesas Electronics Corporation
  • Electrically Screened to DSCC SMD # 5962-01509
  • QML Qualified per MIL-PRF-38535 Requirements
  • Radiation Environment
    • High Dose Rate: 300krad(SI) (Max)
    • Low Dose Rate: 50krad(SI) (Max)
    • SEL Immune: Dielectrically Isolated
    • SEU Immune: 35MeV/mg/cm2
    • SEU Cross-Section at 89MeV/mg/cm2: 5x10-6cm2
  • Low Start-up Current: 100µA (Typ)
  • Fast Propagation Delay: 80ns (Typ)
  • Supply Voltage Range: 12V to 20V
  • High Output Drive: 1A (Peak, Typ)
  • Undervoltage Lockout: 8.8V Start (Typ), 8.2V Stop (Typ)
  •  

     

    APPLICATIONS

  • Current-Mode Switching Power Supplies
  • Control of High Current FET Drivers
  • Motor Speed and Direction Control
  • IS7-1845ASEH-Q Renesas Electronics Corporation
  • Electrically Screened to DSCC SMD # 5962-01509
  • QML Qualified per MIL-PRF-38535 Requirements
  • Radiation Environment
    • High Dose Rate: 300krad(SI) (Max)
    • Low Dose Rate: 50krad(SI) (Max)
    • SEL Immune: Dielectrically Isolated
    • SEU Immune: 35MeV/mg/cm2
    • SEU Cross-Section at 89MeV/mg/cm2: 5x10-6cm2
  • Low Start-up Current: 100µA (Typ)
  • Fast Propagation Delay: 80ns (Typ)
  • Supply Voltage Range: 12V to 20V
  • High Output Drive: 1A (Peak, Typ)
  • Undervoltage Lockout: 8.8V Start (Typ), 8.2V Stop (Typ)
  •  

     

    APPLICATIONS

  • Current-Mode Switching Power Supplies
  • Control of High Current FET Drivers
  • Motor Speed and Direction Control
  • IS9-1845ASEH-Q Renesas Electronics Corporation
  • Electrically Screened to DSCC SMD # 5962-01509
  • QML Qualified per MIL-PRF-38535 Requirements
  • Radiation Environment
    • High Dose Rate: 300krad(SI) (Max)
    • Low Dose Rate: 50krad(SI) (Max)
    • SEL Immune: Dielectrically Isolated
    • SEU Immune: 35MeV/mg/cm2
    • SEU Cross-Section at 89MeV/mg/cm2: 5x10-6cm2
  • Low Start-up Current: 100µA (Typ)
  • Fast Propagation Delay: 80ns (Typ)
  • Supply Voltage Range: 12V to 20V
  • High Output Drive: 1A (Peak, Typ)
  • Undervoltage Lockout: 8.8V Start (Typ), 8.2V Stop (Typ)
  •  

     

    APPLICATIONS

  • Current-Mode Switching Power Supplies
  • Control of High Current FET Drivers
  • Motor Speed and Direction Control
  • ISL74422BRHVX Renesas Electronics Corporation $ QML Qualified per MIL-PRF-38535 Requirements $ Electrically Screened to DSCC SMD # 5962-03248 $ Radiation Environment $$ Total Dose (Max) 300krad(SI) $$ Latch-Up Immune $ IPEAK 9A (Min) $ TFALL (CL = 10nF) 135ns (Max) $ TRISE (CL = 10nF) 135ns (Max) $ Prop Delay High-Low (CL = 10nF) 175ns (Max) $ Prop Delay Low-High (CL = 10nF) 175ns (Max) $ Rising UVLO Threshold 7.5V (Max) $ Falling UVLO Threshold 6.0V (Min) $ UVLO Hysteresis 0.3V (Min) $ Wide Supply Voltage Range 8V to 18V $ Low Stand-by Current Consumption $$ Input Low 2.1mA (Max) $$ Input High 2.7mA (Max)
    ISL74422ARHVF Renesas Electronics Corporation $ QML Qualified per MIL-PRF-38535 Requirements $ Electrically Screened to DSCC SMD # 5962-01521 $ Radiation Environment $$ Total Dose (Max): 300krad(SI) $$ Latch-Up Immune $ IPEAK: 9A(Min) $ TF (CL = 10,000pF): 70ns(Typ); 90ns(Max) $ TR (CL = 10,000pF): 90ns(Typ); 105ns(Max) $ Prop Delay High-Low (CL = 10,000pF): 75ns(Max), 55ns(Typ) $ Prop Delay Low-High (CL = 10,000pF): 50ns(Max), 30ns(Typ) $ Consistent Delay Times with VCC Changes $ Wide Supply Voltage Range: 7V to 18V $ Low Stand-by Power Consumption $$ Input Low: <2mW(Max) $$ Inputs High: <18mW(Max) $ ESD Protected: >1750V
    IS7-1845ASRH/PROTO Renesas Electronics Corporation
  • Electrically Screened to DSCC SMD # 5962-01509
  • QML Qualified per MIL-PRF-38535 Requirements
  • Radiation Environment
    • High Dose Rate: 300krad(SI) (Max)
    • Low Dose Rate: 50krad(SI) (Max)
    • SEL Immune: Dielectrically Isolated
    • SEU Immune: 35MeV/mg/cm2
    • SEU Cross-Section at 89MeV/mg/cm2: 5x10-6cm2
  • Low Start-up Current: 100µA (Typ)
  • Fast Propagation Delay: 80ns (Typ)
  • Supply Voltage Range: 12V to 20V
  • High Output Drive: 1A (Peak, Typ)
  • Undervoltage Lockout: 8.8V Start (Typ), 8.2V Stop (Typ)
  •  

     

    APPLICATIONS

  • Current-Mode Switching Power Supplies
  • Control of High Current FET Drivers
  • Motor Speed and Direction Control
  • ISL74422ARHF/PROTO Renesas Electronics Corporation $ QML Qualified per MIL-PRF-38535 Requirements $ Electrically Screened to DSCC SMD # 5962-01521 $ Radiation Environment $$ Total Dose (Max): 300krad(SI) $$ Latch-Up Immune $ IPEAK: 9A(Min) $ TF (CL = 10,000pF): 70ns(Typ); 90ns(Max) $ TR (CL = 10,000pF): 90ns(Typ); 105ns(Max) $ Prop Delay High-Low (CL = 10,000pF): 75ns(Max), 55ns(Typ) $ Prop Delay Low-High (CL = 10,000pF): 50ns(Max), 30ns(Typ) $ Consistent Delay Times with VCC Changes $ Wide Supply Voltage Range: 7V to 18V $ Low Stand-by Power Consumption $$ Input Low: <2mW(Max) $$ Inputs High: <18mW(Max) $ ESD Protected: >1750V
    ISL3282EMRTEP-TK Renesas Electronics Corporation $ Specifications per DSCC VID V6210601 $ Full military temperature electrical performance from -55°C to +125°C $ Controlled baseline with one wafer fabrication site and one assembly/test site $ Full homogeneous lot processing in wafer fab $ No combination of wafer fabrication lots in assembly $ Full traceability through assembly and test by date/trace code assignment $ Enhanced process change notification $ Enhanced obsolescence management $ Eliminates need for up-screening a COTS component $ ±16.5kV IEC61000 ESD protection on RS-485 inputs $ Class 3 ESD level on all other pins: >5kV HBM $ Wide supply rang: 3.0V to 5.5V $ Specified for +125°C operation $ Logic supply pin (VL) eases operation in mixed supply systems $ Full fail-safe (open, short, terminated/undriven) $ True 1/8 unit load allows up to 256 devices on the bus $ High data rates: up to 16Mbps $ Low quiescent supply current: 500μA (maximum) $ Very low shutdown supply current: 20μA (maximum) $ -7V to +12V common-mode input voltage range $ Tri-statable Rx available (active low or high EN input) $ 5V tolerant logic inputs when VCC ≤ 5V
    ISL22326WMVEP Renesas Electronics Corporation $ Specifications per DSCC VID V62/08604-01XE $ Full Mil-Temp Electrical Performance from -55°C to +125°C $ Controlled Baseline with One Wafer Fabrication Site and One Assembly/Test Site $ Full Homogeneous Lot Processing in Wafer Fab $ No Combination of Wafer Fabrication Lots in Assembly $ Full Traceability Through Assembly and Test by Date/Trace Code Assignment $ Enhanced Process Change Notification $ Enhanced Obsolescence Management $ Eliminates Need for Up-Screening a COTS Component $ Two Potentiometers in One Package $ 128 Resistor Taps $ I2C Serial Interface $$ Three Address Pins, Up To Eight Devices/Bus $ Non-volatile Storage of Wiper Position $ Wiper Resistance: 70Ω Typical @ 3.3V $ Shutdown Mode $ Shutdown Current 5µA Max $ Power Supply: 2.7V to 5.5V $ 10kΩ Total Resistance $ High Reliability $$ Endurance: 1,000,000 Data Changes Per Bit Per Register $$ Register Data Retention: $$ 10 years @ T ≤ +125°C $$ 15 years @ T ≤ +90°C $$ 50 years @ T ≤ +55°C $ 14 Ld TSSOP
    ISL22346WMVEP-TK Renesas Electronics Corporation $ Specifications per DSCC VID V62/08605-01XE $ Full Mil-Temp Electrical Performance from -55°C to +125°C $ Controlled Baseline with One Wafer Fabrication Site and One Assembly/Test Site $ Full Homogeneous Lot Processing in Wafer Fab $ No Combination of Wafer Fabrication Lots in Assembly $ Full Traceability Through Assembly and Test by Date/Trace Code Assignment $ Enhanced Process Change Notification $ Enhanced Obsolescence Management $ Eliminates Need for Up-Screening a COTS Component $ Four Potentiometers in One Package $ 128 Resistor Taps $ I2C Serial Interface $$ Three Address Pins, Up To Eight Devices/Bus $ Non-volatile Storage of Wiper Position $ Wiper Resistance: 70Ω Typical @ 3.3V $ Shutdown Mode $ Shutdown Current 5µA Max $ Power Supply: 2.7V to 5.5V $ 10kΩ Total Resistance $ High Reliability $$ Endurance: 1,000,000 Data Changes Per Bit Per Register $$ Register Data Retention: $$ 10 years @ T ≤ +125°C $$ 15 years @ T ≤ +90°C $$ 50 years @ T ≤ +55°C $ 20 Ld TSSOP
    ISL22316WMUEP Renesas Electronics Corporation $ Specifications per DSCC VID V62/08603-01XB $ Full Mil-Temp Electrical Performance from -55°C to +125°C $ Controlled Baseline with One Wafer Fabrication Site and One Assembly/Test Site $ Full Homogeneous Lot Processing in Wafer Fab $ No Combination of Wafer Fabrication Lots in Assembly $ Full Traceability Through Assembly and Test by Date/Trace Code Assignment $ Enhanced Process Change Notification $ Enhanced Obsolescence Management $ Eliminates Need for Up-Screening a COTS Component $ 128 Resistor Taps $ I2C Serial Interface $$ Two Address Pins, Up To Four Devices/Bus $ Non-volatile Storage of Wiper Position $ Wiper Resistance: 70Ω Typical @ 3.3V $ Shutdown Mode $ Shutdown Current 5µA Max $ Power Supply: 2.7V to 5.5V $ 10kΩ Total Resistance $ High Reliability $$ Endurance: 1,000,000 Data Changes Per Bit Per Register $$ Register Data Retention: $$ 10 years @ T ≤ +125°C $$ 15 years @ T ≤ +90°C $$ 50 years @ T ≤ +55°C $ 10 Ld MSOP
    ISLA112P25MREP Renesas Electronics Corporation $ Programmable Gain, Offset and Skew Control $ 1.3GHz Analog Input Bandwidth $ 60fs Clock Jitter $ Over-Range Indicator $ Selectable Clock Divider: ÷1, ÷2 or ÷4 $ Clock Phase Selection $ Nap and Sleep Modes $ Two's Complement, Gray Code or Binary Data Format $ SDR/DDR LVDS-Compatible or LVCMOS Outputs $ Programmable Built-in Test Patterns $ Single-Supply 1.8V Operation $ Pb-Free (RoHS Compliant)
    VID Features $ Specifications per DSCC VID V62/10609 $ Full Military Temperature Electrical Performance from -55°C to +125°C $ Controlled Baseline with One Wafer Fabrication Site and One Assembly/Test Site $ Full Homogeneous Lot Processing in Wafer Fab $ No Combination of Wafer Fabrication Lots in Assembly $ Full Traceability Through Assembly and Test by $ Date/Trace Code Assignment $ Enhanced Process Change Notification $ Enhanced Obsolescence Management $ Eliminates Need for Up-Screening a COTS Component
    ISL22316WMUEP-TK Renesas Electronics Corporation $ Specifications per DSCC VID V62/08603-01XB $ Full Mil-Temp Electrical Performance from -55°C to +125°C $ Controlled Baseline with One Wafer Fabrication Site and One Assembly/Test Site $ Full Homogeneous Lot Processing in Wafer Fab $ No Combination of Wafer Fabrication Lots in Assembly $ Full Traceability Through Assembly and Test by Date/Trace Code Assignment $ Enhanced Process Change Notification $ Enhanced Obsolescence Management $ Eliminates Need for Up-Screening a COTS Component $ 128 Resistor Taps $ I2C Serial Interface $$ Two Address Pins, Up To Four Devices/Bus $ Non-volatile Storage of Wiper Position $ Wiper Resistance: 70Ω Typical @ 3.3V $ Shutdown Mode $ Shutdown Current 5µA Max $ Power Supply: 2.7V to 5.5V $ 10kΩ Total Resistance $ High Reliability $$ Endurance: 1,000,000 Data Changes Per Bit Per Register $$ Register Data Retention: $$ 10 years @ T ≤ +125°C $$ 15 years @ T ≤ +90°C $$ 50 years @ T ≤ +55°C $ 10 Ld MSOP
    ISL22326WMVEP-TK Renesas Electronics Corporation $ Specifications per DSCC VID V62/08604-01XE $ Full Mil-Temp Electrical Performance from -55°C to +125°C $ Controlled Baseline with One Wafer Fabrication Site and One Assembly/Test Site $ Full Homogeneous Lot Processing in Wafer Fab $ No Combination of Wafer Fabrication Lots in Assembly $ Full Traceability Through Assembly and Test by Date/Trace Code Assignment $ Enhanced Process Change Notification $ Enhanced Obsolescence Management $ Eliminates Need for Up-Screening a COTS Component $ Two Potentiometers in One Package $ 128 Resistor Taps $ I2C Serial Interface $$ Three Address Pins, Up To Eight Devices/Bus $ Non-volatile Storage of Wiper Position $ Wiper Resistance: 70Ω Typical @ 3.3V $ Shutdown Mode $ Shutdown Current 5µA Max $ Power Supply: 2.7V to 5.5V $ 10kΩ Total Resistance $ High Reliability $$ Endurance: 1,000,000 Data Changes Per Bit Per Register $$ Register Data Retention: $$ 10 years @ T ≤ +125°C $$ 15 years @ T ≤ +90°C $$ 50 years @ T ≤ +55°C $ 14 Ld TSSOP
    ISL22346WMVEP Renesas Electronics Corporation $ Specifications per DSCC VID V62/08605-01XE $ Full Mil-Temp Electrical Performance from -55°C to +125°C $ Controlled Baseline with One Wafer Fabrication Site and One Assembly/Test Site $ Full Homogeneous Lot Processing in Wafer Fab $ No Combination of Wafer Fabrication Lots in Assembly $ Full Traceability Through Assembly and Test by Date/Trace Code Assignment $ Enhanced Process Change Notification $ Enhanced Obsolescence Management $ Eliminates Need for Up-Screening a COTS Component $ Four Potentiometers in One Package $ 128 Resistor Taps $ I2C Serial Interface $$ Three Address Pins, Up To Eight Devices/Bus $ Non-volatile Storage of Wiper Position $ Wiper Resistance: 70Ω Typical @ 3.3V $ Shutdown Mode $ Shutdown Current 5µA Max $ Power Supply: 2.7V to 5.5V $ 10kΩ Total Resistance $ High Reliability $$ Endurance: 1,000,000 Data Changes Per Bit Per Register $$ Register Data Retention: $$ 10 years @ T ≤ +125°C $$ 15 years @ T ≤ +90°C $$ 50 years @ T ≤ +55°C $ 20 Ld TSSOP
    DSCC 's PackagesDSCC 's pdf datasheet



    DSCC Pinout, Pinouts
    DSCC pinout,Pin out
    This is one package pinout of DSCC,If you need more pinouts please download DSCC's pdf datasheet.

    DSCC circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

    Related Electronics Part Number

    Related Keywords:

    DSCC Pb-Free DSCC Cross Reference DSCC Schematic DSCC Distributor
    DSCC Application Notes DSCC RoHS DSCC Circuits DSCC footprint