• Product pinout
  • Description
  • CD74HC85,4-Bit Magnitude Comparator
  • The HC85 and HCT85 are high speed magnitude comparators that use silicon-gate CMOS technology to achieve operating speeds similar to LSTTL with the low power consumption of standard CMOS integrated circuits.
    These 4-bit devices compare two binary, BCD, or ...
  • CD74HCT85,4-Bit Magnitude Comparator
  • The HC85 and HCT85 are high speed magnitude comparators that use silicon-gate CMOS technology to achieve operating speeds similar to LSTTL with the low power consumption of standard CMOS integrated circuits.
    These 4-bit devices compare two binary, BCD, or ...
  • SN74ALS679,12-Bit Address Comparators
  • This 12-bit address comparator simplifies addressing of memory boards and/or other peripheral devices. The four P inputs are normally hardwired with a preprogrammed address. An internal decoder determines what input information applied to the A inputs must be ...
  • SN74AS885,Octal Magnitude Comparators
  • These advanced Schottky devices are capable of performing high-speed arithmetic or logic comparisons on two 8-bit binary or two\'s complement words. Two fully decoded decisions about words P and Q are externally available at two outputs. These devices are ...
  • SN74LS682,8-Bit Identity/Magnitude Comparators
  • These magnitude comparators perform comparisons of two eight-bit binary or BCD words. All types provide P = Q outputs and all except \'LS688 provide P > Q outputs as well. The \'LS682, \'LS684, \'LS686, and \'LS688 have totem-pole outputs, while the \'LS685 ...
  • SN74LS684,8-Bit Identity/Magnitude Comparators
  • These magnitude comparators perform comparisons of two eight-bit binary or BCD words. All types provide P = Q outputs and all except \'LS688 provide P > Q outputs as well. The \'LS682, \'LS684, \'LS686, and \'LS688 have totem-pole outputs, while the \'LS685 ...
  • SN74LS85,4-bit Magnitude Comparators
  • These four-bit magnitude comparators perform comparison of straight binary and straight BCD (8-4-2-1) codes. Three fully decoded decisions about two 4-bit words (A, B) are made and are externally available at three outputs. These devices are fully expandable ...
  • SN74S85,4-bit Magnitude Comparators
  • These four-bit magnitude comparators perform comparison of straight binary and straight BCD (8-4-2-1) codes. Three fully decoded decisions about two 4-bit words (A, B) are made and are externally available at three outputs. These devices are fully expandable ...
  • 54AC520,8-Bit Identity Comparator [Life-time Buy]
  • The 54AC520 are expandable 8-bit comparators. They compare two words of up to eight bits each and provide a LOW output when the two words match bit for bit. The expansion input I#A = B also serves as an active LOW enable input.
    ...
  • 54AC521,8-Bit Identity Comparator
  • The 54AC521 is an expandable 8-bit comparator. It compares two words of up to eight bits each and provides a LOW output when the two words match bit for bit. The expansion input I#A = B also serves as an active LOW enable input.
    ...
  • 74AC521,8-Bit Identity Comparator
  • The AC/ACT521 is an expandable 8-bit comparator 74AC521 . It compares two words of up to eight bits each and provides a LOW output when the two words match bit for bit. The expansion input I#A = B also serves as an active LOW enable input.
    ...
  • MM74HC688,8-Bit Magnitude Comparator (Equality Detector)
  • The MM74HC688 equality detector utilizes advanced silicon-gate CMOS technology to compare bit for bit two 8-bit words and indicates whether or not they are equal. The P#=Q# output indicates equality when it is LOW. A single active low enable is provided to ...
  • 74ACT521,8-Bit Identity Comparator
  • The 74ACT521 is an expandable 8-bit comparator 74ACT521 . It compares two words of up to eight bits each and provides a LOW output when the two words match bit for bit. The expansion input I#A = B also serves as an active LOW enable input.
    ...
  • DM74ALS520,8-Bit Comparator
  • These comparators perform an \"equal to\" comparison of two 8-bit words with provision for expansion or external enabling. The matching of the two 8-bit input plus a logic LOW on the EN# input produces the output A# = B# on the DM74ALS520 and DM74ALS521. The ...
  • HS-139RH,Rad-Hard Quad Voltage Comparator
  • The Radiation Hardened HS-139RH consists of four independent single or dual supply voltage comparators on a single monolithic substrate. The common mode input voltage range includes ground, even when operated from a single supply, and the low supply current ...
  • HCTS85MS,Rad-Hard 4-Bit Magnitude Comparator
  • The Intersil HCTS85MS is a Radiation Hardened 4-bit high speed magnitude comparator. This device compares two binary, BCD, or other monotonic codes and presents the three possible magnitude results at the outputs (A>B, A
  • 74F521,74F521 8-bit Identity Comparator
  • The 74F521 is an expandable 8-bit comparator. It compares two words of up to 8 bits each and provides a Low output when the two words match bit for bit. The expansion input IA=B also serves as an active-Low enable input.
    ...
  • 74F85,74F85 4-bit Magnitude Comparator
  • The 74F85 is a 4-bit magnitude comparator that can be expanded to almost any length. It compares two 4-bit binary, BCD, or other monotonic codes and presents the three possible magnitude results at the outputs. The 4-bit inputs are weighted (A0,A3) and (B0,B3) ...
  • 74HCT688,74HC/HCT688 8-bit Magnitude Comparator
  • The 74HC/HCT688 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT688 are 8-bit magnitude comparators. They perform comparison of two 8-bit ...
  • 74HCT85,74HC/HCT85 4-bit Magnitude Comparator
  • The 74HC/HCT85 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT85 are 4-bit magnitude comparators that can be expanded to almost any ...
  • HCF4063,4-BIT MAGNITUDE COMPARATOR
  • The HCF4063B is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages. The HCF4063B is a low power 4-bit magnitude comparator designed for use in computer and logic applications that require ...
  • TC74HC688AF,8-Bit Equality Comparator
  • The TC74HC688A is a high speed CMOS 8-BIT EQUALITY 2 COMPARATOR fabricated with silicon gate C MOS technology. It achieves the high speed operation similar to equivalent LSTTL while maintaining the CMOS low power dissipation. The TC74HC688A compares ...
  • TC74HC85AF,4-Bit Magnitude Comparator
  • The TC74HC85A is a high speed CMOS 4 BIT MAGNITUDE 2 COMPARATOR fabricated with silicon gate C MOS technology. It achieves the high speed operation similar to equivalent LSTTL while maintaining the CMOS low power dissipation. The TC74HC85A compares ...
  • TC74HCT688AF,8-Bit Equality Comparator
  • The TC74HCT688A is a high speed CMOS 8-BIT EQUALITY 2 COMPARATOR fabricated with silicon gate C MOS technology. It achieves the high speed operation similar to equivalent LSTTL while maintaining the CMOS low power dissipation. ...
  • TC74AC521F,8-Bit Equality Comparator
  • The TC74AC521 is an advanced high speed CMOS 8-BIT DIGITAL COMPARATOR fabricated with silicon gate and 2 double-layer metal wiring C MOS technology. ...
  • HD74HC679,12-bit Address Comparator
  • The HD74HC679 address comparator simplifies addressing of memory boards and/or other peripheral devices. The four P inputs are normally hard wired with a preprogrammed address. An internal decoder determines what input information applied to the 12 A ...
  • HD74HC680,12-bit Address Comparator
  • The HD74HC680 address comparator simplifies addressing of memory boards and/or other peripheral devices. The four P inputs are normally hard wired with a preprogrammed address. An internal decoder determines what input information applied to the 12 A ...
  • HD74HC688,8-bit Magnitude Comparator
  • The HD74HC688 compares bit for bit two 8-bit words and indicates whether or not they are equal. The P=Q output indicates equality when it is low. A single active low enable is provided to facilitate cascading of several packages and enable comparison of ...
  • HD74HC85,4-bit Magnitude Comparator
  • The HD74HC85 is designed for high speed comparison of two four bit words. This circuit has eight comparison input, 4 for each word; three cascade inputs (A < B, A > B, A = B); and three decision outputs (A < B, A > B, A = B). The result of a comparison ...
  • HD74HCT688,8-bit Magnitude Comparator
  • The HD74HCT688 compares bit for bit two 8-bit words and indicates whether or not they are equal. The P=Q output indicates equality when it is low. A single active low enable is provided to facilitate cascading of several packages and enable comparison of ...
  • CD4585BMS,CMOS 4-Bit Magnitude Comparator
  • CMOS 4-Bit Magnitude Comparator,CD4585BMS is a 4-bit magnitude comparator designed for use in computer and logic applications that require the com- parison of two 4-bit words. This logic circuit determines whether one 4-bit word (Binary or BCD) is less ...
  • 74HC85,4-bit Magnitude Comparator
  • The 74HC/HCT85 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT85 are 4-bit magnitude comparators that can be expanded to almost any ...
  • 74HC688,8-bit Magnitude Comparator
  • The 74HC/HCT688 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT688 are 8-bit magnitude comparators. They perform comparison of two ...