The TRF1112 / TRF1212 are UHF-VHF down converters with integrated UHF and S-band frequency synthesizers for radio applications in the 2GHz to 4GHz range. The device integrates an image reject mixer, IF gain blocks, automatic gain control (AGC), and two ...
The TRF1115 is the first of two ASICs used in the receiver section of Texas Instruments MMDS/MDS/WCS/802.16x chipset. The TRF1115 down-converts the input frequency to an IF frequency in the range of 420 MHz to 480 MHz. The device provides a differential output ...
The TRF1121/TRF1221 are VHF-UHF upconverters with integrated UHF and S-band frequency synthesizers for radio applications in the 2GHz to 4 GHz range. The IC performs the first up-conversion and generates the local oscillator (LO) for the second up-conversion. ...
The GC4016 quad receiver chip contain four identical down-conversion circuits. Each downconvert circuit accepts a real sample rate up to 100 MHz, down converts a selected carrier frequency to zero, decimates the signal rate by a programmable factor ranging ...
The GC4116 quad transmit chip contains four identical up-conversion channels. The up-convert channels accept real or complex signals, interpolate them by programmable amounts ranging from 32 to 5,792, and modulates them up to selected center frequencies. The ...
The GC5016 is a flexible wideband 4-channel digital up-converter and down-converter. The GC5016 is designed for high-speed, high bandwidth digital signal processing applications like 3G cellular base transceiver station transmit and receive channels. The ...
The GC5018 is a multi-channel communications signal processor that provides digital downconversion optimized for cellular base transceiver systems. The device supports UMTS, CDMA-1X and TD-SCDMA air interface cellular standards. The chip provides up to 8 UMTS ...
The GC5316 is a high-density multi-channel communications signal processor integrated circuit that provides both digital downconversion and digital upconversion optimized for cellular base transceiver systems. The device supports both UMTS and CDMA2000 (CDMA) ...
The TRF1112 / TRF1212 are UHF-VHF down converters with integrated UHF and S-band frequency synthesizers for radio applications in the 2GHz to 4GHz range. The device integrates an image reject mixer, IF gain blocks, automatic gain control (AGC), and two ...
The TRF1216 is the first of two integrated circuits used in the receiver section of Texas Instruments? 3.5-GHz radio chipset. The TRF1216 down-converts the 3.5-GHz input frequency to an intermediate frequency in the range of 400 MHz to 500 MHz. The device ...
The TRF1121/TRF1221 are VHF-UHF upconverters with integrated UHF and S-band frequency synthesizers for radio applications in the 2GHz to 4 GHz range. The IC performs the first up-conversion and generates the local oscillator (LO) for the second up-conversion. ...
The AD9860/AD9862 receive path includes dual high-performance, 10-/12-bit, 64 MSPS analog to digital converters, with input buffers, programmable gain amplifiers, and decimation filters. The transmit path contains dual high-performance 12-/14-bit 128 MSPS ...
The AD6636 is a (Digital) Receive Signal Processor intended for direct IF sampling or highly sampled baseband radios requiring
wide-bandwidth input signals. It has been optimized for the
demanding filtering requirements of wideband standards
like, CDMA2000, ...
The Digital Down Converter (DDC) HSP50016 is a single chip
synthesizer, quadrature mixer and lowpass filter. Its input
data is a sampled data stream of up to 16 bits in width and
up to a 75 MSPS data rate. The DDC performs down
conversion, narrowband low ...
The HSP50214B Programmable Downconverter converts digitized IF data into filtered baseband data which can be processed by a standard DSP microprocessor. The Programmable Downconverter (PDC) performs down conversion, decimation, narrowband low pass ...
The HSP50216 Quad Programmable Digital Downconverter (QPDC) is designed for high dynamic range applications such as cellular basestations where multiple channel processing is required in a small physical space. The QPDC combines into a single package, a set of ...
The ISL5216 Quad Programmable Digital Downconverter (QPDC) is designed for high dynamic range applications such as cellular basestations where multiple channel processing is required in a small physical space. The QPDC combines into a single package a set of ...
The ISL5416 Four-Channel Wideband Programmable Digital DownConverter (WPDC) is designed for high dynamic range applications such as cellular basestations where the processing of multiple channels is required in a small physical space. The WPDC combines four ...
The LT5512 is an active double-balanced mixer IC, optimized for high linearity HF, VHF and UHF applications. The IC includes an integrated LO buffer amplifi er to drive the mixer and an RF buffer amplifi er for improved LO-RF isolation. Internal bias circuits ...
The LT5522 active downconverting mixer is optimized for high linearity downconverter applications including cable and wireless infrastructure. The IC includes a high speed differential LO buffer amplifier driving a double-balanced mixer. The LO buffer is ...
The LT5525 is a low power broadband mixer optimized for high linearity applications such as point-to-point data transmission, high performance radios and wireless infrastructure systems. The device includes an internally 50& matched high speed LO amplifier ...
The LT5526 is a low power broadband mixer optimized for high linearity applications such as point-to-point data transmission, cable infrastructure and wireless infrastructure systems. The device includes an internally matched high speed LO amplifier driving a ...
The LT5527 active mixer is optimized for high linearity, wide dynamic range downconverter applications. The IC includes a high speed differential LO buffer amplifier driving a double-balanced mixer. Broadband, integrated transformers on the RF and LO inputs ...
The LT5557 active mixer is optimized for high linearity, wide dynamic range downconverter applications. The IC includes a high speed differential LO buffer amplifier driving a double-balanced mixer. Broadband, integrated transformers on the RF and LO inputs ...
The ATR2730 is a monolithically integrated L-band down-converter circuit fabricated
,
with Atmel s advanced UHF5S technology. This IC covers all functions of an L-ban
down-converter in a DAB receiver. The device includes a gain-controlled amplifier, ...
The ATR2730 is a monolithically integrated L-band down-converter circuit fabricated
,
with Atmel s advanced UHF5S technology. This IC covers all functions of an L-ban
down-converter in a DAB receiver. The device includes a gain-controlled amplifier, ...
The down converter IC ATR2809 is fabricated in Atmel\'s powerful SiGe bipolar
process.
The single ended RF input signal is differentially converted and down (or up) con-
verted by a triple balanced Gilbert-cell mixer. ...
The MAX2680/MAX2681/MAX2682 miniature, low-cost, low-noise downconverter mixers are designed for low-voltage operation and are ideal for use in portable communications equipment. Signals at the RF input port are mixed with signals at the local oscillator (LO) ...
The MAX2680/MAX2681/MAX2682 miniature, low-cost, low-noise downconverter mixers are designed for low-voltage operation and are ideal for use in portable communications equipment. Signals at the RF input port are mixed with signals at the local oscillator (LO) ...
The MAX2680/MAX2681/MAX2682 miniature, low-cost, low-noise downconverter mixers are designed for low-voltage operation and are ideal for use in portable communications equipment. Signals at the RF input port are mixed with signals at the local oscillator (LO) ...
The MAX2021 low-noise, high-linearity, direct upconversion/downconversion quadrature modulator/demodulator is designed for RFID handheld and portal readers, as well as single and multicarrier 750MHz to 1200MHz GSM/EDGE, cdma2000, WCDMA, and iDEN base-station ...
The MAX9995 dual, high-linearity, downconversion
mixer provides 6.1dB gain, +25.6dBm IIP3, and 9.8dB
NF for UMTS/WCDMA, DCS, and PCS base-station
applications. The MAX9995 is ideal for low-side LO
injection. (For a mixer variant optimized for high-side
LO ...
The MAX9994 high-linearity downconversion mixer provides 8.3dB gain, +26.2dBm IIP3, and 9.7dB NF for 1700MHz to 2200MHz UMTS/WCDMA, DCS, and PCS base-station receiver applications. With a 1400MHz to 2000MHz LO frequency range, this particular mixer is ideal ...
The MAX2039 high-linearity passive upconverter or
downconverter mixer is designed to provide 7.3dB NF
and a 7.1dB conversion loss for an RF frequency range
of 1700MHz to 2200MHz to support UMTS/WCDMA,
DCS, and PCS base-station transmitter or ...
The MAX9996 high-linearity downconversion mixer provides
8.3dB gain, +26.5dBm IIP3, and 9.7dB NF for
1700MHz to 2200MHz UMTS/W-CDMA, DCS, and PCS
base-station receiver applications. With a 1900MHz to
2400MHz LO frequency range, this particular mixer ...
The MAX9986 high-linearity downconversion mixer provides
10dB gain, +23.6dBm IIP3, and 9.3dB NF for
815MHz to 995MHz base-station receiver applications.
With a 960MHz to 1180MHz LO frequency range, this
particular mixer is ideal for high-side LO ...
The MAX2023 low-noise, high-linearity, direct upconversion/
downconversion quadrature modulator/demodulator
is designed for single and multicarrier 1500MHz to
2300MHz DCS 1800/PCS 1900 EDGE, cdma2000,
WCDMA, and PHS/PAS base-station applications.
Direct ...
The MAX9984 high-linearity downconversion mixer provides
8.1dB gain, +25dBm IIP3, and 9.3dB NF for
400MHz to 1000MHz base-station receiver applications .
With an optimized 570MHz to 850MHz LO frequency
range, this particular mixer is ideal for low-side
LO ...
The MAX2031 high-linearity passive upconverter or downconverter mixer is designed to provide +36dBm IIP3, 7dB NF, and 7dB conversion loss for an 815MHz to 1000MHz RF frequency range to support GSM/cellular base-station transmitter or receiver applications. ...
The MAX2406 low-noise amplifier (LNA)/downconverter mixer is designed for use over a wide range of frequencies and is optimized for communications systems operating at a frequency of 1.9GHz. Applications include PWT1900/DCT1900, DCS1800/PCS1900, PHS, and DECT. ...
The MAX2410 performs the RF front-end transmit/receive function in time-division-duplex (TDD) communication systems. It operates over a wide frequency range and is optimized for RF frequencies around 1.9GHz. Applications include most popular cordless and PCS ...
The MAX2411A performs the RF front-end transmit/receive function in time-division-duplex (TDD) communication systems. It operates over a wide frequency range and is optimized for RF frequencies around 1.9GHz. Applications include most popular cordless and PCS ...
The MAX2685\'s low-noise amplifier (LNA) and downconverter mixer comprise the major blocks of an RF front-end receiver. Optimized for 900MHz operation, the device\'s low noise figure, high gain, and high linearity make it ideal for cellular, cordless, and ...
The MAX2683/MAX2684 are super-high-performance, low-cost downconverter mixers intended for wireless local loop (WLL) and digital microwave radio (DMR) applications in the 3.4GHz to 3.8GHz frequency band. The MAX2683 is optimized for downconversion to IF ...
The MAX2683/MAX2684 are super-high-performance, low-cost downconverter mixers intended for wireless local loop (WLL) and digital microwave radio (DMR) applications in the 3.4GHz to 3.8GHz frequency band. The MAX2683 is optimized for downconversion to IF ...
The MAX2700/MAX2701 are highly integrated direct downconversion (zero-IF) receivers designed for wideband wireless local loop (WLL) systems operating in the 1.8GHz to 2.5GHz band. The MAX2700/MAX2701s zero-IF architecture eliminates the need for IF ...
The MAX2700/MAX2701 are highly integrated direct downconversion (zero-IF) receivers designed for wideband wireless local loop (WLL) systems operating in the 1.8GHz to 2.5GHz band. The MAX2700/MAX2701s zero-IF architecture eliminates the need for IF ...
The MAX2114 low-cost, direct-conversion tuner is designed for use in digital direct-broadcast satellite (DBS) television set-top box units. Its direct-conversion architecture reduces system cost compared to devices with IF-based architectures. The MAX2114 ...
The MAX2106 low-cost, direct-conversion tuner IC is designed for use in digital direct-broadcast satellite (DBS) television set-top box units and is a pin-for-pin upgrade for the MAX2104. Its direct-conversion architecture reduces system cost compared to ...
The MAX2041 high-linearity passive upconverter or
downconverter mixer is designed to provide 7.4dB NF
and a 7.2dB conversion loss for an RF frequency range
of 1700MHz to 3000MHz to support UMTS/WCDMA,
DCS, PCS, and WiMAX base-station transmitter ...
The MAX9986A high-linearity downconversion mixer provides 8.2dB gain, +25dBm IIP3, and 10dB NF for 815MHz to 1000MHz base-station receiver applications. With a 960MHz to 1180MHz LO frequency range, this particular mixer is ideal for high-side LO injection ...
The MAX9993 high-linearity down-conversion mixer provides 8.5dB of gain, +23.5dBm IIP3, and 9.5dB noise figure for UMTS, DCS, and PCS base-station applications. The MAX9993 integrates baluns in the RF and LO ports, a dual-input LO selectable switch, an LO ...
The HMC216MS8(HMC216MS8E) is an ultra miniature double-balanced FET mixers in an 8 lead plastic surface mount package (MSOP). This MMIC mixer is constructed of switched GaAs FETs and novel planar transformer baluns on the chip. In addition to an LO drive of +3 ...
The HMC296MS8(HMC296MS8E) is a low LO drive, high IP3 double-balanced FET mixer in an 8 lead plastic surface mount MSOP package. This MMIC mixer is constructed of switched GaAs FETs and novel planar transformer baluns on the chip. The device can be used as an ...
The HMC304MS8(HMC304MS8E) is a passive high IP3 mixer in 8 lead plastic surface mount Mini Small Outline Package (MSOP). This miniature single balanced MMIC mixer is constructed of GaAs Schottky diodes and novel planar transformer baluns on the chip while not ...
The HMC350MS8(HMC350MS8E) is a miniature single balanced mixers in 8 lead plastic surface mount package. The passive GaAs schottky diode mixer implements planar on chip baluns and requires no external components. The mixer can be used as an upconverter, down ...
The HMC351S8(HMC351S8E) is a double balanced mixer in 8 lead plastic surface mount package. The passive GaAs schottky diode mixer implements planar on chip baluns and requires no external components. The mixer can be used as an upconverter, down converter, or ...
The HMC483MS8G(HMC483MS8GE) is a high dynamic range passive MMIC mixer with an integrated LO amplifier in plastic surface mount 8 lead Mini Small Outline Package (MSOP) covering 0.7 to 1.4 GHz. Excellent input IP3 performance of +33 dBm for down ...
The TA4303F is a monolithic IC to down-convert the L-band
(900~2150 MHz) signal for the satellite tuners. It\'s integrated
circuits that perform the mixer/oscillator function. They have
double-balanced mixer, local oscillator, IF amplifier, OSC buffer ...
The TA1296FN is a wideband down-converter which can
operate at input frequency ranging from 850 MHz to 2200 MHz.
Intended primarily for use in satellite tuners, this IC includes an
oscillator, a mixer, an IF amplifier and a PLL.
2
The I C bus data ...
The TA1322FN is a wideband down-converter which can
operate at input frequency ranging from 850 MHz to 2200 MHz.
Intended primarily for use in satellite tuners, this IC includes an
oscillator, a mixer, an IF amplifier and a PLL.
2
The I C bus data ...
The uPC3228T5S is a silicon bipolar monolithic IC designed for use as IF down-converter for digital TV, digital
CATV. This IC consists of AGC amplifier, mixer and video amplifier.
The package is 32-pin plastic QFN (Quad Flat Non-lead) package suitable ...
uPC3220GR datasheets LOW DISTORTION DOWN-CONVERTER IC FOR DIGITAL CATV The uPC3220GR is a silicon monolithic IC designed for use as IF down-converter for digital CATV. This IC
consists of AGC amplifier, mixer and video amplifier. ...
The uPC2798GR is a Silicon monolithic IC designed for use as QAM IF down convertor for digital CATV. This IC
consists of AGC amplifier, mixer, oscillator, and video amplifier.
The package is 20 pins SSOP suitable for high-density surface mount. ...
The CXA3355AER is an IC developed as a GPS RF down converter. This IC realizes a reduction in the number
of external parts by integrating an LNA, image rejection mixer, IF filter, PLL and VCO (L, C) into a small
package with low current ...
The CXA3355ER is an IC developed as a GPS RF
down converter. This IC realizes a reduction in the
number of external parts by integrating an LNA,
image rejection mixer, IF filter, PLL and VCO (L, C)
into a small package with low current consumption. ...
The CXG7001FN is a MMIC consisting of the
power amplifier, antenna switch and low noise down
conversion mixer.
This IC is designed using the Sonys GaAs J-FE
process featuring a single positive power supply
operation. ...
The CXG7003FN is a MMIC consisting of the
power amplifier, diversity antenna supported switch
and low noise down conversion mixer.
This IC is designed using the Sonys GaAs J-FE
process featuring a single positive power supply
operation. ...
The SKY73035 is a fully integrated single mixer that includes
Local Oscillator (LO) drivers, an LO switch, high linearity mixers,
and large dynamic range Intermediate Frequency (IF) amplifiers.
Low loss RF baluns have also been included to reduce design ...
SKY73033 1700-2200 MHz HIgh Gain and Linearity Single Downconversion Mixer for 2G/3G Transceivers
The SKY73033 is a fully integrated single mixer that includes LO drivers, an LO switch, high linearity mixers, and large dynamic range IF amplifiers. Low loss ...
The SKY73070 is a fully integrated single mixer that includes an LO driver, high linearity mixer, and a large dynamic range IF amplifier. A low loss RF balun has also been included to reduce design complications and lower system cost.
A low IIP3 and NF ...
SKY73032 700-1000 MHz High Gain and Linearity Single Downconversion Mixer for 2G/3G Transceivers
The SKY73032 is a fully integrated single mixer that includes LO drivers, an LO switch, high linearity mixers, and large dynamic range IF amplifiers. Low loss ...
The SKY73062 is a fully integrated up/downconversion mixer that
includes a Local Oscillator (LO) driver, an LO switch, and a high
linearity mixer. A low loss RF balun has also been included to
reduce design complications and lower system cost.
The ...
The SKY73069 is a fully integrated up/downconversion mixer that
includes a Local Oscillator (LO) driver, an LO switch, and a high
linearity mixer. A low loss RF balun has also been included to
reduce design complications and lower system cost.
The ...
The SKY73020 is a fully integrated diversity mixer that includes
Local Oscillator (LO) drivers, an LO switch, high linearity mixers,
and large dynamic range Intermediate Frequency (IF) amplifiers.
Low-loss RF baluns have also been included to reduce ...
The SKY73021 is a fully integrated diversity mixer that includes
Local Oscillator (LO) drivers, an LO switch, high linearity mixers,
and large dynamic range Intermediate Frequency (IF) amplifiers.
Low loss RF baluns have also been included to reduce ...
1700-2200 MHz High Gain & Linearity Diversity Downconversion Mixer
The SKY73023-11 is a fully integrated diversity mixer that includes LO drivers, an LO switch, high linearity mixers, and large dynamic range IF amplifiers. Low loss RF baluns have also been ...
The SKY73022-11 is a fully integrated diversity mixer that
includes Local Oscillator (LO) drivers, an LO switch, high linearity
mixers, and large dynamic range Intermediate Frequency (IF)
amplifiers. Low loss RF baluns have also been included to reduce ...
Avagos IAM-91563 is an economical 3V GaAs MMIC
mixer used for frequency down-conversion. RF fre-
quency coverage is from 0.8 to 6 GHz and IF coverage
is from 50 to 700 MHz. Packaged in the SOT-363 package,
this 4.0 sq. mm. package requires half the board ...